Spare Parts PRESTO 2011-09 (F07010546).indd

*)
PRESTO
Cod: F07010546
09 / 2011
*) Valido per Paesi UE
*) Valid for EU member countries
*) Gilt für EU-Mitgliedsländer
*) Valable dans le Pays UE
*) Válido para Países UE
*) Valabil pentru ţările UE
IT
PARTI DI RICAMBIO
EN
SPARE PARTS
ERSATZTEILE
PIECES DÉTACHÉES
DE
FR
ES
RO
PIEZAS DE REPUESTO
PIESE DE SCHIMB
PARTI DI RICAMBIO
PIECES DÈTACHÈES
Le ordinazioni delle parti di ricambio vanno fatte presso i nostri concessionari di zona e devono
essere sempre corredate dalle seguenti indicazioni:
- Tipo, modello e numero di matricola dell’attrezzatura. Tali dati sono stampigliati nell’apposita
targhetta di cui è dotata ogni attrezzatura.
- Numero di codice della parte richiesta rilevabile dal catalogo ricambi.
- Descrizione del particolare e quantità richiesta.
- Numero della tavola.
- Mezzo di trasporto. Nel caso questa voce non sia specificata, la Ditta Costruttrice, pur dedicando a questo servizio una particolare cura, non risponde di eventuali ritardi di spedizione dovuti
a cause di forza maggiore.
Le spese di trasporto si intendono sempre a carico del destinatario. La merce viaggia a rischio e
pericolo del committente anche se venduta franco destino.
NOTA: Il termine (Dx) Destro o (Sx) Sinistro della macchina o di parti di essa, è inteso guardando
la macchina dalla parte posteriore. Le eccezioni saranno indicate.
Les ordres doivent être effectués auprés de nos concessionaires de zone en précisant les
indications suivantes:
- Type, modéle et numéro de série de la machine. Ces données sont gravées sur la plaque
d’identification de chaque outil.
- Numéro de code de la piéce détachée indiqué sur le catalogue des piéces détachées.
- Description de la piéce et quantité requise.
- Numéro de plan.
- Moyen d’expédition. Si cette rubrique n’est pas indiquée, le Constructeur, bien que soucieux
de ce service, ne répond pas des retards d’expédition pour des causes de force majeure.
Les frais de transport sont toujours à la charge du destinataire. La marchandise voyage aux
risques et périls de l’acheteur même si vendue franco de port.
N.B.: Les références (Dx) droit et (Sx) gauche de la machine ou des parties de la même, est
entendue, comme de la figure, en regardant la machine de derriere dans le sens de marche.
SPARE PARTS
Orders must be transmitted through our area dealers and should always include the following
indications:
- Type, model and serial number of the machine. These data are punched on the data plate with
which every implement is equipped.
- Code number of the required spare part. This will be found in the spare parts catalogue.
- Description of the part and required quantity.
- Table number.
- Means of dispatch. If this item is not indicated, the Manufacturer, while dedicating particular
care to this service, shall not be held responsible for delays in delivery caused by cases of force
majeure.
Transport expenses shall always be at the consignee’s charge. The goods travel at the purchaser’s
risk and peril even when sold ex destination.
NOTE: The symbols (Dx) right and (Sx) left, concerning the machine or single parts of it, are
referred, as in the figure, to a rear view of them. Exceptions will be indicated.
ERSATZTEILE
Die Bestellungen müssen bei unseren Gebietshändrer aufgegeben werden. Bei der Bestellung
sind stets die folgenden Angaben zu machen:
- Typ, Modell und Serien-Nummer des Geräts. Diese Daten stehen auf dem Typenschild, mit
dem jedes Gerät versehen ist.
- Artikel Nr. der erforderlichen Ersatzteile. Diese stehen im Ersatzteil-Katalog.
- Beschreibung des Ersatzteils und die erforderliche Stückzahl.
- Tafelnummer.
- Versandmittel. Wenn dieser Punkt nicht spezifiziert wird, haftet die Herstellerfirma nicht für
etwaigen Lieferverzug aufgrund höherer Gewalt, auch wenn er diesen Service besonders aufmerksam abwickelt.
Die Frachtkosten gehen dagegen immer zu Lasten des Empfängers. Die Ware reist auf Gefahr
und Risiko des Auftraggebers, auch wenn frei Haus Verkauft vereinbart worden ist.
N.B.: Die Merkzeichen (Dx) rechts und (Sx) links betreffen eine rückwärtige Aussicht der Maschine oder Teile von ihr (siehe Bild). Ausnahmen werden gezeigt.
2
RESPUESTOS
Los pedidos han de efectuarse en nuestros consesionarios de zona y deben incluir siempre las
siguientes indicaciones:
- Tipo, modelo y número de matrícula del equipo. Dichos datos están impresos en la relativa
placa presente en el equipo.
- Número de código de la parte requerida presente en el catálogo respuestos.
- Descripcíon de la pieza y cantidad requerida.
- Numero de illustración.
- Medio de transporte. En caso que este ítem no esté especificado, el Fabricante, aún prestando la debidas consideraciones para este aspecto, no responde por eventuales retardos de
env’o debidos a causas de fuerza mayor.
Los gastos de transporte se consideran siempre a cargo del destinatario. La mercandería viaja
bajo riesgo y peligro del comprador, incluso cuando se vende franco destino.
N.B.: La refencia (Dx) derecha o (Sx) izquierda de la máquina o de sus componentes, se entiende, como en la figura, mirando la máquina por la parte trasera. Se indicarán las excepciones.
PIESE DE SCHIMB
Comandarea pieselor de schimb se va face prin intermediul concesionarilor din zonă şi trebuie
să fie întotdeauna însoţite de următoarele date:
- Tipul, modelul şi numărul de matricolă al utilajului. Aceste date se găsesc pe plăcuţa de
identificare a fiecărui utilaj.
- Numărul de cod al piesei de schimb cerute, care se găseşte în manual.
- Descrierea piesei de schimb şi cantitatea cerută.
- Numărul desenului în care se găseşte piesa.
- Mijloc de transport. În cazul în care acesta nu este specificat, Firma Constructoare poate avea
un regim special, nu răspunde de eventualele întârzieri de expediere datorate unor cauze de forţă
majoră.
Cheltuielile de transport sunt suportate de destinatar. Marfa este transportată pe riscul celui care
efectuează comanda, chiar dacă marfa este vândută în condiţii franco-destinatare.
NOTA: Termenul (Dx) Dreapta sau (Sx) Stânga a utilajului sau a părţilor acestuia, este privind
utilajul din partea posterioară. Excepţiile vor fi indicate.
cod. F07010546
Nr. Tav.
Descrizione
TAV. 01
TAV. 02
TAV. 03
TAV. CONT01
TAV. ELAN01
TAV. ELPOS01
TAV. ELREG01
TAV. ZAV01
TAV. LIV01
TAV. ASI01
TAV. GB01
TAV. PK01
TAV. FL01
TAV. GM01
Telaio base
Connessioni rullo
Kit luci standard
Disco di contenimento
Elemento anteriore D610
Elemento posteriore D610
Elemento regolabile D610
Kit zavorre
Barra livellatrice anteriore
Attacco seminatrice idraulico
Rullo gabbia
Rullo packer
Rullo flangiato
Rullo gommato
Nr. Tav.
Description
TAV. 01
TAV. 02
TAV. 03
TAV. CONT01
TAV. ELAN01
TAV. ELPOS01
TAV. ELREG01
TAV. ZAV01
TAV. LIV01
TAV. ASI01
TAV. GB01
TAV. PK01
TAV. FL01
TAV. GM01
Main Frame
Roller coonections
Lighting kit
Limiter disc
Front operators elements
Rear operator elements
Adjustable operator element
Ballast
Front leveling bar
Seed drill hitch
Cage roller
Packer roller
Light duty packer roller
Tyred roller
cod. F07010546
Pag.
6
8
10
12
14
16
18
20
22
24
26
28
32
34
Pag.
6
8
10
12
14
16
18
20
22
24
26
28
32
34
Nr. Tav.
Beschreibung
TAV. 01
TAV. 02
TAV. 03
TAV. CONT01
TAV. ELAN01
TAV. ELPOS01
TAV. ELREG01
TAV. ZAV01
TAV. LIV01
TAV. ASI01
TAV. GB01
TAV. PK01
TAV. FL01
TAV. GM01
Rahmen
Walze Verbindungen
Lichter kit
Begrenzer Scheibe
Elemente betreiber vor
Elemente betreiber nach
Eistallbare Elemente betreiber
Ballast
Vordere Planierstange
Anschluss für Saatmaschine
Stabwalze
Zahnpackerwalze
Krumenpackerwalze
Gummirolle
Nr. Tav.
Description
TAV. 01
TAV. 02
TAV. 03
TAV. CONT01
TAV. ELAN01
TAV. ELPOS01
TAV. ELREG01
TAV. ZAV01
TAV. LIV01
TAV. ASI01
TAV. GB01
TAV. PK01
TAV. FL01
TAV. GM01
Cadre de base
Connexions rouleau
Kit d’eclairage
Disc limiteur
Elements operateurs avant
Elements operateurs posterieure
Element operateur réglable
Kit masses de lestage
Barre niveleuse avant
Attelage du semoir
Rouleau à cage
Rouleau packer
Rouleau à flasques
Rouleau caoutchouté
Pag.
6
8
10
12
14
16
18
20
22
24
26
28
32
34
Pag.
6
8
10
12
14
16
18
20
22
24
26
28
32
34
3
Nr. Tav.
Descripcion
TAV. 01
TAV. 02
TAV. 03
TAV. CONT01
TAV. ELAN01
TAV. ELPOS01
TAV. ELREG01
TAV. ZAV01
TAV. LIV01
TAV. ASI01
TAV. GB01
TAV. PK01
TAV. FL01
TAV. GM01
4
Bastidor
Conexiones rodillo
Kit de iluminacion
Disco limitador
Elementos operadores delanteros
Elementos operadores traseros
Elemento operador adjustable
Kit lastres
Barra niveladora delantera
Enganche sembradora
Rodillo de jaula
Rodillo packer
Rodillo a flasques
Rodillo engomado
Pag.
6
8
10
12
14
16
18
20
22
24
26
28
32
34
Nr. Tav.
Descriere
Pag.
TAV. 01
TAV. 02
TAV. 03
TAV. CONT01
TAV. ELAN01
TAV. ELPOS01
TAV. ELREG01
TAV. ZAV01
TAV. LIV01
TAV. ASI01
TAV. GB01
TAV. PK01
TAV. FL01
TAV. GM01
Sasiu principal
Legatura rulou
Set lumini standard
Disc limitator
Element anterior D610
Element posterior D610
Element reglabil D610
Kit balast
Bara nivelatoare anterioara
Atasare hidraulica pentru semanatoare
Rulou colivie
Rulou packer
Rulou cu flansa
Rulou de cauciuc
6
8
10
12
14
16
18
20
22
24
26
28
32
34
cod. F07010546
cod. F07010546
5
TAV. 01
6
cod. F07010546
TAV. 01
TELAIO BASE / MAIN FRAME / RAHMEN / CADRE DE BASE / BASTIDOR / SASIU PRINCIPAL
Pos.
Cod.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
M65425101
M65430101
M65435101
M65440101
F20100134
F02200529
M65400166
F20100133
F20100142
F20110032
F01220059
M26400590
F20100139
F01220034
M65400138
F20100138
F01010264
F01010384
F01220093
F05150112
F01020436
Descrizione
Description
Description
Benennung
Descripcion
Descriere
TELAIO FISSO DISCHIERA PRESTO
TELAIO FISSO DISCHIERA PRESTO
TELAIO FISSO DISCHIERA PRESTO
TELAIO FISSO DISCHIERA PRESTO
PERNO D25 L190 C43
ZN
SPINA SCATTO D.11
ZN
SUPPORT LATERALE PIEGHEVOLE
PERNO D25 L122 C43
ZN
PERNO D36 L208 C43
ZN
VITE M14X1,5 X 40 SPEC 10.9 ZD
DADO M14X 1,5 D980 8 ZN
COMP.CASTELLO 3° PUNTO
PERNO D32 L135 C40
DADO M10X1,25 D980 8 ZN
ATTACCO BARRE
PERNO D28 L154 C43
VITE M10X1,25X70 U5740 8.8 BR
VITE M20X1,5X 60 U5740 8.8 ZN
DADO M20X 1,5 D980 8 ZN
MANIGLIA INTERAS. 117 FORO 8MM
VITE M 8X1,25X 20 U5739 8.8 ZN
PRESTO FRAME
PRESTO FRAME
PRESTO FRAME
PRESTO FRAME
PIN D25 L190 C43 ZN
SNAP PIN D.11
FOLDING SIDE SUPPORT
PIN D25 L122 C43 ZN
PIN D36 L208 C43 ZN
BOLT M14X1,5X40 10.9
NUT M14X 1,5 D980 8 ZB
COMPLETE 3RD POINT
PIN D32 L135 C40
NUT M10X1,25 D980 8 ZB
STIRRUP
PIN D28 L154 C43
BOLT M10X1,25X70 U5740 8.8 BR
BOLT M20X1,5X60
SELF LOCKING NUT M20X1,5 D980
HANDLE
SCREW M8X1,25X20 U5739 8.8 ZN
PRESTO CHASSIS
PRESTO CHASSIS
PRESTO CHASSIS
PRESTO CHASSIS
GOUJON D25 L190 C43 ZN
FICHE A DETENTE D.11
SUPPORT LATÉRAL PLIABLE
BOULON D25 L122 C43 ZN
GOUJON D36 L208 C43 ZN
VIS M 14X1,5X40
ECROU M14X 1,5 D980 8 ZB
3EME POINT COMPL.
BOULON D32 L135 C40
ECRO.M10X1,25 D980 8 ZB
ATTELAGE BARRE
BOULON D28 L154 C43
VIS M10X1,25X70 U5740 8.8 BR
VIS M20X1,5X60
ECROU AUTOBL. M20X1,5
POIGNEE
VIS M8X1,25X20 U5739 8.8 ZN
RAHMEN
RAHMEN
RAHMEN
RAHMEN
BOLZEN D25 L190 C43 ZN
EINRASTSTIFT D.11
KLAPPBARE HALTERUNG
BOLZEN D25 L122 C43 ZN
BOLZEN D36 L208 C43 ZN
SCHRAUBE M 14X1,5X40
MUTTER M14X 1,5 D980 8 ZB
3. PUNKT KOMPLETT
BOLZEN D32 L135 C40
MUTT.M10X1,25 D980 8 ZB
SCHUTZHOLM VERBINDUNG
BOLZEN D28 L154 C43
SCHRAUBE M10X1,25X70 U5740 8.8
SCHRAUBE M20X1,5X60
SELBSTSPERR.MUTTER M20X1,5
HANDGRIFF
SCHRA. M8X1,25X20 U5739 8.8 ZN
BASTIDOR PRESTO
BASTIDOR PRESTO
BASTIDOR PRESTO
BASTIDOR PRESTO
PERNO D25 L190 C43 ZN
CLAVIJA DE MUELLE D.11
BASTIDOR LATERAL PLEGABLE
PERNO D25 L122 C43 ZN
PERNO D36 L208 C43 ZN
TORNILLO M 14X1,5X40
TUERCA M14X 1,5 D980 8 ZB
TERCER PUNTO COMPL.
