IBM Connections 5.6 install on Linux RedHat version 7.2

by user

on 15 сентября 2016

Category: Documents

>> Downloads: 7

views

Report

Comments

Description

Download IBM Connections 5.6 install on Linux RedHat version 7.2

Transcript

IBM Connections 5.6 install on Linux RedHat version 7.2

IBM Connections 5.6 install on
Linux RedHat version 7.2
IBM Connections 5.6 install on Linux RedHat version 7.2 ................................................ 1
1. Software Needed ......................................................................................................... 2
1.1. Post Install Fixes .................................................................................................. 3
2. Prepare Linux for Connections Install ........................................................................ 5
2.1. Install Linux Libraries .......................................................................................... 5
2.2. Install Korn shell for CCM install ........................................................................ 6
2.3. Configure the Linux system ................................................................................. 7
2.4. Extract Install files on the system ........................................................................ 9
3. Install WebSphere 8.5.5.7 ......................................................................................... 10
3.1. Install IBM Install Manager ............................................................................... 10
3.2. Install WebSphere 8.0.0.6 and ifixes.................................................................. 15
3.3. Create the WebSphere Application Server cell .................................................. 25
4. Enable security with LDAP ...................................................................................... 34
4.1. Start the DMGR and nodeagent ......................................................................... 34
4.2. Enable security with an LDAP Directory .......................................................... 34
5. Install DB2 10.5 ........................................................................................................ 43
5.1. Install DB2 10.1 Enterprise Server .................................................................... 43
5.2. Start DB2 ............................................................................................................ 51
5.3. Install DB2 10.5 fp7 ........................................................................................... 51
6. Create the Connections Databases ............................................................................ 52
6.1. Create the dedicated db2 user............................................................................. 52
6.2. Configure unicode for db2 ................................................................................. 52
6.3. Create Connections databases with wizard ........................................................ 53
7. Install and Tivoli Directory Integrator 7.1.1 fp3....................................................... 57
7.1. Install Tivoli Directory Integrator 7.1.1 ............................................................. 57
7.2. Install fixpack 3 .................................................................................................. 64
7.3. Configure TDI .................................................................................................... 65
8. Populate the profiles database using wizard ............................................................. 66
8.1. Copy tdisol directory to keep profiles and ldap in sync ..................................... 71
9. Install and Configure IBM HTTP Server and Plug-in 8.5.5.7 .................................. 71
9.1. Install IBM HTTP Server 8.5.5.7 ....................................................................... 72
9.2. Configure Plug-In with WebSphere Customization toolbox ............................. 83
10. Configure SSL on IHS ........................................................................................... 93
10.1.
Create the SSL key file for IHS ...................................................................... 94
10.2.
Configure httpd.conf to listen over ssl............................................................ 96
10.3.
Add the HTTP Server certificate to WebSphere trust store ........................... 97
11. Install IBM Connections 5.5 ................................................................................ 101
11.1.
Configure HTTP Server plugin with Connections ....................................... 122
11.2.
Start IBM Connections ................................................................................. 124
12. Additional HTTP Server config settings.............................................................. 125
12.1.
Configure HTTP Server to compress some files .......................................... 125
12.2.
Configure Files and Wikis to download files ............................................... 126
12.3.
Configure Connections to use IHS to upload files ....................................... 126
13. Configure IBM Connections Content Manager Libraries ................................... 126
13.1.
Create Filenet Global Configuration Domain (GCD) .................................. 126
13.2.
Create FileNet ObjectStore ........................................................................... 128
14. Apply Connections 5.5 Recommended Day1 fixes ............................................. 129
14.1.
Install the Day1 ifixes ................................................................................... 129
Appendix - helpful linux stuff......................................................................................... 135
15. Redirecting Display from unix to local windows machine .................................. 135
16. Disable password settings on the OS ................................................................... 137
17. Configure DB2 to start automatically after system restart................................... 137
18. Configure IBM HTTP Server to start automatically............................................ 139
1.
Software Needed
I downloaded the following files prior to installing:
I downloaded the following files prior to installing:
The following document has more details: http://www01.ibm.com/support/docview.wss?uid=swg24041291
IBM Connections V5.5 for IBM Connections Suite V5.5 Multiplatform Multilingual
eAssembly (CRY8MML)
 IBM Connections V5.5 for Linux Multilingual (CN80AML)
 IBM Connections V5.5 Wizard for Linux, AIX Multilingual (CN80EML )
NOTE: DO NOT download the wizard directory from the eAssembly, use the
one from the day 1 fixes instead
http://www933.ibm.com/support/fixcentral/swg/selectFixes?parent=Collaboration%2BSo
lutions&product=ibm/Lotus/Lotus+Connections&release=5.5.0.0&platform=
All&function=all

IBM DB2 Server 10.5 for Linux® on AMD64 and Intel® EM64T systems
(x64) (CIXV0ML)