PERNO D32 L135 C40
TUER.M10X1,25 D980 8 ZB
ATAQUE BARRA
PERNO D28 L154 C43
TORNILLO M10X1,25X70 U5740 8.8
TORNILLO M20X1,5X60
TUERCA AUTOBL. M20X1,5
MANILLA
TORN. M8X1,25X20 U5739 8.8 ZN
CADRU
CADRU
CADRU
CADRU
BOLT D25 L190 C43 ZN
STIFT RESORT D.11
PLIEREA SIDE CADRU
BOLT D25 L122 C43 ZN
BOLT D36 L208 C43 ZN
SURUB TE.8G.M14X1,5X40 UNI 574
PIUL.M14X 1,5 D980 8 ZB
CAST. 3°PUNCT
BOLT D32 L135 C40
PIUL.M10X1,25 D980 8 ZB
OPRITOR BARE
BOLT D28 L154 C43
SURUB M10X1,25X70 U5740 8.8 BR
SURUB M20X1,5X60 5740 8.8 ZB
PIULITA AUTOBL.M20X1,5
MINER GAM MS 117 F.8MM
SURUB M8X1,25X20 U5739 8.8 ZN
cod. F07010546
7
TAV. 02
19
18
17
16
4
12
10
11
16
6
5
7
3
2
1
15
8
9
8
14
13
cod. F07010546
CONNESSIONI RULLO / ROLLER CONNECTIONS / WALZE VERBINDUNGEN / CONNEXIONS ROULEAU /
CONEXIONES RODILLO / LEGATURA RULOU
Pos.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Cod.
F01010171
R18020790
F04100058
M65400109
F01230269
F01010173
F20100090
M44400403
M44400401
M65400148
M23400529
M65400125
F01220070
F01410100
F01010341
F01220093
F01010190
F20100049
M44400404
TAV. 02
Descrizione
Description
Description
Benennung
Descripcion
Descriere
VITE M20X1,5X 75 U5738 8.8 ZN
BOCCOLA D.28X22 L.22
BOCCOLA MU 32X28X20
PIASTRA REG. PERNI
DADO M22X 1,5 D985 6S ZN
VITE M20X1,5 X 90 5738 8.8 ZN
PERNO D32 L64
ZN
STAFFA ATTACCO RULLO
STAFFA DX SUPPORTO RULLO
RASAMENTO
ROSETTA D=48,3 D=32,5 L=22
BRACCIO COLLEGAMENTO RULLO
DADO M16X 1,5 D980 8 ZN
ROS.M16 17X 30X 3 U6592 ZN
VITE M16X1,5 X45 U5740 8.8 ZN
DADO M20X 1,5 D980 8 ZN
VITE M22X1,5 X90 U5738 8.8 ZN
PERNO D22 L86 C43
ZN
STAFFA SX SUPPORTO RULLO
BOLT M20X1,5X75
BUSCHING D. 28X22
BUSHING MU 32X28X20
ADJUSTER PLATE
SELF LOCKING NUT M22X1,5
BOLT M 16X1,5X90
PIN D32 L64
ROLLER CONNECTION SUPPORT
RECHTE ROLLER CONNECT. SUPP.
SHIM
WASHER D=48,3 D=32,5 L=22
ROLLER CONNECTING ARM
NUT M16X 1,5 D980 8 ZB
WASHER M16 17X30X3 U6592 ZN
BOLT M16X1,5 X45 U5740 8.8 ZB
SELF LOCKING NUT M20X1,5 D980
BOLT M 22X1,5X90
BOLT D22 L86 C43 ZN
LEFT ROLLER CONNECTION SUPP.
VIS M20X1,5X75
BOITE D. 28X22
BOUCLE
PLAQUETTE DE REGISTRE
ECROU AUTOBL. M22X1,5
VIS M 16X1,5X90
GOUJON D32 L64
SUPPORT ROULEAU DROITE
SUPPORT ROULEAU RECHTE
CALE
ROSETTE D=48,3 D=32,5 L=22
BRAS DE CONNECTION ROULEAU
ECRO.M16X 1,5 D980 8 ZB
RONDELLE M16 17X30X3 U6592 ZN
VIS M16X1,5 X45 U5740 8.8 ZB
ECROU AUTOBL. M20X1,5
VIS M 22X1,5X90
GOUJON D.22
SUPPORT ROULEAU GAUCHE
SCHRAUBE M20X1,5X75
BSCHSE D. 28X22
BUECHSE
REGULIERUNGSPLATTE
SELBSTSPERR.MUTTER M22X1,5
SCHRAUBE M 16X1,5X90
STIFT D32 L64 ZN
SCHUTZHOLM WALZE
RECHTE SCHUTZHOLM WALZE
SHIM
SCHEIBE D=48,3 D=32,5 L=22
WALZE VERBINDUNGSARM
MUTT.M16X 1,5 D980 8 ZB
SCHEIBE M16 17X30X3 U6592 ZN
SCHR.M16X1,5 X45 U5740 8.8 ZB
SELBSTSPERR.MUTTER M20X1,5
SCHRAUBE M 22X1,5X90
BOLZEN D.22
LINKE SCHUTZHOLM WALZE
TORNILLO M20X1,5X75
CASQUILLO D. 28X22
CASQUILLO
PLAQUITA REGISTRO
DADO AUTOBL. M22X1,5
TORNILLO M 16X1,5X90
PERNO D32 L64
SOPORTE RODILLO DERECHA
SOPORTE RODILLO DERECHO
CALCE
ARANDELLA D=48,3 D=32,5 L=22
BRAZO DE CONEXIÓN RODILLO
TUER.M16X 1,5 D980 8 ZB
ARANDELA M16 17X30X3 U6592 ZN
TORN.M16X1,5 X45 U5740 8.8 ZB
TUERCA AUTOBL. M20X1,5
TORNILLO M 22X1,5X90
PERNO D.22
SOPORTE RODILLO IZQUIERDO
SURUB M20X1,5X75
BUCSA D. 28X22
BUCSA
PLACA REGLARE
PIULITA AUTOBLOCANTA M22X1,5
SURUB M20X1,5X90 5738 8.8 ZB
BOLT D32 L64 ZN
ANS. SUPORT RULOU DX
ANS. SUPORT RULOU DX
PANĂ DE FIXARE
ROZETA D=48,3 D=32,5 L=22
0
PIUL.M16X 1,5 D980 8 ZB
SAIBA M16 17X 30X 3 U6592 ZN
SUR. M16X1,5 X45 U5740 8.8 ZB
PIULITA AUTOBL.M20X1,5
SUR. M 22X1,5X90
BOLT D22 L86 C43 ZN
ANS. SUPORT RULOU SX
cod. F07010546
9
TAV. 03
10
cod. F07010546
KIT LUCI STANDARD / LIGHTING KIT / LICHTER KIT / KIT D’ECLAIRAGE / KIT DE ILUMINACION /
SET LUMINI STANDARD
Pos.
Cod.
1
2
3
4
5
6
7
M62100817
F01230085
F01220047
F20110800
R17640110
F01010050
F01410076
TAV. 03
Descrizione
Description
Description
Benennung
Descripcion
Descriere
SET INSTALATIE ELECTRICA
DADO M16X 2 D982 8 ZN
DADO M12X1,25 D980 8 ZN
CAV.Q.M16X 2X 40 118X135 ZB
PIASTRA SUPPORTO
VITE M12X1,25X35 U5738 8.8 ZN
RONDELLA D12 U6592 ZN
ELECTRIC KIT
NUT M16X 2 D982 8 ZN
NUT M12X1,25 D980 8 ZN
U BOLT M16X 2X 40 118X135 ZN
BLADE SUPPORT
SCREW M12X1,25X35 U5738 8.8 ZN
WASHER D12 U6592 ZN
EQUIPEMENT ELECTRIQUE
ECROU M16X 2 D982 8 ZN
ECROU M12X1,25 D980 8 ZN
ATTEL.M16X 2X 40 118X135 ZB
LAMA SUPPORT
VIS M12X1,25X35 U5738 8.8 ZN
RONDELLE D12 U6592 ZN
ELEKTRISCHES WERKZEUG
MUTTER M16X 2 D982 8 ZN
MUTTER M12X1,25 D980 8 ZN
VERBI.M16X 2X 40 118X135 ZB
MESSER HALTERUNG
SCHRA. M12X1,25X35 U5738 8.8ZN
SCHEIBE D12 U6592 ZN
ELEKTRISCHES WER
TUERCA M16X 2 D982 8 ZN
TUERCA M12X1,25 D980 8 ZN
PERNO M16X 2X 40 118X135 ZB
CUCHILLA SOPORTE
TORN. M12X1,25X35 U5738 8.8 ZN
ARANDELA D12 U6592 ZN
SET INSTALATIE ELECTRICA
PIULITA M16X 2 D982 8 ZN
PIULITA M12X1,25 D980 8 ZN
BRIDA “U” M16X 2X40 118X135 ZN
PLACA SUPORT
SURUB M12X1,25X35 U5738 8.8 ZN
SAIBA D12 U6592 ZN
cod. F07010546
11
TAV. CONT.01
12
cod. F07010546
DISCO DI CONTENIMENTO / LIMITER DISC / BEGRENZER SCHEIBE / DISC LIMITEUR / DISCO LIMITADOR /
DISC LIMITATOR
Pos.
Cod.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
F01200104
F01480145
F01230269
F01410135
M65400155
F05100202
F20100047
F01010343
F02200529
M65400152
F06160015
R18125110R
F01480123
F01010279
M65400153
TAV. CONT.01
Descrizione
Description
Description
Benennung
Descripcion
Descriere
DADO M16X 1,5 U5587 6S ZN
ROS.G 17X29 X 5 EX.C70 ZN
DADO M22X 1,5 D985 6S ZN
ROS.M22 23X 39X 3 U6592 ZN
PIASTRA DISCO DI CONTENIMENTO
TAPPO ALETTE
PERNO D22 L108 C43
ZN
VITE M16X 1,5X50 U5740 8.8 ZN
SPINA SCATTO D.11
ZN
STRUTT. DISCO CONT. POST
MOZZO SKF AGRI HUB BAA-0004
DISCO DI CONTENIMENTO
ROS.G 12,5X22,9X 4 EX.C70 ZN
VITE M12X1,25X20 U5740 8.8 ZN
STRUTT. DISCO CONTENIM. ANT.
NUT M16X 1,5 U5587 6S ZN
GROWER WASHER 17X29
SELF LOCKING NUT M22X1,5
WASHER M22 23X39X3 U6592 ZN
SIDE DISK PLATE
CAP
BOLT D22 L108 C43 ZN
SCREW M16X1.5X50 U5740 8.8 ZN
SNAP PIN D.11
REAR SIDE DISC SUPPORT
HUB
SIDE DISK
WASHER M12 ZGP EXTRA P.
SCREW M12X1,25X20 U5740 8.8 ZN
FRONT SIDE DISC SUPPORT
ECROU AUTOBL. M16X 1,5 U5587
RONDELLE GROWER 17X29
ECROU AUTOBL. M22X1,5
RONDELLE M22 23X39X3 U6592 ZN
PLAQUETTE DISQUE LATERALE
BOUCHON
GOUJON SUPPORT
VIS M16X1.5X50
FICHE A DETENTE D.11
SUPPORT DISQUE LAT. AVANTE
MOYEU
DISQUE LATERALE
RONDELLE M12 ZGP EXTRA P.
VIS M12X1,25X20 U5740 8.8 ZN
SUPPORT DISQUE LAT.ARRIERE
SELBSTSPERR.MUTTER M16X 1,5
SCHEIBE GROWER 17X29
SELBSTSPERR.MUTTER M22X1,5
SCHEIBE M22 23X39X3 U6592 ZN
SHEIBE SEITING PLATTE
DECKEL
BOLZEN
SCHRAUBE M16X1,5X50
EINRASTSTIFT D.11
VORD. SEITE SCHEIBE HALTERUNG
KEILNABE
SEITE SCHEIBE
UNTERLEGSCHEIBE M12 ZGP EXTRA
SCHRA.M12X1,25X20 U5740 8.8 ZN
HINT. SEITE SCHEIBE HALTERUNG
DADO AUTOBL. M16X 1,5 U5587
ARANDELA GROWER 17X29
DADO AUTOBL. M22X1,5
ARANDELA M22 23X39X3 U6592 ZN
PIASTRA DISCO LATERALE
TAPA
PERNO SOPORTE
TORNILLO M16X1,5X50
CLAVIJA DE MUELLE D.11
SUPP.DISCO LATERALE ANTER.
BUTUC
DISCO LATERALE
ARANDELA M12 ZGP EXTRA P.
TORN. M12X1,25X20 U5740 8.8 ZN
SUPP.DISCO LATERALE POST.
PIULITA M16X 1.5 U5587 6S ZN
SAIBA G. 17X29X5 EX.C70 ZN
PIULITA AUTOBLOCANTA M22X1,5
SAIBA M22 23X39X3 U6592 ZN
PLACA CONNEX.DISCO LIMITADOR
DOP
BOLT D22 L108 C43 ZN
SURUB M16X1,5X50 U5740 8.8 ZN
STIFT RESORT D.11
SOPORTE DISCO LIMITADOR ANT.
CUBO
DISCO LIMITATADOR
SAIBA M12 ZBP EXTRA P. ZB
SURUB M12X1,25X20 U5740 8.8 ZN
SOPORTE DISCO LIMITADOR POST.
cod. F07010546
13
TAV. ELAN.01
14
cod. F07010546
ELEMENTO ANTERIORE / FRONT OPERATOR ELEMENTS / ELEMENTE BETREIBER VOR / ELEMENTS OPERATEURS AVANT / ELEMENTOS OPERADORES DELANTEROS / ELEMENT ANTERIOR
Pos.
Cod.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
M65400208
M65400214
M65400213
M65400215
M65400217
M65400218
F01010279
F06160015
F01220070
F01480145
M65400221
F01410135
F01230269
M65400211
M65400216
F01010346
M65400228
F03240018
TAV. ELAN.01
Descrizione
Description
Description
Benennung
Descripcion
Descriere
DISCO D.460 BOMBATO 9 DENTI
DISCO D.510 BOMBATO 9 DENTI
DISCO D.460 BOMBATO LISCIO
DISCO D.510 BOMBATO LISCIO
DISCO D.460 BOMBATO 15 DENTI
DISCO D.510 BOMBATO 15 DENTI
VITE M12X1,25X20 U5740 8.8 ZN
MOZZO SKF AGRI HUB BAA-0004
DADO M16X 1,5 D980 8 ZN
ROS.G 17X29 X 5 EX.C70 ZN
SIPPORTO ELEM.OPER.ANTERIORE
ROS.M22 23X 39X 3 U6592 ZN
DADO M22X 1,5 D985 6S ZN
GOMMINO D.40 L.230
STAFFA ELEMENTO OPERATORE
VITE M16X1,5X 60 U5740 8.8 ZN
DISCO D=460 BOMBATO LOBATO
LOCTITE*243 1X250 ML.
DISK D.460
DISK D.510
DISK D.460
DISK D.510
DISK D.460
DISK D.510
SCREW M12X1,25X20 U5740 8.8 ZN
HUB
NUT M16X 1,5 D980 8 ZB
GROWER WASHER 17X29
FRONT OPER. ELEM. SUPPORT
WASHER M22 23X39X3 U6592 ZN
SELF LOCKING NUT M22X1,5
RUBBER
STIRRUP
BOLT M16X1,5X60
6 TEETH D.460 CROWN DISC
LOCTITE*243 1X250 ML.
DISQUE D.460
DISQUE D.510
DISQUE D.460
DISQUE D.510
DISQUE D.460
DISQUE D.510
VIS M12X1,25X20 U5740 8.8 ZN
MOYEU
ECRO.M16X 1,5 D980 8 ZB
RONDELLE GROWER 17X29
SUPPORT ELEM.OPERAT. AVANT
RONDELLE M22 23X39X3 U6592 ZN
ECROU AUTOBL. M22X1,5
CAOUTCHOUC
ETRIER
VIS M16X1,5X60
DISQUE D.460
LOCTITE*243 1X250 ML.
SCHEIBE D.460
SCHEIBE D.510
SCHEIBE D.460
SCHEIBE D.510
SCHEIBE D.460
SCHEIBE D.510
SCHRA.M12X1,25X20 U5740 8.8 ZN
KEILNABE
MUTT.M16X 1,5 D980 8 ZB
SCHEIBE GROWER 17X29
VORDERE SCHB.ELEMENT HALTER
SCHEIBE M22 23X39X3 U6592 ZN
SELBSTSPERR.MUTTER M22X1,5
GUMMI
BUEGEL
SCHRAUBE M16X1,5X60
SCHEIBE D.460
LOCTITE*243 1X250 ML.
DISCO D.460
DISCO D.510
DISCO D.460
DISCO D.510
DISCO D.460
DISCO D.510
TORN. M12X1,25X20 U5740 8.8 ZN
CUBO
TUER.M16X 1,5 D980 8 ZB
ARANDELA GROWER 17X29
SOPORTE EL. OPER. ANTERIOR
ARANDELA M22 23X39X3 U6592 ZN
DADO AUTOBL. M22X1,5
GOMA
ESTRIBO
TORNILLO M16X1,5X60
DISCO D.460
LOCTITE*243 1X250 ML.
DISC D.460
DISC D.510
DISC D.460
DISC D.510
DISC D.460
DISC D.510
SURUB M12X1,25X20 U5740 8.8 ZN
BUTUC
PIUL.M16X 1,5 D980 8 ZB
SAIBA G. 17X29X5 EX.C70 ZN
SUPORT ELEMENT OPER. ANTER.
SAIBA M22 23X39X3 U6592 ZN
PIULITA AUTOBLOCANTA M22X1,5
0
BRIDA SUPORT EL. OPERATOR
SURUB M16X1,5X60 5740 8.8 ZB
DISC D.460
LOCTITE*243 1X250 ML.
cod. F07010546
15
TAV. ELPOS.01
16
cod. F07010546
ELEMENTO POSTERIORE D610 / REAR OPERATOR ELEMENTS / ELEMENTE BETREIBER NACH / ELEMENTS
OPERATEURS POSTERIEURE / ELEMENTOS OPERADORES TRASEROS / ELEMENT POSTERIOR D610
Pos.
Cod.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
F01010279
M65400208
M65400214
M65400213
M65400215
M65400217
M65400218
F06160015
F01480145
F01220070
M65400209
F01410135
F01230269
M65400211
M65400216
F01010346
F03240018
TAV. ELPOS.01
Descrizione
Description
Description
Benennung
Descripcion
Descriere
VITE M12X1,25X20 U5740 8.8 ZN
DISCO D.460 BOMBATO 9 DENTI
DISCO D.510 BOMBATO 9 DENTI
DISCO D.460 BOMBATO LISCIO
DISCO D.510 BOMBATO LISCIO
DISCO D.460 BOMBATO 15 DENTI
DISCO D.510 BOMBATO 15 DENTI
MOZZO SKF AGRI HUB BAA-0004
ROS.G 17X29 X 5 EX.C70 ZN
DADO M16X 1,5 D980 8 ZN
SIPPORTO ELEM.OPER.POST
ROS.M22 23X 39X 3 U6592 ZN
DADO M22X 1,5 D985 6S ZN
GOMMINO D.40 L.230
STAFFA ELEMENTO OPERATORE
VITE M16X1,5X 60 U5740 8.8 ZN
LOCTITE*243 1X250 ML.
SCREW M12X1,25X20 U5740 8.8 ZN
DISK D.460
DISK D.510
DISK D.460
DISK D.510
DISK D.460
DISK D.510
HUB
GROWER WASHER 17X29
NUT M16X 1,5 D980 8 ZB
REAR OPER. ELEM. SUPPORT
WASHER M22 23X39X3 U6592 ZN
SELF LOCKING NUT M22X1,5
RUBBER
STIRRUP
BOLT M16X1,5X60
LOCTITE*243 1X250 ML.
VIS M12X1,25X20 U5740 8.8 ZN
DISQUE D.460
DISQUE D.510
DISQUE D.460
DISQUE D.510
DISQUE D.460
DISQUE D.510
MOYEU
RONDELLE GROWER 17X29
ECRO.M16X 1,5 D980 8 ZB
SUPPORT ELEM.OPERAT. ARRIERE
RONDELLE M22 23X39X3 U6592 ZN
ECROU AUTOBL. M22X1,5
CAOUTCHOUC
ETRIER
VIS M16X1,5X60
LOCTITE*243 1X250 ML.
SCHRA.M12X1,25X20 U5740 8.8 ZN
SCHEIBE D.460
SCHEIBE D.510
SCHEIBE D.460
SCHEIBE D.510
SCHEIBE D.460
SCHEIBE D.510
KEILNABE
SCHEIBE GROWER 17X29
MUTT.M16X 1,5 D980 8 ZB
HINTERE SCHB.ELEMENT HALTER
SCHEIBE M22 23X39X3 U6592 ZN
SELBSTSPERR.MUTTER M22X1,5
GUMMI
BUEGEL
SCHRAUBE M16X1,5X60
LOCTITE*243 1X250 ML.
TORN. M12X1,25X20 U5740 8.8 ZN
DISCO D.460
DISCO D.510
DISCO D.460
DISCO D.510
DISCO D.460
DISCO D.510
CUBO
ARANDELA GROWER 17X29
TUER.M16X 1,5 D980 8 ZB
SOPORTE EL. OPER. POSTERIOR
ARANDELA M22 23X39X3 U6592 ZN
DADO AUTOBL. M22X1,5
GOMA
ESTRIBO
TORNILLO M16X1,5X60
LOCTITE*243 1X250 ML.
SURUB M12X1,25X20 U5740 8.8 ZN
DISC D.460
DISC D.510
DISC D.460
DISC D.510
DISC D.460
DISC D.510
BUTUC
SAIBA G. 17X29X5 EX.C70 ZN
PIUL.M16X 1,5 D980 8 ZB
SUPORT ELEMENT OPER. POST..
SAIBA M22 23X39X3 U6592 ZN
PIULITA AUTOBLOCANTA M22X1,5
0
BRIDA SUPORT EL. OPERATOR
SURUB M16X1,5X60 5740 8.8 ZB
LOCTITE*243 1X250 ML.
cod. F07010546
17
TAV. ELREG.01
18
cod. F07010546
ELEMENTO REGOLABILE D610 / ADJUSTABLE OPERATOR ELEMENTS / EISTALLBARE ELEMENTE BETREIBER /
ELEMENTS OPERATEURS RÉGLABLE / ELEMENTO OPERADOR ADJUSTABLE / ELEMENT REGLABIL D610
Pos.
Cod.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
M65400208
M65400214
M65400213
M65400215
M65400217
M65400218
F01010279
F01010114
F06160015
M65400227
F01410135
F01230269
F01220070
F01480145
M65400225
M65400211
M65400216
F01010346
F03240018
TAV. ELREG.01
Descrizione
Description
Description
Benennung
Descripcion
Descriere
DISCO D.460 BOMBATO 9 DENTI
DISCO D.510 BOMBATO 9 DENTI
DISCO D.460 BOMBATO LISCIO
DISCO D.510 BOMBATO LISCIO
DISCO D.460 BOMBATO 15 DENTI
DISCO D.510 BOMBATO 15 DENTI
VITE M12X1,25X20 U5740 8.8 ZN
VITE M16X 1,5X50 U5738 8.8 ZN
MOZZO SKF AGRI HUB BAA-0004
GAMBA INFER.ELEM.LATER.POST.
ROS.M22 23X 39X 3 U6592 ZN
DADO M22X 1,5 D985 6S ZN
DADO M16X 1,5 D980 8 ZN
ROS.G 17X29 X 5 EX.C70 ZN
STRUTT.ELEM.OPER.LATER. POST
GOMMINO D.40 L.230
STAFFA ELEMENTO OPERATORE
VITE M16X1,5X 60 U5740 8.8 ZN
LOCTITE*243 1X250 ML.
DISK D.460
DISK D.510
DISK D.460
DISK D.510
DISK D.460
DISK D.510
SCREW M12X1,25X20 U5740 8.8 ZN
SCREW M16X1,5X50 U5738 8.8 ZN
HUB
SIDE OPERAT. ELEM. LOWER SUPP.
WASHER M22 23X39X3 U6592 ZN
SELF LOCKING NUT M22X1,5
NUT M16X 1,5 D980 8 ZB
GROWER WASHER 17X29
REAR SIDE OPERAT. ELEM SUPP.
RUBBER
STIRRUP
BOLT M16X1,5X60
LOCTITE*243 1X250 ML.
DISQUE D.460
DISQUE D.510
DISQUE D.460
DISQUE D.510
DISQUE D.460
DISQUE D.510
VIS M12X1,25X20 U5740 8.8 ZN
VIS M 16X1,5X50
MOYEU
SUPPORT INFERIEUR EL.OPER.LAT.
RONDELLE M22 23X39X3 U6592 ZN
ECROU AUTOBL. M22X1,5
ECRO.M16X 1,5 D980 8 ZB
RONDELLE GROWER 17X29
SUPP. ELEMENT OPER.LAT. ARRIERE
CAOUTCHOUC
ETRIER
VIS M16X1,5X60
LOCTITE*243 1X250 ML.
SCHEIBE D.460
SCHEIBE D.510
SCHEIBE D.460
SCHEIBE D.510
SCHEIBE D.460
SCHEIBE D.510
SCHRA.M12X1,25X20 U5740 8.8 ZN
SCHRAUBE M 16X1,5X50
KEILNABE
UNTERE HALTERUNG
SCHEIBE M22 23X39X3 U6592 ZN
SELBSTSPERR.MUTTER M22X1,5
MUTT.M16X 1,5 D980 8 ZB
SCHEIBE GROWER 17X29
HINTERE SEITE HALTERUNG
GUMMI
BUEGEL
SCHRAUBE M16X1,5X60
LOCTITE*243 1X250 ML.
DISCO D.460
DISCO D.510
DISCO D.460
DISCO D.510
DISCO D.460
DISCO D.510
TORN. M12X1,25X20 U5740 8.8 ZN
TORNILLO M 16X1,5X50
CUBO
SOPORTE INFERIOR EL.OPER.LAT.
ARANDELA M22 23X39X3 U6592 ZN
DADO AUTOBL. M22X1,5
TUER.M16X 1,5 D980 8 ZB
ARANDELA GROWER 17X29
SOPORTE EL.OPER.POST.LAT.
GOMA
ESTRIBO
TORNILLO M16X1,5X60
LOCTITE*243 1X250 ML.
DISC D.460
DISC D.510
DISC D.460
DISC D.510
DISC D.460
DISC D.510
SURUB M12X1,25X20 U5740 8.8 ZN
SURUB M16X1,5X50 U5738 8.8 ZN
BUTUC
PICIOR INFER.ELEM.LATER.POST
SAIBA M22 23X39X3 U6592 ZN
PIULITA AUTOBLOCANTA M22X1,5
PIUL.M16X 1,5 D980 8 ZB
SAIBA G. 17X29X5 EX.C70 ZN
SUPPORTO ELEM.LATER.POST
0
BRIDA SUPORT EL. OPERATOR
SURUB M16X1,5X60 5740 8.8 ZB
LOCTITE*243 1X250 ML.
cod. F07010546
19
TAV. ZAV.01
20
cod. F07010546
KIT ZAVORRE / BALLAST / BALLAST / KIT MASSES DE LESTAGE / KIT LASTRES / KIT BALAST
Pos.
Cod.
1
2
3
4
5
6
7
8
F01020333
F01220266
G17312090
M65400305
F01020328
F01020280
M65400303
F01220092
TAV. ZAV.01
Descrizione
Description
Description
Benennung
Descripcion
Descriere
VITE M20X2,5X280 U5737 8.8 ZN
DADO M16X 2 D980 8 ZN
SCONTRO A U SP.8 2F17 157
PIEGATO ANCORAGGIO ZAVORRE
VITE M20X2,5X250 U5737 10.9 ZD
VITE M16X2X200 U5737 10.9 ZN
ZAVORRA VERTICALE 25KG
DADO M20X 2,5 D980 8 ZN
SCREW M20X2,5X280 U5737 8.8 ZN
NUT M16X 2 D980 8 ZN
STRIKER
SUPPORT
BOLT 20 X250 5737 10.9 GALVANI
SCREW M16X2X200 U5737 10.9 ZN
BALLAST
NUT M20X 2,5 D980 8 ZN
VIS M20X2,5X280 U5737 8.8 ZN
ECROU M16X 2 D980 8 ZN
BRIDE
SUPPORT
VIS 20 X250 5737 10.9 ZN
VIS M16X2X200 U5737 10.9 ZN
LEST
ECROU M20X 2,5 D980 8 ZN
SCHR. M20X2,5X280 U5737 8.8 ZN
MUTTER M16X 2 D980 8 ZN
ANSCHLAG
HALTER
SCHRAUBE 20 X250 5737 10.9 ZN
SCHRA. M16X2X200 U5737 10.9 ZN
BALLAST
MUTTER M20X 2,5 D980 8 ZN
TORN. M20X2,5X280 U5737 8.8 ZN
TUERCA M16X 2 D980 8 ZN
ELEMENTO DE EMPALME
SOPORTE
TORNILLO 20 X250 5737 10.9 ZN
TORN. M16X2X200 U5737 10.9 ZN
CONTRAPESO
TUERCA M20X 2,5 D980 8 ZN
SURUB M20X2,5X280 U5737 8.8 ZN
PIULITA M16X 2 D980 8 ZN
CONTRA A U
RABATARE
SUR. M20X250 U5737 10.9 ZB
SURUB M16X2X200 U5737 10.9 ZN
0
PIULITA M20X 2,5 D980 8 ZN
cod. F07010546
21
TAV. LIV.01
22
cod. F07010546
BARRA LIVELLATRICE ANTERIORE / FRONT LEVELING BAR / VORDERE PLANIERSTANGE / BARRE NIVELEUSE
AVANT / BARRA NIVELADORA DELANTERA / BARA NIVELATOARE ANTERIOARA
Pos.
Cod.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
M65425705
M65430705
M65435705
M65440705
F20120349
F01220034
F20100011
G17911750
F20110715
F02200485
M65400701
F01010384
F01220093
F01010298
G67002042
F20120336
F01220047
F20122205
F01060206
F01200293
TAV. LIV.01
Descrizione
Description
Description
Benennung
Descripcion
Descriere
TUBO QUADRO B=50 S=5 L=2460
TUBO QUADRO B=50 S=5 L=2940
TUBO QUADRO B=50 S=5 L=3460
TUBO QUADRO B=50 S=5 L=3960
TAPPO ALETTE
DADO M10X1,25 D980 8 ZB
PERN.INF.MART.REG.PROF.
MANIGLIA
CAV.Q.M10X 1,5X 30 61X 80 ZN
SPINA SCATTO D.6 SPEC. ZG
COMPOSTO SOSTEGNO BARRA
VITE M20X1,5X 60 U5740 8.8 ZG
DADO M20X 1,5 D980 8 ZN
VIT.M12X1,25X 80 U5740 8.8 ZN
STAFFA 70X8
MOLLA LIVELLATRICE S.VOMERE
DADO M12X1,25 D980 8 ZN
PALETTA STRETTA MOLLA LIV.