IBM Tivoli Directory Integrator Identity Edition V7.1.1 for Linux - x86-64,
Multilingual (CZUF3ML )

IBM WebSphere Application Server Network Deployment V8.5.5 (1 of 3) for
Multiplatform Multilingual (CIK2HML )
IBM WebSphere Application Server Network Deployment V8.5.5 (2 of 3) for
Multiplatform Multilingual (CIK2IML )
IBM WebSphere Application Server Network Deployment V8.5.5 (3 of 3) for
Multiplatform Multilingual (CIK2JML )





IBM WebSphere Application Server V8.5.5 Supplements (1 of 3) for
Multiplatform Multilingual (CIK1VML )
IBM WebSphere Application Server V8.5.5 Supplements (2 of 3) for
Multiplatform Multilingual (CIK1WML )
IBM WebSphere Application Server V8.5.5 Supplements (3 of 3) for
Multiplatform Multilingual (CIK1XML )
IBM Connections Content Manager V5.5 for IBM Connections Suite V5.5 Multiplatform
Multilingual eAssembly (CRY8NML)
 IBM FileNet Content Engine V5.2.1 Linux Multilingual (CN214ML )
 IBM FileNet Content Engine Client V5.2.1 Linux English (CN223EN )
IBM Content Navigator V2.0.3 for IBM Connections Enterprise Content Edition (CECE)
V5.2 Multiplatform Multilingual eAssembly (CRVX7ML)
 IBM Content Navigator V2.0.3 Linux Multilingual (CN0PTML )
1.1. Post Install Fixes
NOTE: These are what I downloaded on 12 January 2016. Check the following location
for the latest supported releases:
http://www-01.ibm.com/support/docview.wss?uid=swg27047297
IBM Connections Day 1 fixes:
http://www933.ibm.com/support/fixcentral/swg/selectFixes?parent=Collaboration%2BSoluti
ons&product=ibm/Lotus/Lotus+Connections&release=5.5.0.0&platform=All&fu
nction=all






interim fix: 5.5.0.0-IC-Multi-IFLO87330
interim fix: 5.5.0.0-IC-News-IFLO87487
interim fix: 5.5.0.0-IC-Common-IFLO87469
interim fix: 5.5.0.0-IC-D1-DBwizard-LO87408-AIX-Lin
refresh pack: 5.5.0.0-IC-Multi-UPDI-20151224
5.5.0.0-TypeAhead-20151218
Optional components in Day 1 fixes not used in this part of the install


interim fix: 5.5.0.0-IC-D1-CognosWizard-LO87407-Linux
refresh pack: 5.5.0.0-IC-D1-MigTool
WebSphere Application Server, IBM HTTP Server and plug-ins 8.5.5 fixpack 7 http://www-01.ibm.com/support/docview.wss?uid=swg24040533
TDI 7.1.1 - fixpack 3: http://www-01.ibm.com/support/docview.wss?uid=swg27010509
NOTE: The fix central link on this page did not work for me, so I used
http://www.ibm.com/support/fixcentral/swg/quickorder?product=ibm/Tiv
oli/Tivoli+Directory+Integrator&release=7.1.1&function=fixId&fixids=7.
1.1-TIV-TDIFP0003&includeRequisites=1&includeSupersedes=0&downloadMethod=
ddp&source=fc
DB2 10.6 - Fixpack 7: http://www-01.ibm.com/support/docview.wss?uid=swg27007053
DB2 Universal Fix Pack
FileNet Components
FileNet Content Engine 5.2.1 FP2 and Content Engine Client 5.2.1 FP2 http://www.ibm.com/support/fixcentral/swg/quickorder?parent=FileNet%
2BProduct%2BFamily&product=ibm/Information+Management/FileNet+
Content+Engine&release=5.2.1.2&platform=All&function=all&useReleas
eAsTarget=true&source=fc