VITE M12X1,75X30 U5731* 8.8 ZN
DADO M12X1,75 U5588 6.8 ZN
FRONT TUBE L=2460
FRONT TUBE L=2940
FRONT TUBE L=3460
FRONT TUBE L=3960
CAP
NUT M10X1,25 D980 8 ZB
PIN
HANDLE
STRIKER M10X 1,5X 30 61X 80 ZB
SNAP PIN D.6 ZN
FRONT TUBE SUPPORT
BOLT M20X1,5X60
SELF LOCKING NUT M20X1,5
BOLT M12X1,25X80 U5740 8.8 ZN
BRACKET 70X8
LEVELLER SPRING COULTER
NUT M12X1,25 D980 8 ZN
LEVELLER SPRING OPENER TIP
BOLT M12X1,75X30
NUT M12X1,75 U5588 6.8 ZN
TUBE ANTERIEUR L=2460
TUBE ANTERIEUR L=2940
TUBE ANTERIEUR L=3460
TUBE ANTERIEUR L=3960
BOUCHON
ECRO.M10X1,25 D980 8 ZB
GOUJON
POIGNEE
BUTEE M10X 1,5X 30 61X 80 ZB
GOUPILLE D.6
SUPPORT TUBE ANTERIEUR
VIS M20X1,5X60
ECROU AUTOBL. M20X1,5
VIS M12X1,25X80 U5740 8.8 ZN
BRIDE 70X8
RESSORT NIVELEUR
ECROU M12X1,25 D980 8 ZN
POINTE RESSORT NIVELEUR
VIS M12X1,75X30
ECROU M12X1,75 U5588 6.8 ZN
VORDERROHR L=2460
VORDERROHR L=2940
VORDERROHR L=3460
VORDERROHR L=3960
DECKEL
MUTT.M10X1,25 D980 8 ZB
BOLZEN
HANDGRIFF
ANSCHLAG M10X 1,5X 30 61X 80
SPLINT D.6
VORDERROHR HALTERUNG
SCHRAUBE M20X1,5X60
SELBSTSPERR.MUTTER M20X1,5
SCHR.M12X1,25X 80 U5740 8.8 ZN
BsGEL 70X8
FEDER NIVELLIEREINHEIT
MUTTER M12X1,25 D980 8 ZN
FED. NIVELLIEREINHEIT SPITZE
SCHRAUBE M12X1,75X30
MUTTER M12X1,75 U5588 6.8 ZN
TUBO ANTERIOR L=2460
TUBO ANTERIOR L=2940
TUBO ANTERIOR L=3460
TUBO ANTERIOR L=3960
CORCHO
TUER.M10X1,25 D980 8 ZB
PERNO
MANILLA
EL. DE EMPALME M10X 1,5X 30
RODETE D.6
SOPORTE TUBO ANTERIOR
TORNILLO M20X1,5X60
TUERCA AUTOBL. M20X1,5
TORN.M12X1,25X 80 U5740 8.8 Z
ABRAZADERA 70X8
MUELLE NIVELADORA
TUERCA M12X1,25 D980 8 ZN
PUNTA MUELLE NIVELADORA
TORNILLO M12X1,75X30
TUERCA M12X1,75 U5588 6.8 ZN
0
0
0
0
DOP
PIUL.M10X1,25 D980 8 ZB
PIVOT INFERIOR REGLARE
MINER
BRIDA “U” M10X1,5X30 61X 80ZN
STIFT RESORT D.6 SPEC. ZN
0
SURUB M20X1,5X60 5740 8.8 ZB
PIULITA AUTOBL.M20X1,5
SUR.M12X1,25X 80 U5740 8.8 BR
SUPORT 70X8
ARC NIVELATOR FARA BRAZDAR
PIULITA M12X1,25 D980 8 ZN
#N/D
0
PIULITA M12X1,75 U5588 6.8 ZN
cod. F07010546
23
Tav. ASI
ATTACCO SEMINATRICE IDRAULICO
SEED DRILL HITCH
ANSCHLUSS FÜR SAATMASCHINE
ATTELAGE DU SEMOIR
ENGANCHE SEMBRADORA
ATASARE HIDRAULICA PENTRU SEMANATOARE
33
31
30
32
28
34
1
5
24
15
23
17
24
21 20
29
17
6
25
17
29
18
28 19
6
18 19
21 22
17
15
37 38 36
47 49
48
50
9
17 47
16
39
15
20
*
13
41
46
35
27
5
2
1
48 49 50 17
17
14
12
15
11
10
4
7 6
8
3
41
46
17
2
51
24
1
4
5
6 7
*
INSERIRE PERNO SOLO IN FASE DI TRASPORTO
INSERT PIN ONLY FOR TRANSPORT PHASE
INTRODUIRE LE PIVOT SEULEMENT POUR LE TRANSPORT
STECKEN SIE DEN BOLZEN NUR FÜR DEN TRANSPORT EIN
INTRODUCIR EL PERNO SOLO PARA EL TRANSPORTE
cod. F07010546
Tav. ASI
Pos.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
27
28
29
30
31
32
33
34
35
36
37
38
39
41
46
47
48
49
50
51
Cod.
F01010250
M36200989
M72100801
M36200944
F01220034
F01220093
M27100644
F20110790
M47400226
F01200110
F01480145
M36200941
F01220070
F20100062
F02200529
F05150011
F01100048
F01010173
M36200982
F02200374
M47400214
M47400806
M47400805
F01470033
M47400200
F20300001
F20100062
M36200986
M47400400
M47400803
F01010082
F01220059
M36200987
M66100802
F03050229
M58100890
F03150879
F05150069
M66100803
M36200305
M47400225
F03150266
F01500012
F03150498
F03100165
cod. F07010546
Descrizione
Description
Description
Benennung
VITE M10X1,25X30 U5740 8.8 ZN
COMP. PERNO STELO MART.
COMP.BRACCIO INFERIORE A.S.I.
DISTANZIALE D=38 D=30 L=9
DADO M10X1,25 D980 8 ZN
DADO M20X 1,5 D980 8 ZN
RONDELLA Z.P.G.
CAVALLOTTO M16X115 INT.80 ZN
KIT ETICHETTE SICUREZZA X ASI
DADO M16X 2 U5587 6.8 ZN
ROS.G 17X29 X 5 EX.C70 ZN
COMP. BLOCCO SUPERIORE
DADO M16X 1,5 D980 8 ZN
PERNO 25X128
ZN
SPINA SCATTO D.11
ZN
PUFFER PARACOLPI ART.741278
ING.M 8X1,25 7663A 9SMNPB28 ZN
VITE M20X1,5 X 90 5738 8.8 ZN
PIATTO RINFORZO FORI
COPIGLIA R 4X 82
ZN
FERMO GANCIO
ZN
GANCIO SX ATTACCO SEMINATRICE
GANCIO DX ATTACCO SEMINATRICE
ROS.T 30,5X 58X 2,8
ZN
COMP. TELAIO SUPERIORE 3°P.
MART*M.L= 350 L= 286 D=25,5 ZN
SPINA GASPARDO 25X128
ZN
PERNO SNODI
BRACCIO SUPERIORE
COMP.ATTACCO BRACCIO SUP
VITE M14X1,5 X50 U5738 8.8 ZN
DADO M14X 1,5 D980 8 ZN
PERNO SNODI A.S.I.
KIT MONTAGGIO TUBI ID.A.S.I.B2
TR 2SN 1/4" FD1/4 F901/4 1200
PREMONT.TUB.IDR.MART.LAT. GUA
ADATT. A T DA 1/4
FASCETTA NERA
PERNO Z=25 L=245
ZN
DISTANZIALE ZN
MARTINETTO IDRAULICO
NIPPLO MM CIL-CIL 1/4-1/4 ZN
RONDELLA IN RAME 1/4"
VALVOLA DI BLOCCO AUTOMAT.ZN
KIT GUAR.MAR.72100814 A.S.I.G2
BOLT M10X1,25X30 U5740 8.8 ZB
PIN
LOWER ARM
SPACER
NUT M10X1,25 D980 8 ZB
SELF LOCKING NUT M20X1,5 D980
WASHER
STIRRUP
SECURITY LABELS
NUT M16
GROWER WASHER D.16
UPPER LOCK
NUT M16X 1,5 D980 8 ZB
3RD POINT PIN
SNAP PIN D.11
RUBBER BUFFER
SPHERE NIPPLE M8X 1,25 A
BOLT M 16X1,5X90
REINFORCEMENT
SPLIT PIN 4X82
HOOK STOPPER
LEFT HOOK SEEDDRILL
RIGHT HOOK SEEDDRILL
SPRING WASHER D.30,5
UPPER FRAME
3RD POINT STRETCHER
3RD POINT PIN
PIN
UPPER ARM
STIRRUP LINKAGE
BOLT M 14X1,5X50
NUT M14X 1,5 D980 8 ZB
PIN
COMPLETE HYDRAULIC TUBE
HYDRAULIC TUBE L.1200
HYDRAULIC TUBE
T CONNECTION 1/4"
BLACK BAND
PIN
SPACER
HYDRAULIC CYLINDER
NIPPLE GALV.CYL.MALE 1/4 ZN
WASHER 14
AUTOMATIC LOCKING VALVE
GASKET SETS
VIS M10X1,25X30 U5740 8.8 ZB
GOUJON
BRAS INFERIEURE
ENTRETOISE
ECRO.M10X1,25 D980 8 ZB
ECROU AUTOBL. M20X1,5
RONDELLE
BRIDE T=80 M=16X1,5 L=115
ETIQUETTES DE SECURITE
ECROU M16
RONDELLE GROWER D.16
BLOC SUPERIEURE
ECRO.M16X 1,5 D980 8 ZB
GOUJON 3EME POINT
FICHE A DETENTE D.11
BUFFER CAOUTCHOUC
GRAISSEUR A BILLES M8 X 1-25 A
VIS M 16X1,5X90
RENFORCEMENT
GOUPILLE 4X82
BLOCAGE DU CROCHET
CROCHET GAUCHE ATT.SEM.
CROCHET DROIT ATT.SEM.
RESSORT A DISQUES D.30,5
CHASSIS 3' P.
TENDEUR 3EME POINT
GOUJON 3EME POINT
PIVOT
BRAS SUPERIEURE
ATTELAGE ETRIER
VIS M 14X1,5X50
ECROU M14X 1,5 D980 8 ZB
GOUJON
TUBE HYDRAULIQUE COMPLET
TUBE HYDRAUL. L.1200
TUBE HYDRAUL.
CONNECTION A T 1/4"
BANDE NOIR
GOUJON
ENTRETOISE
CILINDRE HYDRAULIQUE
NIPPLE MALE CYL. 1/4 ZN
RONDELLE CUIVRE D. 14
SOUPAPE D'ARRET AUTOMATIQUE
SERIE JOINTS
SCHR.M10X1,25X30 U5740 8.8 ZB
BOLZEN
UNTERE STANGE
DISTANZSTUECK
MUTT.M10X1,25 D980 8 ZB
SELBSTSPERR.MUTTER M20X1,5
SCHEIBE
ANSCHLUSS
SICHERUNG AUFKLEBER
MUTTER M16
SCHEIBE GROWER D.16
OBERE ENDMASS
MUTT.M16X 1,5 D980 8 ZB
BOLZEN 3. PUNKT
EINRASTSTIFT D.11
PUFFER
KUGELFETTBsCHSE M8 X 1-25 A
SCHRAUBE M 16X1,5X90
VERSTAERKUNG
SPLINT 4X82
HAKEN HALTERUNG
LINKS HACKEN ANBAUTEIL
RECHTS HACKEN ANBAUTEIL
FEDER D.30,5
OBERER RAHMEN 3' P.
3.PUNKT ZUGSTANGE
BOLZEN 3. PUNKT
BOLZEN
OBERE STANGE
BUEGELLINK
SCHRAUBE M 14X1,5X50
MUTTER M14X 1,5 D980 8 ZB
BOLZEN
KOMPL.HYDR. SCHLAUCH
HYDRAUL. ROHR L.1200
HYDRAUL. ROHR
T VERBINDUNG 1/4"
SCHWARZE BAND
STIFT
DISTANZSTUECK
HYDR. ZYLINDER
NIPPELZYL.1/4 ZN
KUPFERSCHEIBE 14
AUTOM. VENTIL
DICHTUNGSSATZ
Descripcion
TORN.M10X1,25X30 U5740 8.8 ZB
PERNO
BRAZO INFEROR
DISTANCIADOR
TUER.M10X1,25 D980 8 ZB
TUERCA AUTOBL. M20X1,5
ARANDELA
ATAQUE
CALCOMANIA DE PELIGRO
TUERCA M16
ARANDELA GROWER D.16
BLOQUE SUP.
TUER.M16X 1,5 D980 8 ZB
PERNO 3 PUNTO
CLAVIJA DE MUELLE D.11
PUFFER
ENGRAS. DE ESFERAS M8 X 1-25 A
TORNILLO M 16X1,5X90
REFUERZO
PASADOR 4X82
CIERRE GANCIO
GANCIO IZQUIERDO ENG.SEM.
GANCIO DERECHO ENG.SEM.
MUELLE DISCO D.30,5
CHASSIS SUP.
TENSOR TERCER PUNTO
PERNO 3 PUNTO
PERNO
BRAZO SUP.
ESTRIBO ATAQUE
TORNILLO M 14X1,5X50
TUERCA M14X 1,5 D980 8 ZB
PERNO
TUBO IDRAULICO COMPLETO
TUBO HYDRAULICO L.1200
TUBO HYDRAULICO
JUNTURA A T 1/4"
CINTA
PERNO
DISTANCIADOR
PISTON HYDRAULICO
NIPLE MACHO CIL.1/4 ZN
ARANDELA 14
VALVULA DE CRIERRE AUTOMATICA
SERIE JUNTAS
25
Tav. GB01
26
cod. F07010546
Tav. GB01
Pos.
Cod.
Descrizione
Description
Description
Benennung
Descripcion
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
M43400700
M43400701
F01010283
F01010288
F01480123
F01010291
M43400467
F01010341
F01220070
M43418457
M43420457
M43423457
M43425457
M43430457
M43435457
M43440457
M43445457
F05100019
M23418714
M23420714
M23423714
M23425714
M23430714
M23435714
M23440714
M23445714
M43425474
M43430474
M43435474
M43440474
M43445474
F02100142
M43418473
M43420473
M43423473
M43425473
M43430473
M43435473
M43440473
M43445473
F01100011
M43400704
M23400439
F02050168
M48000307
F04010184
M38100990
M23400438
M43400707
F01220047
F01010281
M43400705
M23400436
F02010034
F04010225
M61100441
M23400435
M43400468
FIANCATA RULLO PICCOLA
FIANCATA RULLO GRANDE
VITE M12X1,25X30 U5740 8.8 ZN
VITE M12X1,25X35 U5740 8.8 ZN
ROS.G 12,5X22,9X 4 EX.C70 ZN
VITE M12X1,25X40 U5740 8.8 ZN
COMP.SUPP.CUSC.OSCIL.H42 X RIC
VITE M16X1,5 X45 U5740 8.8 ZN
DADO M16X 1,5 D980 8 ZN
TRAVE ANTERIORE RULLO 1500C
TRAVE ANTERIORE RULLO 2000A
TRAVE ANTERIORE RULLO 2000C
TRAVE ANTERIORE RULLO 2500A
TRAVE ANTERIORE RULLO 3000A
TRAVE ANTERIORE RULLO 3500A
TRAVE ANTERIORE RULLO 4000A
TRAVE ANTERIORE RULLO 4500A
TAPPO AD ALETTA D. 34 PLT
ROTORE*RULLO GB.550 1500C
ROTORE*RULLO GB.550 2000A
ROTORE*RULLO GB.550 2000C
ROTORE*RULLO GB.550 2500A
ROTORE*RULLO GB.550 3000A
ROTORE*RULLO GB.550 3500A
ROTORE*RULLO GB.550 4000A
ROTORE*RULLO GB.550 4500A
TUBO D=30 S=2,8
2500A
TUBO D=30 S=2,8
3000A
TUBO D=30 S=2,8
3500A
TUBO D=30 S=2,8
4000A
TUBO D=30 S=2,8
4500A
SPINA E.P. 8X 40 U6873 C70 BR
ROTORE RULLO GB 450 1500C
ROTORE RULLO GB 450 2000A
ROTORE RULLO GB 450 2000C
ROTORE RULLO GB 450 2500A
ROTORE RULLO GB 450 3000A
ROTORE RULLO GB 450 3500A
ROTORE RULLO GB 450 4000A
ROTORE RULLO GB 450 4500A
ING.M 6X1 7663-A 9SMNPB28 ZN
GUARNIZIONE METALLICA H42
FLANGIA SUPP. RULLO OSC. H. 42
ANELLO E. DE 40X1,75 U7435 C70
ANELLO RINF.40X50X1,5 C70 TEMP
CUSC.D40 D80 BOMB.18 6208 2RS1
GUARNIZIONE ELASTICA
MOZZO CUSCINETTO OSCILLANTE
FLANGIA SPESSORE
DADO M12X1,25 D980 8 ZN
VITE M12X1,25X25 U5740 8.8 ZN
GUARNIZIONE METALLICA H60
FLANGIA ESTERNA SUP.CUSC.OSC.
GHIERA AU.GUK M40X1,5 T.4H ZN
CUSC.D45 D100 B25 1726309-2RS1
ANELLO T. 52X 90X 6 SPEC.
MOZZO CUSCINETTO OSCILL.H60
COMP.SUPP.CUSC.OSCIL.H60 X RIC
ROLLER SIDE PANEL SMALL
ROLLER SIDE PANEL BIG
BOLT M 12X1,25X30
SCREW M12X1,25X35 U5740 8.8 ZN
WASHER M12 ZGP EXTRA P.
SCREW M12X1,25X40 U5740 8.8 ZN
COMPLETE BEARING SUPPORT H42
BOLT M16X1,5 X45 U5740 8.8 ZB
NUT M16X 1,5 D980 8 ZB
BEAM 1500C
BEAM 2000A
BEAM 2000C
BEAM 2500A
BEAM 3000A
BEAM 3500A
BEAM 4000A
BEAM 4500A
PLUG D.34
CAGE ROLLER ROTOR GB.550 1500C
CAGE ROLLER ROTOR GB.550 2000A
CAGE ROLLER ROTOR GB.550 2000C
CAGE ROLLER ROTOR GB.550 2500A
CAGE ROLLER ROTOR GB.550 3000A
CAGE ROLLER ROTOR GB.550 3500A
CAGE ROLLER ROTOR GB.550 4000A
CAGE ROLLER ROTOR GB.550 4500A
PIPE D=30 S=2,8
PIPE D=30 S=2,8
PIPE D=30 S=2,8
PIPE D=30 S=2,8
PIPE D=30 S=2,8
ELASTIC PIN 8X40
CAGE ROLLER ROTOR D=450 1500C
CAGE ROLLER ROTOR D=450 2000A
CAGE ROLLER ROTOR D=450 2000C
CAGE ROLLER ROTOR D=450 2500A
CAGE ROLLER ROTOR D=450 3000A
CAGE ROLLER ROTOR D=450 3500A
CAGE ROLLER ROTOR D=450 4000A
CAGE ROLLER ROTOR D=450 4500A
GREASE NIPPLE M6X1 7663-A ZN
GASKET H42
SUPPORT FLANGE H.42
SEEGER RING 40X1,75 U7435 C70
STIFFENER RING 40X50X1,5 C70
BEARING D40 D80 BOMB.18 6208
GASKET
BEARING HUB
INNER FLANGE
NUT M12X1,25 D980 8 ZN
BOLT M 12X1,25X25
METALIC GASKET H60
OUTER FLANGE
SELF LOCKING NUT
BEARING D45 D100 B25 1726309-2
STIFFENER RING
INNER FLANGE
BEARING OSCILLATING H.60 S.PAR
COTE ROULEAU GAUCHE PETIT
COTE ROULEAU GAUCHE GRAND
VIS M 12X1,25X30
VIS M12X1,25X35 U5740 8.8 ZN
RONDELLE M12 ZGP EXTRA P.
VIS M12X1,25X40 U5740 8.8 ZN
SUPPORT ROULEMENT H.42 RIC.
VIS M16X1,5 X45 U5740 8.8 ZB
ECRO.M16X 1,5 D980 8 ZB
POUTRE 1500C
POUTRE 2000A
POUTRE 2000C
POUTRE 2500A
POUTRE 3000A
POUTRE 3500A
POUTRE 4000A
POUTRE 4500A
BOUCHON FERMETURE D.34
ROTOR GB.550 1500C
ROTOR GB.550 2000A
ROTOR GB.550 2000C
ROTOR GB.550 2500A
ROTOR GB.550 3000A
ROTOR GB.550 3500A
ROTOR GB.550 4000A
ROTOR GB.550 4500A
TUBE D=30 S=2,8
TUBE D=30 S=2,8
TUBE D=30 S=2,8
TUBE D=30 S=2,8
TUBE D=30 S=2,8
GOUJON ELASTIQUE 8X40
ROTOR ROULEAU A CAGE 450 1500C
ROTOR ROULEAU A CAGE 450 2000A
ROTOR ROULEAU A CAGE 450 2000C
ROTOR ROULEAU A CAGE 450 2500A
ROTOR ROULEAU A CAGE 450 3000A
ROTOR ROULEAU A CAGE 450 3500A
ROTOR ROULEAU A CAGE 450 4000A
ROTOR ROULEAU A CAGE 450 4500A
GRAISS. A BILLE M6X1 7663A ZN
JOINT H42
SUPPORT H.42
BAGUE SEEGER 40X1,75 U7435 C70
BAGUE DE RENFORCEM. 40X50X1,5
ROULEMENT D40 D80 BOMB.18 6208
JOINT
MOYEU
FLASQUE INTERIEUR
ECROU M12X1,25 D980 8 ZN
VIS M 12X1,25X25
JOINT
FLASQUE EXTERIEUR
COLLIER AUTOBL.
ROULEMENT D45 D100
ANNEAU DE RENFORCEMENT
FLASQUE INTERIEUR
ROULEMENT OSCILLANT H.60 P.DET
WALZENSEITENWAND KLEIN
WALZENSEITENWAND GROSS
SCHRAUBE M 12X1,25X30
SCHR.M12X1,25X35 U5740 8.8 ZN
UNTERLEGSCHEIBE M12 ZGP EXTRA
SCHR.M12X1,25X40 U5740 8.8 ZN
LAGERHALTERUNG H.42 P.GETRIEBE
SCHR.M16X1,5 X45 U5740 8.8 ZB
MUTT.M16X 1,5 D980 8 ZB
HAUPTTRAEGER 1500C
HAUPTTRAEGER 2000A
HAUPTTRAEGER 2000C
HAUPTTRAEGER 2500A
HAUPTTRAEGER 3000A
HAUPTTRAEGER 3500A
HAUPTTRAEGER 4000A
HAUPTTRAEGER 4500A
VERSCHLUSSPFRPFEN D.34
STABWALZEROTOR GB.550 1500C
STABWALZEROTOR GB.550 2000A
STABWALZEROTOR GB.550 2000C
STABWALZEROTOR GB.550 2500A
STABWALZEROTOR GB.550 3000A
STABWALZEROTOR GB.550 3500A
STABWALZEROTOR GB.550 4000A
STABWALZEROTOR GB.550 4500A
ROHR D=30 S=2,8
ROHR D=30 S=2,8
ROHR D=30 S=2,8
ROHR D=30 S=2,8
ROHR D=30 S=2,8
SPANNHUELSE 8X40
STABWALZEROTOR D=450 1500C
STABWALZEROTOR D=450 2000A
STABWALZEROTOR D=450 2000C
STABWALZEROTOR D=450 2500A
STABWALZEROTOR D=450 3000A
STABWALZEROTOR D=450 3500A
STABWALZEROTOR D=450 4000A
STABWALZEROTOR D=450 4500A
SCHMIERBUECHE M6X1 7663-A ZN
DICHTUNG H42
HALTER H.42
SEEGERRING 40X1,75 U7435 C70
SEEGER RING 40X50X1,5 C70
LAGER D40 D80 BOMB.18 6208 2RS
DICHTUNG
NABE
INNENFLANSCH
MUTTER M12X1,25 D980 8 ZN
SCHRAUBE M 12X1,25X25
DICHTUNG
AUSSENFLANSCH
SELBSTSP. NUTMUTTER
LAGER D45 D100 B25 1726309-2RS
RING
INNENFLANSCH
LAGER SCHWINGEND H.60 ERSATZT.
FLANCO RODILLO PEQUEÑA
FLANCO RODILLO GRANDE
TORNILLO M 12X1,25X30
TORN.M12X1,25X35 U5740 8.8 ZN
ARANDELA M12 ZGP EXTRA P.
TORN. M12X1,25X40 U5740 8.8 ZN
SOPORTE COJINETE H.42 RIC.
TORN.M16X1,5 X45 U5740 8.8 ZB
TUER.M16X 1,5 D980 8 ZB
VIGA 1500C
VIGA 2000A
VIGA 2000C
VIGA 2500A
VIGA 3000A
VIGA 3500A
VIGA 4000A
VIGA 4500A
TAPON CLAUSURA D.34
ROTOR RODIL.BARR.GB.550 1500C
ROTOR RODIL.BARRAS GB.550 2000
ROTOR RODIL.BARR.GB.550 2000C
ROTOR RODIL.BARRAS GB.550 2500
ROTOR RODIL.BARRAS GB.550 3000
ROTOR RODIL.BARRAS GB.550 3500
ROTOR RODIL.BARRAS GB.550 4000
ROTOR RODIL.BARRAS GB.550 4500
TUBO D=30 S=2,8
TUBO D=30 S=2,8
TUBO D=30 S=2,8
TUBO D=30 S=2,8
TUBO D=30 S=2,8
ESPINA ELASTICA 8X40
ROTOR RODILLO BARRAS 450 1500C
ROTOR RODILLO BARRAS 450 2000A
ROTOR RODILLO BARRAS 450 2000C
ROTOR RODILLO BARRAS 450 2500A
ROTOR RODILLO BARRAS 450 3000A
ROTOR RODILLO BARRAS 450 3500A
ROTOR RODILLO BARRAS 450 4000A
ROTOR RODILLO BARRAS 450 4500A
ENGRAS. DE ESFERAS M6X1 7663-A
JUNTA
SOPORTE H.42
ANIL.SEEGER 40X1,75 U7435 C70
ANILLO REFUERZO 40X50X1,5
COJINETE D40 D80 BOMB.18 6208
JUNTA
CUBO
BRIDA INTERNA
TUERCA M12X1,25 D980 8 ZN
TORNILLO M 12X1,25X25
JUNTA
BRIDA EXTERIOR
VIROLA AUTOBL.
COJINETE D45 D100
ANILLO REFUERZO
BRIDA INTERIOR
COJINETE OSCILANTE H.60 P.REP.
cod. F07010546
27
TAV. PK01
28
cod. F07010546
TAV. PK01
Pos.
Cod.
Descrizione
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
36
37
38
39
40
41
42
43
45
46
47
48
49
50
51
52
54
55
56
57
58
59
60
61
63
64
65
M43400700
M43400701
F01480123
F01010283
F01010288
F01010291
M43400467
M43400468
F01010341
M23400775
M23400776
M23400494
F01010082
F01410088
F01220070
F01220059
F01220034
F01410064
M23400958
F01060208
M23400493
M23400495
F01010319
F01220033
F01220266
F20110800
M23418980
M23420980
M23423980
M23425980
M23430980
M23435980
M23440980
M23445980
M43418457
M43420457
M43423457
M43425457
M43430457
M43435457
M43440457
M43445457
M23418711
M23420711
M23423711
M23425711
M23430711
M23435711
M23440711
M23445711
M23418712
M23420712
M23423712
M23425712
M23430712
M23435712
M23440712
M23445712
M23418713
M23420713
M23423713
FIANCATA RULLO PICCOLA
FIANCATA RULLO GRANDE
ROS.G 12,5X22,9X 4 EX.C70 ZN
VITE M12X1,25X30 U5740 8.8 ZN
VITE M12X1,25X35 U5740 8.8 ZN
VITE M12X1,25X40 U5740 8.8 ZN
COMP.SUPP.CUSC.OSCIL.H42 X RIC
COMP.SUPP.CUSC.OSCIL.H60 X RIC
VITE M16X1,5 X45 U5740 8.8 ZN
GRUPPO COLLEGAMENTO RIF.TRAVE
GRUPPO COLLEGAMENTO RIF.TRAVE
PIATTO DI REGOLAZIONE
VITE M14X1,5 X50 U5738 8.8 ZN
ROS.M14 15X 28X2,5 U6592 ZN
DADO M16X 1,5 D980 8 ZN
DADO M14X 1,5 D980 8 ZN
DADO M10X1,25 D980 8 ZN
ROS.M10 10,5X 20X 2 U6592 ZN
PIASTRINA RASCHIATERRA PER PK
VITE M10X1,5X25 U5731*8.8 ZN
PIASTRA DI COLLEG.PICCOLA
PIASTRA PER TRAVE
VITE M14X1,5 X45 U5740 8.8 ZN
DADO M10X 1,5 D980 8 ZN
DADO M16X 2 D980 8 ZN
CAV.Q.M16X 2X 40 118X135 ZN
TRAVE POST.RULLO PK 1500C
TRAVE POST.RULLO PK 2000A
TRAVE POST.RULLO PK 2000C
TRAVE POST.RULLO PK 2500A
TRAVE POST.RULLO PK 3000A
TRAVE POST.RULLO PK 3500A
TRAVE POST.RULLO PK 4000A
TRAVE POST.RULLO PK 4500A
TRAVE ANTERIORE RULLO 1500C
TRAVE ANTERIORE RULLO 2000A
TRAVE ANTERIORE RULLO 2000C
TRAVE ANTERIORE RULLO 2500A
TRAVE ANTERIORE RULLO 3000A
TRAVE ANTERIORE RULLO 3500A
TRAVE ANTERIORE RULLO 4000A
TRAVE ANTERIORE RULLO 4500A
ROTORE*RULLO PK.600 1500C
ROTORE*RULLO PK.600 2000A
ROTORE*RULLO PK.600 2000C
ROTORE*RULLO PK.600 2500A
ROTORE*RULLO PK.600 3000A
ROTORE*RULLO PK.600 3500A
ROTORE*RULLO PK.600 4000A
ROTORE*RULLO PK.600 4500A
ROTORE*RULLO PK.500 1500C
ROTORE*RULLO PK.500 2000A
ROTORE*RULLO PK.500 2000C
ROTORE*RULLO PK.500 2500A
ROTORE*RULLO PK.500 3000A
ROTORE*RULLO PK.500 3500A
ROTORE*RULLO PK.500 4000A
ROTORE*RULLO PK.500 4500A
ROTORE*RULLO PK.450 1500C
ROTORE*RULLO PK.450 2000A
ROTORE*RULLO PK.450 2000C
cod. F07010546
Description
ROLLER SIDE PANEL SMALL
ROLLER SIDE PANEL BIG
WASHER M12 ZGP EXTRA P.
BOLT M 12X1,25X30
SCREW M12X1,25X35 U5740 8.8 ZN
SCREW M12X1,25X40 U5740 8.8 ZN
COMPLETE BEARING SUPPORT H42
BEARING OSCILLATING H.60 S.PAR
BOLT M16X1,5 X45 U5740 8.8 ZB
BEAM LINK ASSEMBLY
BEAM LINK ASSEMBLY
ADJUSTER PLATE
BOLT M 14X1,5X50
WAS.M14 15X 28X2,5 U6592 ZB
NUT M16X 1,5 D980 8 ZB
NUT M14X 1,5 D980 8 ZB
NUT M10X1,25 D980 8 ZB
WASHER M10 10,5X20X2 U6592 ZN
SCRETCHING PLATE FOR PK ROLLER
BOLT M10X1,5X25
BLADE
BLADE
BOLT M14X 1,5X 45 U5740 8.8 ZB
NUT M10X 1,5 D980 8 ZN
NUT M16X 2 D980 8 ZN
U BOLT M16X 2X 40 118X135 ZN
SOIL SCRAPER FRAME PK 1500C
SOIL SCRAPER FRAME PK 2000A
SOIL SCRAPER FRAME PK 2000C
SOIL SCRAPER FRAME PK 2500A
SOIL SCRAPER FRAME PK 3000A
SOIL SCRAPER FRAME PK 3500A
SOIL SCRAPER FRAME PK 4000A
SOIL SCRAPER FRAME PK 4500A
BEAM 1500C
BEAM 2000A
BEAM 2000C
BEAM 2500A
BEAM 3000A
BEAM 3500A
BEAM 4000A
BEAM 4500A
PACKER ROLLER ROTOR 1500C D600
PACKER ROLLER ROTOR 2000A D600
PACKER ROLLER ROTOR 2000C D600
PACKER ROLLER ROTOR 2500A D600
PACKER ROLLER ROTOR 3000A D600
PACKER ROLLER ROTOR 3500A D600
PACKER ROLLER ROTOR 4000A D600
PACKER ROLLER ROTOR 4500A D600
PACKER ROLLER ROTOR 1500C D500
PACKER ROLLER ROTOR 2000A D500
PACKER ROLLER ROTOR 2000C D500
PACKER ROLLER ROTOR 2500 D500
PACKER ROLLER ROTOR 3000 D500
PACKER ROLLER ROTOR 3500 D500
PACKER ROLLER ROTOR 4000 D500
PACKER ROLLER ROTOR 4500 D500
PACKER ROLLER ROTOR 1500C D450
PACKER ROLLER ROTOR 2000A D450
PACKER ROLLER ROTOR 2000C D450
Description
Benennung
COTE ROULEAU GAUCHE PETIT
COTE ROULEAU GAUCHE GRAND
RONDELLE M12 ZGP EXTRA P.