fix pack: 5.2.1.2-P8CPE-LINUX-FP002

fix pack: 5.2.1.2-P8CPE-CLIENT-LINUX-FP002
IBM Content Navigator 2.0.3 FP5 http://www.ibm.com/support/fixcentral/swg/quickorder?parent=Enterprise
%2BContent%2BManagement&product=ibm/Other+software/Content+N
avigator&release=2.0.3&platform=All&function=all&source=fc
Make sure to get the 2.0.3-ICN fixpack for your OS:
fix pack: 2.0.3-ICN-FP005-LINUX
These were the steps I followed to install IBM Connections 5.5. Everything was installed
on a single server. The server is Red Hat Enterprise Linux 7.2
2.
Prepare Linux for Connections Install
There are a number of libraries and OS settings that need to be in place for the
Connections install. This topic walks you thru those details
2.1. Install Linux Libraries
The documentation states the following libraries must be installed if you want to use gui
mode of the installers.
compat-libstdc++-33.x86_64
libcanberra-gtk2.i686
PackageKit-gtk-module
gtk2.i686
compat-libstdc++-33.i686
compat-libstdc++-296
compat-libstdc++
libXtst.i686
libpam.so.0
I was not able to install all the libraries, and only installed the following:
[root@cpdocs2 ic55]# yum list compat-libstdc++-33 libcanberra-gtk2 PackageKitgtk-module gtk2 compat-libstdc++-296 compat-libstdc++ libXtst libpam.so.0
Loaded plugins: fastestmirror, langpacks, product-id, rhnplugin, search-disabled-repos,
subscription-manager
This system is receiving updates from RHN Classic or Red Hat Satellite.
Loading mirror speeds from cached hostfile
Installed Packages
compat-libstdc++-33.i686
3.2.3-72.el7
compat-libstdc++-33.x86_64
3.2.3-72.el7
gtk2.i686
2.24.28-8.el7
gtk2.x86_64
2.24.28-8.el7
libXtst.i686
1.2.2-2.1.el7
libXtst.x86_64
1.2.2-2.1.el7
libcanberra-gtk2.x86_64
0.30-5.el7
If you are missing any of the libraries I had
compat-libstdc++-33
gtk2
libXtst
libcanberra-gtk2
Run the command yum install component. For example if you are missing gtk2, either
the i686 or x86_64 run
yum install gtk2
to install that library.
2.2. Install Korn shell for CCM install
The install scripts for CCM require the Korn shell. If you miss this step the install will
fail with error: CLFRP0038E IBM Connections Content Manager failed to be configured
on WebSphere Application Server. Error Step Step "action-config-fncs-ccm"
In the
/opt/IBM/WebSphere/AppServer/profiles/Dmgr01/ConfigEngine/log/ConfigTrace.log
you will see:
/opt/IBM/Connections/ccm/ccm/ccm/config/includes/ccm_cust_cfg.xml:817: Execute
failed: java.io.IOException: Cannot run program "./configwizard.sh" (in directory
"/opt/IBM/Connections/addons/ccm/FNCS/configmanager"): java.io.IOException:
error=2, No such file or directory
If this happens, uninstall CCM using Install Manager, install the Korn shell from these
steps, and install CCM again with Install Manager.
1. From the redhat install packages dir and run
yum install ksh
2.3. Configure the Linux system
1. As the root user, run the following command to create a symbolic link (this is needed
for the IBM HTTP Server)
ln -s /bin/ksh /usr/bin/ksh
2. Disable SELinux by setting SELINUX=disabled in /etc/selinux/config
3. Add multilib_policy=all to /etc/yum.conf
4. Configure the ulimit to 65536 (we could use 8192 if this was only Connections, but
DB2 needs 65536):
cd ~
umask 022
vi .bashrc
add ulimit -n 8192 and save and close the file
5. Update the current working session as well, by running:
ulimit -n 65536
Then run ulimit -a to confirm the task worked
Also, ensure data and file size are unlimited
Note: My ulimit -u is set to 47273. I believe our systems in IBM are set that way
because we have DB2 on the same system. I think the default is 1024, and working with
a few customers this needed to be increased to 4096 on a medium deployment.
2.4. Extract Install files on the system
I ran the following commands to uncompress all files into a install dir
WebSphere and fixes
1. unzip WASND_v8.5.5_1of3.zip -d was
2. unzip WASND_v8.5.5_2of3.zip -d was
3. unzip WASND_v8.5.5_3of3.zip -d was
4. unzip WAS_V8.5.5_SUPPL_1_OF_3.zip -d wassupp
5. unzip WAS_V8.5.5_SUPPL_2_OF_3.zip -d wassupp
6. unzip WAS_V8.5.5_SUPPL_3_OF_3.zip -d wassupp
7. unzip 8.5.5-WS-WAS-FP0000007-part1.zip -d was/fp7
8. unzip 8.5.5-WS-WAS-FP0000007-part2.zip -d was/fp7
9. unzip 8.5.5-WS-WASSupplements-FP0000007-part1.zip -d wassupp/fp7
10. unzip 8.5.5-WS-WASSupplements-FP0000007-part2.zip -d wassupp/fp7
Connections and Cognos wizard
11. tar -C ic55 -xvf 5.5.0.0-IC-D1-CognosWizard-LO87407-Linux.tar
12. tar -C ic55 -xvf 5.5.0.0-IC-D1-DBWizard-LO87408_lin_aix.tar
13. tar -C ic55 -xvf IBM_Connections_5.5_lin.tar
DB2 and fixes
14. tar -C db2 -zxvf DB2_Svr_10.5.0.3_Linux_x86-64.tar.gz