VIS M 12X1,25X30
VIS M12X1,25X35 U5740 8.8 ZN
VIS M12X1,25X40 U5740 8.8 ZN
SUPPORT ROULEMENT H.42 RIC.
ROULEMENT OSCILLANT H.60 P.DET
VIS M16X1,5 X45 U5740 8.8 ZB
GROUPE DE CONNEXION
GROUPE DE CONNEXION
PLAQUETTE DE REGISTRE
VIS M 14X1,5X50
RON.M14 15X 28X2,5 U6592 ZB
ECRO.M16X 1,5 D980 8 ZB
ECROU M14X 1,5 D980 8 ZB
ECRO.M10X1,25 D980 8 ZB
RONDELL.M10 10,5X20X2 U6592 ZN
PLAT DU DECROT.ROUL.PK
VIS M10X1,5X25
LAME
LAME
VIS M14X1,5 X45 U5740 8.8 ZB
ECROU M10X 1,5 D980 8 ZN
ECROU M16X 2 D980 8 ZN
ATTEL.M16X 2X 40 118X135 ZB
CHASSIS ATT.DECROT PK 1500C
CHASSIS ATT.DECROT PK 2000A
CHASSIS ATT.DECROT PK 2000C
CHASSIS ATT.DECROTTOIR PK 2500A
CHASSIS ATT.DECROTTOIR PK 3000A
CHASSIS ATT.DECROTTOIR PK 3500A
CHASSIS ATT.DECROTTOIR PK 4000A
CHASSIS ATT.DECROTTOIR PK 4500A
POUTRE 1500C
POUTRE 2000A
POUTRE 2000C
POUTRE 2500A
POUTRE 3000A
POUTRE 3500A
POUTRE 4000A
POUTRE 4500A
ROTOR D600 1500C HERSE
ROTOR D600 2000A HERSE
ROTOR D600 2000C HERSE
ROTOR D600 2500A HERSE
ROTOR D600 3000A HERSE
ROTOR D600 3500A HERSE
ROTOR D600 4000A HERSE
ROTOR D600 4500A HERSE
ROTOR D500 1500C HERSE
ROTOR D500 2000A HERSE
ROTOR D500 2000C HERSE
ROTOR D500 2500 HERSE
ROTOR D500 3000 HERSE
ROTOR D500 3500 HERSE
ROTOR D500 4000 HERSE
ROTOR D500 4500 HERSE
ROTOR D450 1500C HERSE
ROTOR D450 2000A HERSE
ROTOR D450 2000C HERSE
WALZENSEITENWAND KLEIN
WALZENSEITENWAND GROSS
UNTERLEGSCHEIBE M12 ZGP EXTRA
SCHRAUBE M 12X1,25X30
SCHR.M12X1,25X35 U5740 8.8 ZN
SCHR.M12X1,25X40 U5740 8.8 ZN
LAGERHALTERUNG H.42 P.GETRIEBE
LAGER SCHWINGEND H.60 ERSATZT.
SCHR.M16X1,5 X45 U5740 8.8 ZB
VERBINDUNG SATZ
VERBINDUNG SATZ
REGULIERUNGSPLATTE
SCHRAUBE M 14X1,5X50
SCH.M14 15X 28X2,5 U6592 ZB
MUTT.M16X 1,5 D980 8 ZB
MUTTER M14X 1,5 D980 8 ZB
MUTT.M10X1,25 D980 8 ZB
SCHEIBE M10 10,5X20X2 U6592 ZN
ABSTREIFER PLATTE PK
SCHRAUBE M10X1,5X25
MESSER
MESSER
SCH. M14X1,5 X45 U5740 8.8 ZB
MUTTER M10X 1,5 D980 8 ZN
MUTTER M16X 2 D980 8 ZN
VERBI.M16X 2X 40 118X135 ZB
ABSTREIFERRAHMEN PK 1500C
ABSTREIFERRAHMEN PK 2000A
ABSTREIFERRAHMEN PK 2000C
ABSTREIFERRAHMEN PK 2500A
ABSTREIFERRAHMEN PK 3000A
ABSTREIFERRAHMEN PK 3500A
ABSTREIFERRAHMEN PK 4000A
ABSTREIFERRAHMEN PK 4500A
HAUPTTRAEGER 1500C
HAUPTTRAEGER 2000A
HAUPTTRAEGER 2000C
HAUPTTRAEGER 2500A
HAUPTTRAEGER 3000A
HAUPTTRAEGER 3500A
HAUPTTRAEGER 4000A
HAUPTTRAEGER 4500A
PACKERWALZEROTOR 1500C D600
PACKERWALZEROTOR 2000A D600
PACKERWALZEROTOR 2000C D600
PACKERWALZEROTOR 2500A D600
PACKERWALZEROTOR 3000A D600
PACKERWALZEROTOR 3500A D600
PACKERWALZEROTOR 4000A D600
PACKERWALZEROTOR 4500A D600
PACKERWALZEROTOR 1500C D500
PACKERWALZEROTOR 2000A D500
PACKERWALZEROTOR 2000C D500
PACKERWALZEROTOR 2500 D500
PACKERWALZEROTOR 3000 D500
PACKERWALZEROTOR 3500 D500
PACKERWALZEROTOR 4000 D500
PACKERWALZEROTOR 4500 D500
PACKERWALZEROTOR 1500C D450
PACKERWALZEROTOR 2000A D450
PACKERWALZEROTOR 2000C D450
Descripcion
FLANCO RODILLO PEQUEÑA
FLANCO RODILLO GRANDE
ARANDELA M12 ZGP EXTRA P.
TORNILLO M 12X1,25X30
TORN.M12X1,25X35 U5740 8.8 ZN
TORN. M12X1,25X40 U5740 8.8 ZN
SOPORTE COJINETE H.42 RIC.
COJINETE OSCILANTE H.60 P.REP.
TORN.M16X1,5 X45 U5740 8.8 ZB
GRUPO DE CONEXION
GRUPO DE CONEXION
PLAQUITA REGISTRO
TORNILLO M 14X1,5X50
ARA.M14 15X 28X2,5 U6592 ZB
TUER.M16X 1,5 D980 8 ZB
TUERCA M14X 1,5 D980 8 ZB
TUER.M10X1,25 D980 8 ZB
ARAND. M10 10,5X20X2 U6592 ZN
PLACA RASQUETA PK
TORNILLO M10X1,5X25
CUCHILLA
CUCHILLA
TORNILLO M14X1,5 X45 U5740 8.8
TUERCA M10X 1,5 D980 8 ZN
TUERCA M16X 2 D980 8 ZN
PERNO M16X 2X 40 118X135 ZB
TELAR ATAQ.RASQ PK 1500C
TELAR ATAQ.RASQ PK 2000A
TELAR ATAQ.RASQ PK 2000C
TELAR ATAQ.RASQUETA PK 2500A
TELAR ATAQ.RASQUETA PK 3000A
TELAR ATAQ.RASQUETA PK 3500A
TELAR ATAQ.RASQUETA PK 4000A
TELAR ATAQ.RASQUETA PK 4500A
VIGA 1500C
VIGA 2000A
VIGA 2000C
VIGA 2500A
VIGA 3000A
VIGA 3500A
VIGA 4000A
VIGA 4500A
ROTOR RODILLO PACK 1500C D600
ROTOR RODILLO PACK 2000A D600
ROTOR RODILLO PACK 2000C D600
ROTOR RODIL PACKER 2500A D600
ROTOR RODIL PACKER 3000A D600
ROTOR RODIL PACKER 3500A D600
ROTOR RODIL PACKER 4000A D600
ROTOR RODIL PACKER 4500A D600
ROTOR RODILLO PACK 1500C D500
ROTOR RODILLO PACK 2000A D500
ROTOR RODILLO PACK 2000C D500
ROTOR RODILLO PACKER 2500 D500
ROTOR RODILLO PACKER 3000 D500
ROTOR RODILLO PACKER 3500 D500
ROTOR RODILLO PACKER 4000 D500
ROTOR RODILLO PACKER 4500 D500
ROTOR RODILLO PACK 1500C D450
ROTOR RODILLO PACK 2000A D450
ROTOR RODILLO PACK 2000C D450
29
TAV. PK01
30
cod. F07010546
TAV. PK01
Pos.
Cod.
Descrizione
66
67
68
69
70
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
92
93
94
95
96
98
99
100
101
102
103
104
105
107
108
109
110
111
112
113
114
M23425713
M23430713
M23435713
M23440713
M23445713
F01100011
M43400705
M23400436
F02010034
F04010225
M61100441
M23400435
M43400704
M23400439
F02050168
M48000307
F04010184
M38100990
M23400438
M43400707
F01010281
F01220047
M43425482
M43430482
M43435482
M43440482
M43445482
M43418483
M43420483
M43423483
M43425483
M43430483
M43435483
M43440483
M43445483
M43418484
M43420484
M43423484
M43425484
M43430484
M43435484
M43440484
M43445484
ROTORE*RULLO PK.450 2500A
ROTORE*RULLO PK.450 3000A
ROTORE*RULLO PK.450 3500A
ROTORE*RULLO PK.450 4000A
ROTORE*RULLO PK.450 4500A
ING.M 6X1 7663-A 9SMNPB28 ZN
GUARNIZIONE METALLICA H60
FLANGIA ESTERNA SUP.CUSC.OSC.
GHIERA AU.GUK M40X1,5 T.4H ZN
CUSC.D45 D100 B25 1726309-2RS1
ANELLO T. 52X 90X 6 SPEC.
MOZZO CUSCINETTO OSCILL.H60
GUARNIZIONE METALLICA H42
FLANGIA SUPP. RULLO OSC. H. 42
ANELLO E. DE 40X1,75 U7435 C70
ANELLO RINF.40X50X1,5 C70 TEMP
CUSC.D40 D80 BOMB.18 6208 2RS1
GUARNIZIONE ELASTICA
MOZZO CUSCINETTO OSCILLANTE
FLANGIA SPESSORE
VITE M12X1,25X25 U5740 8.8 ZN
DADO M12X1,25 D980 8 ZN
ROTORE*RULLO PK.600 2500A
ROTORE*RULLO PK.600 3000A
ROTORE*RULLO PK.600 3500A
ROTORE*RULLO PK.600 4000A
ROTORE*RULLO PK.600 4500A
ROTORE*RULLO PK.500 1500C
ROTORE*RULLO PK.500 2000A
ROTORE*RULLO PK.500 2000C
ROTORE*RULLO PK.500 2500A
ROTORE*RULLO PK.500 3000A
ROTORE*RULLO PK.500 3500A
ROTORE*RULLO PK.500 4000A
ROTORE*RULLO PK.500 4500A
ROTORE*RULLO PK.450 1500C
ROTORE*RULLO PK.450 2000A
ROTORE*RULLO PK.450 2000C
ROTORE*RULLO PK.450 2500A
ROTORE*RULLO PK.450 3000A
ROTORE*RULLO PK.450 3500A
ROTORE*RULLO PK.450 4000A
ROTORE*RULLO PK.450 4500A
cod. F07010546
Description
PACKER ROLLER ROTOR 2500A D450
PACKER ROLLER ROTOR 3000A D450
PACKER ROLLER ROTOR 3500A 4500
PACKER ROLLER ROTOR 4000A D450
PACKER ROLLER ROTOR 4500A D450
GREASE NIPPLE M6X1 7663-A ZN
METALIC GASKET H60
OUTER FLANGE
SELF LOCKING NUT
BEARING D45 D100 B25 1726309-2
STIFFENER RING
INNER FLANGE
GASKET H42
SUPPORT FLANGE H.42
SEEGER RING 40X1,75 U7435 C70
STIFFENER RING 40X50X1,5 C70
BEARING D40 D80 BOMB.18 6208
GASKET
BEARING HUB
INNER FLANGE
BOLT M 12X1,25X25
NUT M12X1,25 D980 8 ZN
PACKER ROLLER ROTOR D600 2500A
PACKER ROLLER ROTOR D600 3000A
PACKER ROLLER ROTOR D600 3500A
PACKER ROLLER ROTOR D600 4000A
PACKER ROLLER ROTOR D600 4500A
PACKER ROLLER ROTOR 1500C D500
PACKER ROLLER ROTOR 2000A D500
PACKER ROLLER ROTOR 2000C D500
PACKER ROLLER ROTOR 2500 D500
PACKER ROLLER ROTOR 3000 D500
PACKER ROLLER ROTOR 3500 D500
PACKER ROLLER ROTOR 4000 D500
PACKER ROLLER ROTOR 4500 D500
PACKER ROLLER ROTOR 1500C D450
PACKER ROLLER ROTOR 2000A D450
PACKER ROLLER ROTOR 2000C D450
PACKER ROLLER ROTOR 2500A D450
PACKER ROLLER ROTOR 3000A D450
PACKER ROLLER ROTOR 3500A D450
PACKER ROLLER ROTOR 4000A D450
PACKER ROLLER ROTOR 4500A D450
Description
Benennung
ROTOR D450 2500A HERSE
ROTOR D450 3000A HERSE
ROTOR D450 3500A HERSE
ROTOR D450 4000A HERSE
ROTOR D450 4500A HERSE
GRAISS. A BILLE M6X1 7663A ZN
JOINT
FLASQUE EXTERIEUR
COLLIER AUTOBL.
ROULEMENT D45 D100
ANNEAU DE RENFORCEMENT
FLASQUE INTERIEUR
JOINT H42
SUPPORT H.42
BAGUE SEEGER 40X1,75 U7435 C70
BAGUE DE RENFORCEM. 40X50X1,5
ROULEMENT D40 D80 BOMB.18 6208
JOINT
MOYEU
FLASQUE INTERIEUR
VIS M 12X1,25X25
ECROU M12X1,25 D980 8 ZN
ROTOR PK D600 2500A
ROTOR PK D600 3000A
ROTOR PK D600 3500A
ROTOR PK D600 4000A
ROTOR PK D600 4500A
ROTOR D500 1500C HERSE
ROTOR D500 2000A HERSE
ROTOR D500 2000C HERSE
ROTOR D500 2500 HERSE
ROTOR D500 3000 HERSE
ROTOR D500 3500 HERSE
ROTOR D500 4000 HERSE
ROTOR D500 4500 HERSE
ROTOR D450 1500C HERSE
ROTOR D450 2000A HERSE
ROTOR D450 2000C HERSE
ROTOR D450 2500A HERSE
ROTOR D450 3000A HERSE
ROTOR D450 3500A HERSE
ROTOR D450 4000A HERSE
ROTOR D450 4500A HERSE
PACKERWALZEROTOR 2500A D450
PACKERWALZEROTOR 3000A D450
PACKERWALZEROTOR 3500A D450
PACKERWALZEROTOR 4000A D450
PACKERWALZEROTOR 4500A D450
SCHMIERBUECHE M6X1 7663-A ZN
DICHTUNG
AUSSENFLANSCH
SELBSTSP. NUTMUTTER
LAGER D45 D100 B25 1726309-2RS
RING
INNENFLANSCH
DICHTUNG H42
HALTER H.42
SEEGERRING 40X1,75 U7435 C70
SEEGER RING 40X50X1,5 C70
LAGER D40 D80 BOMB.18 6208 2RS
DICHTUNG
NABE
INNENFLANSCH
SCHRAUBE M 12X1,25X25
MUTTER M12X1,25 D980 8 ZN
PACKERWALZEROTOR D600 2500A
PACKERWALZEROTOR D600 3000A
PACKERWALZEROTOR D600 3500A
PACKERWALZEROTOR D600 4000A
PACKERWALZEROTOR D600 4500A
PACKERWALZEROTOR 1500C D500
PACKERWALZEROTOR 2000A D500
PACKERWALZEROTOR 2000C D500
PACKERWALZEROTOR 2500 D500
PACKERWALZEROTOR 3000 D500
PACKERWALZEROTOR 3500 D500
PACKERWALZEROTOR 4000 D500
PACKERWALZEROTOR 4500 D500
PACKERWALZEROTOR 1500C D450
PACKERWALZEROTOR 2000A D450
PACKERWALZEROTOR 2000C D450
PACKERWALZEROTOR 2500A D450
PACKERWALZEROTOR 3000A D450
PACKERWALZEROTOR 3500A D450
PACKERWALZEROTOR 4000A D450
PACKERWALZEROTOR 4500A D450
Descripcion
ROTOR RODILLO PACK 2500A D450
ROTOR RODIL PACK 3000A D450
ROTOR RODILLO PACK 3500A D450
ROTOR RODILLO PACK 4000A D450
ROTOR RODILLO PACK 4500A D450
ENGRAS. DE ESFERAS M6X1 7663-A
JUNTA
BRIDA EXTERIOR
VIROLA AUTOBL.
COJINETE D45 D100
ANILLO REFUERZO
BRIDA INTERIOR
JUNTA
SOPORTE H.42
ANIL.SEEGER 40X1,75 U7435 C70
ANILLO REFUERZO 40X50X1,5
COJINETE D40 D80 BOMB.18 6208
JUNTA
CUBO
BRIDA INTERNA
TORNILLO M 12X1,25X25
TUERCA M12X1,25 D980 8 ZN
ROTOR RODILLO PACK 1500C D600
ROTOR RODILLO PACK 3000A D600
ROTOR RODILLO PACK 3500A D600
ROTOR RODILLO PACK 4000A D600
ROTOR RODILLO PACK 4500A D600
ROTOR RODILLO PACK 1500C D500
ROTOR RODILLO PACK 2000A D500
ROTOR RODILLO PACK 2000C D500
ROTOR RODILLO PACKER 2500 D500
ROTOR RODILLO PACKER 3000 D500
ROTOR RODILLO PACKER 3500 D500
ROTOR RODILLO PACKER 4000 D500
ROTOR RODILLO PACKER 4500 D500
ROTOR RODILLO PACK 1500C D450
ROTOR RODILLO PACK 2000A D450
ROTOR RODILLO PACK 2000C D450
ROTOR RODILLO PACK 2500A D450
ROTOR RODIL PACK 3000A D450
ROTOR RODIL PACK 3500A D450
ROTOR RODIL PACK 4000A D450
ROTOR RODIL PACK 4500A D450
31
TAV. FL01
32
cod. F07010546
TAV. FL01
Pos.
Cod.
Descrizione
Description
Description
Benennung
Descripcion
1
2
3
4
5
6
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
34
35
36
37
38
39
40
41
43
44
45
46
47
48
49
52
53
54
55
56
57
58
M43400700
F01480123
F01010288
F01010291
M43400468
F01010341
F01010082
F01410088
F01220070
F01220059
F01220034
F01410064
M23400788
F01060208
M23400493
M23400495
F01220033
F20110730
F20110800
F01010319
F01230085
M23418981
M23420981
M23423981
M23425981
M23430981
M23435981
M23440981
M23445981
M43418457
M43420457
M43423457
M43425457
M43430457
M43435457
M43440457
M43445457
M23418722
M23420722
M23423722
M23425722
M23430722
M23435722
M23440722
F01100011
M43400705
M23400436
F02010034
F04010225
M61100441
M23400435
FIANCATA RULLO PICCOLA
ROS.G 12,5X22,9X 4 EX.C70 ZN
VITE M12X1,25X35 U5740 8.8 ZN
VITE M12X1,25X40 U5740 8.8 ZN
COMP.SUPP.CUSC.OSCIL.H60 X RIC
VITE M16X1,5 X45 U5740 8.8 ZN
VITE M14X1,5 X50 U5738 8.8 ZN
ROS.M14 15X 28X2,5 U6592 ZN
DADO M16X 1,5 D980 8 ZN
DADO M14X 1,5 D980 8 ZN
DADO M10X1,25 D980 8 ZN
ROS.M10 10,5X 20X 2 U6592 ZN
PIASTRA RASCHIATERRRA PER FL
VITE M10X1,5X25 U5731*8.8 ZN
PIASTRA DI COLLEG.PICCOLA
PIASTRA PER TRAVE
DADO M10X 1,5 D980 8 ZN
CAV.Q.M10X 1,5X 30 91X 99 ZN
CAV.Q.M16X 2X 40 118X135 ZN
VITE M14X1,5 X45 U5740 8.8 ZN
DADO M16X 2 D982 8 ZN
TRAVE POST.RULLO FL500 1500C
TRAVE POST.RULLO FL500 2000A
TRAVE POST.RULLO FL500 2000C
TRAVE POST.RULLO FL500 2500A
TRAVE POST.RULLO FL500 3000A
TRAVE POST.RULLO FL500 3500A
TRAVE POST.RULLO FL500 4000A
TRAVE POST.RULLO FL500 4500A
TRAVE ANTERIORE RULLO 1500C
TRAVE ANTERIORE RULLO 2000A
TRAVE ANTERIORE RULLO 2000C
TRAVE ANTERIORE RULLO 2500A
TRAVE ANTERIORE RULLO 3000A
TRAVE ANTERIORE RULLO 3500A
TRAVE ANTERIORE RULLO 4000A
TRAVE ANTERIORE RULLO 4500A
ROTORE*RULLO FL.500 1800A
ROTORE*RULLO FL.500 2000A
ROTORE*RULLO FL.500 2000C
ROTORE*RULLO FL.500 2500A
ROTORE*RULLO FL.500 3000A
ROTORE*RULLO FL.500 3500A
ROTORE*RULLO FL.500 4000A
ING.M 6X1 7663-A 9SMNPB28 ZN
GUARNIZIONE METALLICA H60
FLANGIA ESTERNA SUP.CUSC.OSC.
GHIERA AU.GUK M40X1,5 T.4H ZN
CUSC.D45 D100 B25 1726309-2RS1
ANELLO T. 52X 90X 6 SPEC.
MOZZO CUSCINETTO OSCILL.H60
ROLLER SIDE PANEL SMALL
WASHER M12 ZGP EXTRA P.
SCREW M12X1,25X35 U5740 8.8 ZN
SCREW M12X1,25X40 U5740 8.8 ZN
BEARING OSCILLATING H.60 S.PAR
BOLT M16X1,5 X45 U5740 8.8 ZB
BOLT M 14X1,5X50
WAS.M14 15X 28X2,5 U6592 ZB
NUT M16X 1,5 D980 8 ZB
NUT M14X 1,5 D980 8 ZB
NUT M10X1,25 D980 8 ZB
WASHER M10 10,5X20X2 U6592 ZN
SCRETCHING PLATE FL
BOLT M10X1,5X25
BLADE
BLADE
NUT M10X 1,5 D980 8 ZN
STRIKER M10X 1,5X 30 91X 99 ZB
U BOLT M16X 2X 40 118X135 ZN
BOLT M14X 1,5X 45 U5740 8.8 ZB
NUT M16X 2 D982 8 ZN
SOIL SCRAPER FRAME FL500 1500C
SOIL SCRAPER FRAME FL500 2000A
SOIL SCRAPER FRAME FL500 2000C
SOIL SCRAPER FRAME FL500 2500A
SOIL SCRAPER FRAME FL500 3000A
SOIL SCRAP FRAME FL500 3500A
SOIL SCRAP FRAME FL500 4000A
SOIL SCRAP FRAME FL500 4500A
BEAM 1500C
BEAM 2000A
BEAM 2000C
BEAM 2500A
BEAM 3000A
BEAM 3500A
BEAM 4000A
BEAM 4500A
CRUMBLER ROLLER ROTOR 1800A
CRUMBLER ROLLER ROTOR 2000A
CRUMBLER ROLLER ROTOR 2000C
CRUMBLER ROLLER ROTOR 2500A
CRUMBLER ROLLER ROTOR 3000A
CRUMBLER ROLLER ROTOR 3500A
CRUMBLER ROLLER ROTOR 4000A
GREASE NIPPLE M6X1 7663-A ZN
METALIC GASKET H60
OUTER FLANGE
SELF LOCKING NUT
BEARING D45 D100 B25 1726309-2
STIFFENER RING
INNER FLANGE
COTE ROULEAU GAUCHE PETIT
RONDELLE M12 ZGP EXTRA P.
VIS M12X1,25X35 U5740 8.8 ZN
VIS M12X1,25X40 U5740 8.8 ZN
ROULEMENT OSCILLANT H.60 P.DET
VIS M16X1,5 X45 U5740 8.8 ZB
VIS M 14X1,5X50
RON.M14 15X 28X2,5 U6592 ZB
ECRO.M16X 1,5 D980 8 ZB
ECROU M14X 1,5 D980 8 ZB
ECRO.M10X1,25 D980 8 ZB
RONDELL.M10 10,5X20X2 U6592 ZN
PLAT DU DECROT.ROUL.FL
VIS M10X1,5X25
LAME
LAME
ECROU M10X 1,5 D980 8 ZN
BUTEE M10X 1,5X 30 91X 99 ZB
ATTEL.M16X 2X 40 118X135 ZB
VIS M14X1,5 X45 U5740 8.8 ZB
ECROU M16X 2 D982 8 ZN
CHASSIS ATT.DECROT FL500 1500C
CHASSIS ATT.DECROT FL500 2000A
CHASSIS ATT.DECROT FL500 2000C
CHASSIS ATT.DECROT FL500 2500A
CHASSIS ATT.DECR.FL500 3000A
CHASSIS ATT.DECROT FL500 3500A
CHASSIS ATT.DECROT FL500 4000A
CHASSIS ATT.DECROT FL500 4500A
POUTRE 1500C
POUTRE 2000A
POUTRE 2000C
POUTRE 2500A
POUTRE 3000A
POUTRE 3500A
POUTRE 4000A
POUTRE 4500A
ROTOR ROULEAU A FLASQUES 1800A
ROTOR ROULEAU A FLASQUES 2000A
ROTOR ROULEAU A FLASQUES 2000C
ROTOR ROULEAU A FLASQUES 2500A
ROTOR ROULEAU A FLASQUES 3000A
ROTOR ROULEAU A FLASQUES 3500A
ROTOR ROULEAU A FLASQUES 4000A
GRAISS. A BILLE M6X1 7663A ZN
JOINT
FLASQUE EXTERIEUR
COLLIER AUTOBL.
ROULEMENT D45 D100
ANNEAU DE RENFORCEMENT
FLASQUE INTERIEUR
WALZENSEITENWAND KLEIN
UNTERLEGSCHEIBE M12 ZGP EXTRA
SCHR.M12X1,25X35 U5740 8.8 ZN
SCHR.M12X1,25X40 U5740 8.8 ZN
LAGER SCHWINGEND H.60 ERSATZT.
SCHR.M16X1,5 X45 U5740 8.8 ZB
SCHRAUBE M 14X1,5X50
SCH.M14 15X 28X2,5 U6592 ZB
MUTT.M16X 1,5 D980 8 ZB
MUTTER M14X 1,5 D980 8 ZB
MUTT.M10X1,25 D980 8 ZB
SCHEIBE M10 10,5X20X2 U6592 ZN
ABSTREIFER PLATTE FL
SCHRAUBE M10X1,5X25
MESSER
MESSER
MUTTER M10X 1,5 D980 8 ZN
ANSCHLAG M10X 1,5X 30 91X 99
VERBI.M16X 2X 40 118X135 ZB
SCH. M14X1,5 X45 U5740 8.8 ZB
MUTTER M16X 2 D982 8 ZN
ABSTREIFERRAHMEN FL 500 1500C
ABSTREIFERRAHMEN FL 500 2000A
ABSTREIFERRAHMEN FL 500 2000C
ABSTREIFERRAH FL 500 2500A
ABSTREIFERRAHMEN FL 500 3000A
ABSTREIFERRAHMEN FL500 3500A
ABSTREIFERRAHMEN FL500 4000A
ABSTREIFERRAHMEN FL500 4500A
HAUPTTRAEGER 1500C
HAUPTTRAEGER 2000A
HAUPTTRAEGER 2000C
HAUPTTRAEGER 2500A
HAUPTTRAEGER 3000A
HAUPTTRAEGER 3500A
HAUPTTRAEGER 4000A
HAUPTTRAEGER 4500A
KRUMENPACKERWALZE ROTOR 1800A
KRUMENPACKERWALZE ROTOR 2000A
KRUMENPACKERWALZE ROTOR 2000C
KRUMENPACKERWALZE ROTOR 2500A
KRUMENPACKERWALZE ROTOR 3000A
KRUMENPACKERWALZE ROTOR 3500A
KRUMENPACKERWALZE ROTOR 4000A
SCHMIERBUECHE M6X1 7663-A ZN
DICHTUNG
AUSSENFLANSCH
SELBSTSP. NUTMUTTER
LAGER D45 D100 B25 1726309-2RS
RING
INNENFLANSCH
FLANCO RODILLO PEQUEÑA
ARANDELA M12 ZGP EXTRA P.
TORN.M12X1,25X35 U5740 8.8 ZN
TORN. M12X1,25X40 U5740 8.8 ZN
COJINETE OSCILANTE H.60 P.REP.
TORN.M16X1,5 X45 U5740 8.8 ZB
TORNILLO M 14X1,5X50
ARA.M14 15X 28X2,5 U6592 ZB
TUER.M16X 1,5 D980 8 ZB
TUERCA M14X 1,5 D980 8 ZB
TUER.M10X1,25 D980 8 ZB
ARAND. M10 10,5X20X2 U6592 ZN
PLACA RASQUETA FL
TORNILLO M10X1,5X25
CUCHILLA
CUCHILLA
TUERCA M10X 1,5 D980 8 ZN
EL. DE EMPALME M10X 1,5X 30
PERNO M16X 2X 40 118X135 ZB
TORNILLO M14X1,5 X45 U5740 8.8
TUERCA M16X 2 D982 8 ZN
TELAR ATAQ.RASQ FL500 1500C
TELAR ATAQ.RASQ FL500 2000A
TELAR ATAQ.RASQ FL500 2000C
TELAR ATAQ.RASQ FL500 2500A
TELAR ATAQ.RASQ FL500 3000A
TELAR ATAQ.RASQ FL500 3500A
TELAR ATAQ.RASQ FL500 4000A
TELAR ATAQ.RASQ FL500 4500A
VIGA 1500C
VIGA 2000A
VIGA 2000C
VIGA 2500A
VIGA 3000A
VIGA 3500A
VIGA 4000A
VIGA 4500A
ROTOR DE RULO A BRIDE 1800A
ROTOR DE RULO A BRIDE 2000A
ROTOR DE RULO A BRIDE 2000C
ROTOR DE RULO A BRIDE 2500A
ROTOR DE RULO A BRIDE 3000A
ROTOR DE RULO A BRIDE 3500A
ROTOR DE RULO A BRIDE 4000A
ENGRAS. DE ESFERAS M6X1 7663-A
JUNTA
BRIDA EXTERIOR
VIROLA AUTOBL.