15. tar -C db2/fp7 -zxvf v10.5fp7_linuxx64_universal_fixpack.tar.gz
TDI and fixes
16. tar -C tdi -xvf TDI_IDENTITY_E_V7.1.1_LIN-X86-64.tar
17. unzip 7.1.1-TIV-TDI-FP0003.zip -d tdi/fp3
FileNet / CCM - These all need to be extracted to the same directory
18. tar -C filenet -zxvf FN_CE_5.2.1_LINUX_ML.tar.gz
19. tar -C filenet -zxvf FN_CEC_5.2.1_LINUX_EN.tar.gz
20. tar -C filenet -xvf IBM_CTNT_NAVI_2.0.3_LNX_ML.tar
21. tar -C filenet -zxvf 5.2.1.2-P8CPE-LINUX-FP002.tar.gz
22. tar -C filenet -zxvf 5.2.1.2-P8CPE-CLIENT-LINUX-FP002.tar.gz
23. tar -C filenet -xvf 2.0.3-ICN-FP005-LINUX.tar
3.
Install WebSphere 8.5.5.7
This step involves setting up a DMGR server, 1 managed node (in this case I installed
everything on 1 system, so I installed a cell).
3.1. Install IBM Install Manager
Follow appendix A to export the display to your workstation
1. run ./install from the /opt/install/ic55/ic55/IBM_Connections_Install/IM/linux
directory
2.
3.
4.
5.
6.
7. Click Cancel
3.2. Install WebSphere 8.0.0.6 and ifixes
First, make sure you have extracted WebSphere 8.5.5, 8.5.5 fp7 into a directory, I used
/opt/install/was and /opt/install/was/
NOTE: for detailed steps on exporting the display to your laptop see Appendix A
1. Start IBM Install Manager by running ./IBMIM from
/opt/IBM/InstallationManager/eclipse/
2. File Preferences .... to add the WebSphere repository to IBM Install Manager
3. Select Add Repository
4. Browse to the location of where you extracted WebSphere and select the
repository.config (/opt/install/ic55/was/repository.config) and click OK
5. Continue that process for fp7
/opt/install/was/fp7/repository.config
And uncheck the Search service repositories during installation and updates box, then
click Apply and OK
6.
7.
8.
9.
10.
11.
12.
13.
3.3. Create the WebSphere Application Server cell
Now that the install is complete we will create a cell because all services are installed on
a single machine.
14. Start the Profile Management Tool
15.
16. Because everything is being installed on a single machine, I will chose Cell,
otherwise I would install WebSphere on 2 machine, choosing Management on 1 and
Application server on the other.
17.
18. The user you select here will be created in the local file repository in WebSphere.
This user should NOT be in your LDAP directory. I like to use localadmin to remind
myself and everything that this user is in the local repository, typically people use
wasadmin, but sometimes they have a wasadmin in their ldap directory and that will
cause problems.
19.
20.
21.
22.
WebSphere Application Server is now installed on the machine
4.
Enable security with LDAP
In this process we will start WAS and enable security
4.1. Start the DMGR and nodeagent
1. Start the DMGR by running:
/opt/IBM/WebSphere/AppServer/profiles/Dmgr01/bin/startManager.sh
2. Start the nodeagent by running
/opt/IBM/WebSphere/AppServer/profiles/AppSrv01/bin/startNode.sh
4.2. Enable security with an LDAP Directory
1. Open a browser to the DMGR Integrated Solutions Console
(http://cpdocs2.swg.usma.ibm.com:9060/ibm/console) Because security is enabled,
you will be redirected to the ssl port to login - if necessary accept the certificate and
login with the user created during the WebSphere Application Server install
2. Open Security – Global Security
3. Select Federated Repositories from the Available realm definitions field, and then
click Configure.
4. Click Add Base entry to Realm
5. and then, on the Repository reference page, click Add Repository - LDAP repository
6. On the New page, type a repository identifier, such as myFavoriteRepository (I used
icldap AD into the Repository identifier field.
7. Specify the LDAP directory that you are using in the Directory type field.
8. Type the host name of the primary LDAP directory server in the Primary host name
field. The host name is either an IP address or a domain name service (DNS) name.
9. If your directory does not allow LDAP attributes to be searched anonymously,
provide values for the Bind distinguished name and Bind password fields.
10. Specify the login attribute or attributes that you want to use for authentication in the
Login properties field. Separate multiple attributes with a semicolon. For example:
uid;mail.
11. Click Apply
12. and then Save
13. Set the base entry fields, and click OK
NOTE: If this was Domino LDAP, set the first entry to root, and leave the second
blank. 'root' is a special setting for WebSphere that tells it not to use a base. This will
allow domino customer to find the user in the primary directory and all secondary
directories, as well as all flat groups.