COJINETE D45 D100
ANILLO REFUERZO
BRIDA INTERIOR
cod. F07010546
33
TAV. GM01
34
cod. F07010546
TAV. GM01
Pos.
Cod.
Descrizione
1
2
3
4
5
6
7
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
M43400701
F01480123
F01010288
F01010291
M43400468
F01010341
M43400700
M23400493
F01010082
F01410088
F01220070
F01220059
F01220034
F01410064
M23400956
F01060208
M23400494
M23400495
F01220033
F01010319
F20110730
F01230085
F20110800
M23425979
M23430979
M23435979
M23440979
M23445979
M43425457
M43430457
M43435457
M43440457
M43445457
M23425709
M23430709
M23435709
M23440709
M23445709
F01100011
M43400705
M23400436
F02010034
F04010225
M61100441
M23400435
M43425629
M43430629
M43435629
M43440629
M43445629
M23400775
M23400776
FIANCATA RULLO GRANDE
ROS.G 12,5X22,9X 4 EX.C70 ZN
VITE M12X1,25X35 U5740 8.8 ZN
VITE M12X1,25X40 U5740 8.8 ZN
COMP.SUPP.CUSC.OSCIL.H60 X RIC
VITE M16X1,5 X45 U5740 8.8 ZN
FIANCATA RULLO PICCOLA
PIASTRA DI COLLEG.PICCOLA
VITE M14X1,5 X50 U5738 8.8 ZN
ROS.M14 15X 28X2,5 U6592 ZN
DADO M16X 1,5 D980 8 ZN
DADO M14X 1,5 D980 8 ZN
DADO M10X1,25 D980 8 ZN
ROS.M10 10,5X 20X 2 U6592 ZN
PIASTRINA RASCHIATERRA PER GM
VITE M10X1,5X25 U5731*8.8 ZN
PIATTO DI REGOLAZIONE
PIASTRA PER TRAVE
DADO M10X 1,5 D980 8 ZN
VITE M14X1,5 X45 U5740 8.8 ZN
CAV.Q.M10X 1,5X 30 91X 99 ZN
DADO M16X 2 D982 8 ZN
CAV.Q.M16X 2X 40 118X135 ZN
TRAVE POST. RULLO GM 2500A
TRAVE POST. RULLO GM 3000A
TRAVE POST. RULLO GM 3500A
TRAVE POST. RULLO GM 4000A
TRAVE POST. RULLO GM 4500A
TRAVE ANTERIORE RULLO 2500A
TRAVE ANTERIORE RULLO 3000A
TRAVE ANTERIORE RULLO 3500A
TRAVE ANTERIORE RULLO 4000A
TRAVE ANTERIORE RULLO 4500A
ROT.RUL.GM.600 2500A LIGHT 01
ROT.RUL.GM.600 3000A LIGHT 01
ROT.RUL.GM.600 3500A LIGHT 01
ROT.RUL.GM.600 4000A LIGHT 01
ROT.RUL.GM.600 4500A LIGHT 01
ING.M 6X1 7663-A 9SMNPB28 ZN
GUARNIZIONE METALLICA H60
FLANGIA ESTERNA SUP.CUSC.OSC.
GHIERA AU.GUK M40X1,5 T.4H ZN
CUSC.D45 D100 B25 1726309-2RS1
ANELLO T. 52X 90X 6 SPEC.
MOZZO CUSCINETTO OSCILL.H60
ROTORE RULLO GM.500 2500A
ROTORE RULLO GM.500 3000A
ROTORE RULLO GM.500 3500A
ROTORE RULLO GM.500 4000A
ROTORE RULLO GM.500 4500A
GRUPPO COLLEGAMENTO RIF.TRAVE
GRUPPO COLLEGAMENTO RIF.TRAVE
cod. F07010546
Description
ROLLER SIDE PANEL BIG
WASHER M12 ZGP EXTRA P.
SCREW M12X1,25X35 U5740 8.8 ZN
SCREW M12X1,25X40 U5740 8.8 ZN
BEARING OSCILLATING H.60 S.PAR
BOLT M16X1,5 X45 U5740 8.8 ZB
ROLLER SIDE PANEL SMALL
BLADE
BOLT M 14X1,5X50
WAS.M14 15X 28X2,5 U6592 ZB
NUT M16X 1,5 D980 8 ZB
NUT M14X 1,5 D980 8 ZB
NUT M10X1,25 D980 8 ZB
WASHER M10 10,5X20X2 U6592 ZN
SCRATCHING PLATE GM
BOLT M10X1,5X25
ADJUSTER PLATE
BLADE
NUT M10X 1,5 D980 8 ZN
BOLT M14X 1,5X 45 U5740 8.8 ZB
STRIKER M10X 1,5X 30 91X 99 ZB
NUT M16X 2 D982 8 ZN
U BOLT M16X 2X 40 118X135 ZN
SOIL SCRAPER FRAME 2500
SOIL SCRAPER FRAME 3000
SOIL SCRAPER FRAME 3500
SOIL SCRAPER FRAME 4000
SOIL SCRAPER FRAME 4500A
BEAM 2500A
BEAM 3000A
BEAM 3500A
BEAM 4000A
BEAM 4500A
RUBBER ROLLER ROTOR 2500A
RUBBER ROLLER ROTOR 3000A
RUBBER ROLLER ROTOR 3500A
RUBBER ROLLER ROTOR 4000A
RUBBER ROLLER ROTOR 4500A
GREASE NIPPLE M6X1 7663-A ZN
METALIC GASKET H60
OUTER FLANGE
SELF LOCKING NUT
BEARING D45 D100 B25 1726309-2
STIFFENER RING
INNER FLANGE
RUBBER ROLLER ROTOR GM500 2500
RUBBER ROLLER ROTOR GM500 3000
RUBBER ROLLER ROTOR GM500 3500
RUBBER ROLLER ROTOR GM500 4000
RUBBER ROLLER ROTOR GM500 4500
BEAM LINK ASSEMBLY
BEAM LINK ASSEMBLY
Description
Benennung
Descripcion
COTE ROULEAU GAUCHE GRAND
RONDELLE M12 ZGP EXTRA P.
VIS M12X1,25X35 U5740 8.8 ZN
VIS M12X1,25X40 U5740 8.8 ZN
ROULEMENT OSCILLANT H.60 P.DET
VIS M16X1,5 X45 U5740 8.8 ZB
COTE ROULEAU GAUCHE PETIT
LAME
VIS M 14X1,5X50
RON.M14 15X 28X2,5 U6592 ZB
ECRO.M16X 1,5 D980 8 ZB
ECROU M14X 1,5 D980 8 ZB
ECRO.M10X1,25 D980 8 ZB
RONDELL.M10 10,5X20X2 U6592 ZN
PLAT DU DECROTTOIR GM
VIS M10X1,5X25
PLAQUETTE DE REGISTRE
LAME
ECROU M10X 1,5 D980 8 ZN
VIS M14X1,5 X45 U5740 8.8 ZB
BUTEE M10X 1,5X 30 91X 99 ZB
ECROU M16X 2 D982 8 ZN
ATTEL.M16X 2X 40 118X135 ZB
CHASSIS ATT. DECROTTOIR 2500
CHASSIS ATT. DECROTTOIR 3000
CHASSIS ATT. DECROTTOIR 3500
CHASSIS ATT. DECROTTOIR 4000
CHASSIS ATT. DECROTTOIR 4500A
POUTRE 2500A
POUTRE 3000A
POUTRE 3500A
POUTRE 4000A
POUTRE 4500A
ROTOR ROULEAU CAOUTCH.2500A
ROTOR ROULEAU CAOUTCH.3000A
ROTOR ROULEAU CAOUTCH.3500A
ROTOR ROULEAU CAOUTCH.4000A
ROTOR ROULEAU CAOUTCH.4500A
GRAISS. A BILLE M6X1 7663A ZN
JOINT
FLASQUE EXTERIEUR
COLLIER AUTOBL.
ROULEMENT D45 D100
ANNEAU DE RENFORCEMENT
FLASQUE INTERIEUR
ROULEAU CAOUTCHOUT GM500 2500A
ROULEAU CAOUTCHOUT GM500 3000A
ROULEAU CAOUTCHOUT GM500 3500A
ROULEAU CAOUTCHOUT GM500 4000A
ROULEAU CAOUTCHOUT GM500 4500A
GROUPE DE CONNEXION
GROUPE DE CONNEXION
WALZENSEITENWAND GROSS
UNTERLEGSCHEIBE M12 ZGP EXTRA
SCHR.M12X1,25X35 U5740 8.8 ZN
SCHR.M12X1,25X40 U5740 8.8 ZN
LAGER SCHWINGEND H.60 ERSATZT.
SCHR.M16X1,5 X45 U5740 8.8 ZB
WALZENSEITENWAND KLEIN
MESSER
SCHRAUBE M 14X1,5X50
SCH.M14 15X 28X2,5 U6592 ZB
MUTT.M16X 1,5 D980 8 ZB
MUTTER M14X 1,5 D980 8 ZB
MUTT.M10X1,25 D980 8 ZB
SCHEIBE M10 10,5X20X2 U6592 ZN
ABSTREIFER PLATTE GM
SCHRAUBE M10X1,5X25
REGULIERUNGSPLATTE
MESSER
MUTTER M10X 1,5 D980 8 ZN
SCH. M14X1,5 X45 U5740 8.8 ZB
ANSCHLAG M10X 1,5X 30 91X 99
MUTTER M16X 2 D982 8 ZN
VERBI.M16X 2X 40 118X135 ZB
ABSTREIFERRAHMEN 2500
ABSTREIFERRAHMEN 3000
ABSTREIFERRAHMEN 3500
ABSTREIFERRAHMEN 4000
ABSTREIFERRAHMEN 4500A
HAUPTTRAEGER 2500A
HAUPTTRAEGER 3000A
HAUPTTRAEGER 3500A
HAUPTTRAEGER 4000A
HAUPTTRAEGER 4500A
GUMM.WALZEROTOR 2500A
GUMM.WALZEROTOR 3000A
GUMM.WALZEROTOR 3500A
GUMM.WALZEROTOR 4000A
GUMM.WALZEROTOR 4500A
SCHMIERBUECHE M6X1 7663-A ZN
DICHTUNG
AUSSENFLANSCH
SELBSTSP. NUTMUTTER
LAGER D45 D100 B25 1726309-2RS
RING
INNENFLANSCH
GUMMWALZERROTOR GM500 2500A
GUMMWALZERROTOR GM500 3000A
GUMMWALZERROTOR GM500 3500A
GUMMWALZERROTOR GM500 4000A
GUMMWALZERROTOR GM500 4500A
VERBINDUNG SATZ
VERBINDUNG SATZ
FLANCO RODILLO GRANDE
ARANDELA M12 ZGP EXTRA P.
TORN.M12X1,25X35 U5740 8.8 ZN
TORN. M12X1,25X40 U5740 8.8 ZN
COJINETE OSCILANTE H.60 P.REP.
TORN.M16X1,5 X45 U5740 8.8 ZB
FLANCO RODILLO PEQUEÑA
CUCHILLA
TORNILLO M 14X1,5X50
ARA.M14 15X 28X2,5 U6592 ZB
TUER.M16X 1,5 D980 8 ZB
TUERCA M14X 1,5 D980 8 ZB
TUER.M10X1,25 D980 8 ZB
ARAND. M10 10,5X20X2 U6592 ZN
PLACA RASQUETA GM
TORNILLO M10X1,5X25
PLAQUITA REGISTRO
CUCHILLA
TUERCA M10X 1,5 D980 8 ZN
TORNILLO M14X1,5 X45 U5740 8.8
EL. DE EMPALME M10X 1,5X 30
TUERCA M16X 2 D982 8 ZN
PERNO M16X 2X 40 118X135 ZB
TELAR ATAQUE RASQUETA 2500
TELAR ATAQUE RASQUETA 3000
TELAR ATAQUE RASQUETA 3500
TELAR ATAQUE RASQUETA 4000
TELAR ATAQUE RASQUETA 4500A
VIGA 2500A
VIGA 3000A
VIGA 3500A
VIGA 4000A
VIGA 4500A
ROTOR RODILLO ENGOMADO 2500A
ROTOR RODILLO ENGOMADO 3000A
ROTOR RODILLO ENGOMADO 3500A
ROTOR RODILLO ENGOMADO 4000A
ROTOR RODILLO ENGOMADO 4500A
ENGRAS. DE ESFERAS M6X1 7663-A
JUNTA
BRIDA EXTERIOR
VIROLA AUTOBL.
COJINETE D45 D100
ANILLO REFUERZO
BRIDA INTERIOR
ROT.RODIL.DE GOMMA GM500 2500A
ROT.RODIL.DE GOMMA GM500 3000A
ROT.RODIL.DE GOMMA GM500 3500A
ROT.RODIL.DE GOMMA GM500 4000A
ROT.RODIL.DE GOMMA GM500 4500A
GRUPO DE CONEXION
GRUPO DE CONEXION
35
USATE SEMPRE RICAMBI ORIGINALI
ALWAYS USE ORIGINAL SPARE PARTS
IMMER DIE ORIGINAL-ERSATZTEILE VERWENDEN
EMPLOYEZ TOUJOURS LES PIECES DE RECHANGE ORIGINALES
UTILIZAR SIEMPRE REPUESTOS ORIGINALES
UTILIZAŢI ÎNTOTDEAUNA PIESE DE SCHIMB ORIGINALE
*F07010546*
MASCHIO GASPARDO SpA
Sede legale e stabilimento produttivo
Via Marcello, 73 - 35011 Campodarsego (Padova) - Italy
Tel. +39 049 9289810
Fax +39 049 9289900
Email: [email protected]
www.maschionet.com
MASCHIO DEUTSCHLAND
GMBH
Äußere Nürmberger Straße 5
D - 91177 Thalmässing ng
Deutschland
Tel. +49 (0) 9173 79000
Fax +49 (0) 9173 790079
MASCHIO FRANCE Sarl
1 rue Denis Papin
45240 La Ferte Saint Aubin
France
Tel. +33 (0) 2.38.64.12.12
Fax +33 (0) 2.38.64.66.79
MASCHIO IBERICA S.L.
Calle Cabernet, 10
Poligono Industrial Clot de Moja
Olerdola - 08734 Barcelona
Tel. +34 93.81.99.058
Fax +34 93.81.99.059
MASCHIO-GASPARDO USA Inc
120 North Scott Park Road
Eldridge, IA 52748 - USA
Ph. +1 563 2859937
Fax +1 563 2859938
e-mail: [email protected]
MASCHIO GASPARDO SpA
Stabilimento produttivo
Via Mussons, 7 - 33075
Morsano al Tagliamento (PN) - Italy
Tel. +39 0434 695410
Fax +39 0434 695425
Email: [email protected]
ООО МАCKИО-ГАCПАРДО РУCCИЯ
404126, Россия, Волгоградская
область,
г.Волжский, ул.Пущкина, 117 *б*.
Тел.: +78443525065
факс: +78443525064
e-mail: [email protected]
http://www.maschionet.com
MASCHIO GASPARDO ROMANIA SRL
Strada Înfrăţirii, Nr. 155
315100 Chişineu - Criş
Tel. +40 257 30 70 30
Fax +40 257 30 70 40
e-mail: [email protected]
http://www.maschio.com
MASCHIO MIDDLE EAST
P.O. Box 922388
Amman, 11192 Jordan
Tel. 962 605511384
Fax 962 6 5538398
e-mail: [email protected]
GASPARDO-MASCHIO TURCHIA
MASCHIO-GASPARDO CANADA Inc
MASCHIO-GASPARDO CINA
MASCHIO-GASPARDO POLAND
MASCHIO-GASPARDO UCRAINA
GASPARDO BIELORUSSIA
MASCHIO-GASPARDO KOREA
Dep. Publishing MASCHIO - GASPARDO S.p.A