All other ldap directories, the entries to the base of your directory. My ldap directory
is IBM Directory Server, so I set the base to dc=ibm,dc=com
14. and then Save
15. In the Repository Identifier column, click the link for the repository or repositories
that you just added.
16. In the Additional Properties area, Select Group Federated repositories entity types to
LDAP object classes mapping.
17. Make sure Group and Person Account are set to group and user.
If this was Domino, they would be set to DominoGroup or DominoPerson
IBM Directory server is typically groupOfUniqueNames and inetOrgPerson
Active Directory is group and user
18. Back in the repositories page, select Group attribute definition
19. and then click the Member attributes link.
20. If you are using AD, member with object class group is the typical config.
If you are using Domino, member with object class dominoGroup or groupOfNames
is fine
If you are using IDS, make sure to include uniquemember with object class
groupOfUniqueNames
I am using IBM Directory Server, so I clicked on New, and entered uniquemember :
GroupOfUniqueNames
21. Click to go back to Group attribute definition
22. Back on the Group attribute definition page, Enter group membership values in the
Name of member attribute and Object class fields. Click Ok
For IBM Directory Server this would be ibm-allgroups with scope of Nested
For Domino this would be dominoAccessGroups with scope of Nested
For AD this would be memberof with scope of Direct
23. and then click Save to save this setting.
24. Enable Application security:
a. Click Global Security in the navigation links at the top of the page.
b. Select the Administrative Security and Application Security check boxes. Make
sure the Java 2 security check box is unchecked
c. Click Apply
d. and then click Save to save this configuration.
25. Log out of the WebSphere Application Server Integrated Solutions Console and
restart WebSphere Application Server
a. Run /opt/IBM/WebSphere/AppServer/profiles/Dmgr01/bin/stopManager.sh username localadmin -password password
b. Then /opt/IBM/WebSphere/AppServer/profiles/Dmgr01/bin/startManager.sh
26. Verify that users in the LDAP directory have been successfully added to the
repository:
a. From the WebSphere Application Server Integrated Solutions Console, select
Users and Groups > Manage Users.
b. In the Search by field, enter a user name that you know to be in the LDAP
directory and click Search. If the search succeeds the user exists in your ldap
directory.
c. Click on the user, then click the Groups tab, you should see a list of groups the
user belongs to
27. Once the DMGR is finding users correctly from LDAP, restart the nodeagent to pick
up the changes by running
a. /opt/IBM/WebSphere/AppServer/profiles/AppSrv01/bin /stopNode.sh -username
localadmin -password password
b. /opt/IBM/WebSphere/AppServer/profiles/AppSrv01/bin /startNode.sh
5.
Install DB2 10.5
In this step we will Install DB2.
Make sure you have extracted IBM DB2 Server 10.5 for Linux® on AMD64 and Intel®
EM64T systems (x64) (CIXV0ML). I extracted it to /opt/install/db2/
5.1. Install DB2 10.1 Enterprise Server
1. Follow Appendix A to export the display to your workstation
2. Run .db2setup from /opt/install/db2/server/
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
5.2. Start DB2
1. Access the system as db2inst1
2. run db2start
5.3. Install DB2 10.5 fp7
Make sure to extract DB2 10.5 fp7, I used /opt/install/db2/fp7
1. Sign into the system as the db2 admin (db2inst1) and run db2stop
2. Sign into the system as the DB2 Admin user (dasusr1) and run db2admin stop
3. As root Run ./installFixPack from /opt/install/db2/fp7/universal
4. Enter the path where DB2 is isntalled (/opt/IBM/db2/V10.1)
5.
6.
7. Start DB2 by logging into the system as the db2 admin (db2inst1) and running
db2start
6.
Create the Connections Databases
6.1. Create the dedicated db2 user
1. as the root user enter the following commands
a. useradd -g db2iadm1 lcuser
b. echo "lcuser:password" | chpasswd
6.2. Configure unicode for db2
1. access the machine as the db2 instance owner (db2inst1)
2. Run the following commands:
a. db2set DB2CODEPAGE=1208
b. db2stop force
c. db2start
3. To verify the setting took, run db2set, DB2CODEPAGE should be equal 1208
6.3. Create Connections databases with wizard
Make sure to extract interim fix: 5.5.0.0-IC-D1-DBwizard-LO87408-AIX-Lin to a
location on the DB2 Server. I extracted to /opt/install/ic55/ic55/Wizards
1. log on to the server as root
2. Make sure all users can execute the dbWizard.sh file
a. change dir to /opt/install/ic55/ic55
b. run ownership of the entire Wizards directory to the db2 instance owner by
running
chown -R db2inst1 Wizards
3. Grant display to all users by entering the following command
xhost +
4. change to the db2 instance owner (db2inst1) by entering
5. run the following commands to export the display to your laptop (see appendix A for
more details)
a. export DISPLAY=9.75.245.208:0
b. xclock
the clock should appear on your desktop
6. Run ./dbWizard.sh from /opt/install/ic55/ic55/Wizards
7.
8.
9.
10.
11.
12.
13. back in the ssh terminal, type exit to return to the root user
7.
Install and Tivoli Directory Integrator 7.1.1 fp3
In this step, we will install TDI 7.1.1 and apply fp3.
7.1. Install Tivoli Directory Integrator 7.1.1
Software needed for this step:
IBM Tivoli Directory Integrator Identity Edition V7.1.1 for Linux - x86-64, Multilingual
(CZUF3ML )
IBM Tivoli Directory Integrator Identity Edition V7.1.1 for Linux - x86-64, Multilingual
(CZUF3ML ) (I used /opt/install/ic55/tdi)
1. as root Run ./install_tdiv711_linux_x86_64.bin from /opt/install/tdi/linux_x86_64
NOTE: If you have not already configured the ssh system to send the display to your
laptop, use appendix A to do that.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13. Uncheck Start Configuration Editor
7.2. Install fixpack 3
Software needed for this step:
TDI 7.1.1 - fixpack 3: http://www-01.ibm.com/support/docview.wss?uid=swg27010509
Download and extract FP3 on the server. (I extracted to /opt/install/ic55/tdi/fp3)
1. The zip file you download extracts to a folder (7.1.1-TIV-TDI-FP0003) that contains
a zip file (TDI-7.1.1-FP0003.zip) and 3 other files. It's this TDI-7.1.1-FP0003.zip we
will point to in the next step.
2. Run ./applyUpdates.sh -update /opt/install/ic55/tdi/fp3/7.1.1-TIV-TDI-FP0003/TDI7.1.1-FP0003.zip from the from /opt/IBM/TDI/V7.1.1/bin/ directory
3. After the fix pack is installed, verify the Tivoli Directory Integrator fix pack version
installed on your system by running
/opt/IBM/TDI/V7.1.1/bin/applyUpdates.sh -queryreg
You should get the following results
Information from .registry file in: /opt/IBM/TDI/V7.1.1
Edition: Identity
Level: 7.1.1.3
License: None
Fixes Applied
=-=-=-=-=-=-=
TDI-7.1.1-FP0003(7.1.1.0)
Components Installed
=-=-=-=-=-=-=-=-=-=
BASE
SERVER
-TDI-7.1.1-FP0003
CE
-TDI-7.1.1-FP0003
JAVADOCS
-TDI-7.1.1-FP0003
EXAMPLES
EMBEDDED WEB PLATFORM
AMC
Deferred: false
7.3. Configure TDI
1. Copy the db2jcc.jar and db2jcc_license_cu.jar files from the java subdirectory of the
directory where you installed DB2 (/opt/IBM/db2/V10.5/java) to the jvm/jre/lib/ext
subdirectory of Tivoli Directory Integrator. (/opt/IBM/TDI/V7.1.1/jvm/jre/lib/ext)
2. Increase the runtime memory for TDI
a. Edit /opt/IBM/TDI/V7.1.1/ibmdisrv
b. At the bottom of the file look for
"$TDI_JAVA_PROGRAM" $TDI_MIXEDMODE_FLAG -cp
"$TDI_HOME_DIR/IDILoader.jar" "$LOG_4J"
com.ibm.di.loader.ServerLauncher "$@" &
change this to
"$TDI_JAVA_PROGRAM" -Xms256M -Xmx1024M
$TDI_MIXEDMODE_FLAG -cp "$TDI_HOME_DIR/IDILoader.jar"
"$LOG_4J" com.ibm.di.loader.ServerLauncher "$@" &
c. Save and close the file
8.
Populate the profiles database using wizard
NOTE: If you have not exported the display to run a gui on your local machine, use
appendix A to do that now.
1. Copy the Wizards directory from the IBM Connections installation media (interim fix:
5.5.0.0-IC-D1-DBwizard-LO87408-AIX-Lin) to the system where Tivoli Directory
Integrator is installed. Everything is on the same machine for my enviornment, so the
Wizard directory is in /opt/install/ic55/ic55/Wizards/
2. Run ./populateWizard.sh from /opt/install/ic55/ic55/Wizards/
3.
4.
5.
6.
7.
8.
9.
10.
11.
8.1. Copy tdisol directory to keep profiles and ldap in sync
1. create a tdisol dir in /opt/IBM/TDI/V7.1.1/
mkdir /opt/IBM/TDI/V7.1.1/tdisol
2. Copy the TDI directory from /opt/install/ic55/ic55/Wizards/TDIPopulation/linux to
/opt/IBM/TDI/V7.1/tdisol/
cp -ar /opt/install/ic55/ic55/Wizards/TDIPopulation/linux/TDI/
/opt/IBM/TDI/V7.1.1/tdisol/
3. This directory has the settings from when you populated the profiles database.
Periodically as users are added, removed or updated in ldap you need to run
the ./sync_all_dns.sh from this directory to keep the profiles database and ldap
directory in sync
9.
Install and Configure IBM HTTP Server and Plug-in 8.5.5.7
In this step we will Install IBM HTTP Server 8.5.7
Install the plugin for the HTTP Server
Apply fix pack IHS as well as the plugin
Configure IHS with the DMGR
Configure SSL on IHS
9.1. Install IBM HTTP Server 8.5.5.7
Software needed for this step:
IBM Connections V5.5 for IBM Connections Suite V5.5 Multiplatform Multilingual
eAssembly (CRY8MML)



IBM WebSphere Application Server V8.5.5 Supplements (1 of 3) for
Multiplatform Multilingual (CIK1VML )
IBM WebSphere Application Server V8.5.5 Supplements (2 of 3) for
Multiplatform Multilingual (CIK1WML )
IBM WebSphere Application Server V8.5.5 Supplements (3 of 3) for
Multiplatform Multilingual (CIK1XML )
IBM HTTP Server and plug-ins 8.5.5 fixpack 7 - http://www01.ibm.com/support/docview.wss?uid=swg24040533
Extract the IBM IBM WebSphere Application Server V8.5.5 Supplements and
Supplements Fix Pack 7 downloads in to a directory. I extracted to
/opt/install/ic55/wassupp and /opt/install/ic55/wassupp/fp7
1. Start IBM Install Manager by running ./IBMIM from
/opt/IBM/InstallationManager/eclipse
NOTE: If you have not already exported the display, follow Appendix A to export
the display
2. Go to File Preferences
3. Select the Supplements and Fix Pack7 repository
4.
5.
6. Select IBM HTTP Server, Web Server Plug-ins and the Customization Toolbox
7.
8.
9.
10.
11.
12.
13.
9.2. Configure Plug-In with WebSphere Customization toolbox
1. Create the create a runtime user for the admin server by running the following as root:
groupadd ihs
useradd -g ihs ihs
2. If the Web Server Plug-in Customization Toolbox is not running start it
running ./wct.sh from /opt/IBM/WebSphere/Toolbox/WCT
3.
4.
5.
6.
7.
8.
9.
10. Since I created the ihs user and group prior to installing IHS, I uncheck Create a new
unique system user
11.
12.
13. Select the AppServer profile (NOT Dmgr)
14.
15.
16.
17. copy configurewebserver1.sh from /opt/IBM/WebSphere/Plugins/bin/ to
/opt/IBM/WebSphere/AppServer/profiles/Dmgr01/bin/
cp /opt/IBM/WebSphere/Plugins/bin/configurewebserver1.sh
/opt/IBM/WebSphere/AppServer/profiles/Dmgr01/bin/configurewebserver1.sh
18. Change dir to /opt/IBM/WebSphere/AppServer/profiles/Dmgr01/bin/
and run
./configurewebserver1.sh -username localadmin -password password
19. At this point if you log into the IBM Integrated Solution Console, go to Servers Server Types - Web Servers, you should see the webserver1 that was just created
10. Configure SSL on IHS
When using connections, all communication between components occurs over SSL, also,
when you click login, we send the user to an ssl address, so you must configure SSL on
the IBM HTTP Server that will run in front of Connections.
Setting up SSL on the http server is a 3 step process.
Create the SSL key file for IHS
Configure httpd.conf to listen over ssl
Add the HTTP Server certificate to WebSphere trust store
10.1. Create the SSL key file for IHS
1. If you have not exported the display to your local machine, follow the steps in
Appendix A to do that now.
2. Start IBM Key Management Utility by going to /opt/IBM/HTTPServer/bin and
running ./ikeyman
3. Click New
4. Set Key database type to CMS
select a filename and location
NOTE: make sure all folders in the path are already created. I had to create the ssl
folder under /opt/IBM/HTTPServer
5. Set password and Stash the password to a file
6. While in Personal Certificates, click New Self-Signed…
7. Set the Key Label and Common name to the hostname of the IHS Server, and set
validity period to the length of time you want this certificate to be valid
8. Close the Key Management utility
10.2. Configure httpd.conf to listen over ssl
1. Open /opt/IBM/HTTPServer/conf/httpd.conf
2. Add the following lines just above the was_ap22_module module
LoadModule ibm_ssl_module modules/mod_ibm_ssl.so
<IfModule mod_ibm_ssl.c>
Listen 0.0.0.0:443
<VirtualHost *:443>
ServerName cpdocs2.swg.usma.ibm.com
#DocumentRoot /opt/IBM/HTTPServer/htdocs
SSLEnable
SSLProtocolDisable SSLv3 SSLv2
</VirtualHost>
</IfModule>
SSLDisable
Keyfile "/opt/IBM/HTTPServer/ssl/ihskey.kdb"
SSLStashFile "/opt/IBM/HTTPServer/ssl/ihskey.sth"
LoadModule was_ap22_module
/opt/IBM/WebSphere/Plugins/bin/64bits/mod_was_ap22_http.so
WebSpherePluginConfig……
3. Save and Close httpd.conf
4. Restart the IBM HTTP Server service by going to /opt/IBM/HTTPServer/bin/ and
running
./apachectl stop
./apachectl start
5. At this point you will be able to access https://cpdocs2.swg.usma.ibm.com, and get
the default index.html page
10.3. Add the HTTP Server certificate to WebSphere trust store
1. Open the WAS Admin console
(https://cpdocs2.swg.usma.ibm.com:9043/ibm/console/logon.jsp) and login
2. Open Secruity – SSL certificate and key management
Under Related Items, select Key stores and certificates
3. Click on CellDefaultTrustStore
4. Click on Signer Certificates
5. Click on Retrieve from port
6. Enter a host, port and alias of the HTTP Server and click Retrieve signer information
7. Click OK
8. Click Save
9. Close the Integrated Solutions Console
11. Install IBM Connections 5.5
Software needed for this step
IBM Connections V5.5 for IBM Connections Suite V5.5 Multiplatform Multilingual
eAssembly (CRY8MML)
 IBM Connections V5.5 for Linux Multilingual (CN80AML)
IBM Connections Content Manager V5.5 for IBM Connections Suite V5.5 Multiplatform
Multilingual eAssembly (CRY8NML)
 IBM FileNet Content Engine V5.2.1 Linux Multilingual (CN214ML )
 IBM FileNet Content Engine Client V5.2.1 Linux English (CN223EN )
IBM Content Navigator V2.0.3 for IBM Connections Enterprise Content Edition (CECE)
V5.2 Multiplatform Multilingual eAssembly (CRVX7ML)
 IBM Content Navigator V2.0.3 Linux Multilingual (CN0PTML )
FileNet Components

FileNet Content Engine 5.2.1 FP2 and Content Engine Client 5.2.1 FP2 http://www.ibm.com/support/fixcentral/swg/quickorder?parent=FileNet%2BProd
uct%2BFamily&product=ibm/Information+Management/FileNet+Content+Engin
e&release=5.2.1.2&platform=All&function=all&useReleaseAsTarget=true&sour
ce=fc

fix pack: 5.2.1.2-P8CPE-LINUX-FP002

fix pack: 5.2.1.2-P8CPE-CLIENT-LINUX-FP002
IBM Content Navigator 2.0.3 FP5 http://www.ibm.com/support/fixcentral/swg/quickorder?parent=Enterprise%2BC
ontent%2BManagement&product=ibm/Other+software/Content+Navigator&relea
se=2.0.3&platform=All&function=all&source=fc
Make sure to get the 2.0.3-ICN fixpack for your OS:
fix pack: 2.0.3-ICN-FP005-LINUX
Follow Appendix A to export the display to your desktop if you have not already done so.
NOTE: Before you start the install. If you installed WebSphere Application Server in a
non-English locale, you should review the following technote to ensure the FileNet
components will install correctly
http://www-01.ibm.com/support/docview.wss?uid=swg21968883
NOTE: Make sure to restart the DMGR and nodeagents just before starting the install.
1. Stop the nodeagent by running:
a. /opt/IBM/WebSphere/AppServer/profiles/AppSrv01/bin/stopNode.sh -username
localadmin -password password
2. Restart the DMGR by running
a. /opt/IBM/WebSphere/AppServer/profiles/Dmgr01/bin/stopManager.sh -username
localadmin -password password
b. /opt/IBM/WebSphere/AppServer/profiles/Dmgr01/bin/startManager.sh
3. Start the nodeagent by running:
a. /opt/IBM/WebSphere/AppServer/profiles/AppSrv01/bin/startNode.sh
4. Start IBM Install Manager by running ./IBMIM from
/opt/IBM/InstallationManager/eclipse/
5.
6. Browse to the location you extracted IBM Connections V5.5 for Linux Multilingual
(CN80AML)
/opt/install/ic55/ic55/IBM_Connections_Install/IBMConnections/repository.config in
my environment
7.
8.
9.
10.
11.
12. Scroll down and selected IBM Connections Content Manager
13.
14.
15.
16. The user fnanon is a system user in my LDAP directory that will only be used for
anonymous access to FileNet, once you enter that, scroll down to enter the location of
the FileNet files
17. Browse to the location you extracted the FileNet installers /opt/install/ic55/filenet in
my environment and click Validate
18.
19.
20. I decided to install a Medium deployment, so the Connections application are
installed over 4 different clusters.
AppsCluster - Activities, Blogs, Bookmarks, Files, Forums, Metrics, Mobile, Wikis
InfraCluster - Communities, News, Profiles, Search, Common, Widget Container
UtilCluster - Homepage, Moderation, Rich Text Editor
CCMCluster - Connections Content Manager (FileNet)
PushCluster - Push Notifications
21.
22.
23.
24.
25. I will set up the cognos piece later, so I select Do later here
26. I plan on configuring this system with IBM Docs, which will require additional
physical machines, so I will install the shared directory to an NSF share
(/nsf/IBM/Connections/data/shared)
27.
28.
29. I have a domino server in my environment listening on port 25 for smtp traffic, so I
went ahead and configured notifications to that server.
30.
31.
32.
NOTE: My install took about 2 hours to complete.
Once the install finishes, look in the nodeagent systemout.log log located at
C:\IBM\WebSphere\AppServer\profiles\AppSrv01\logs\nodeagent for the following line:
ADMA7021I: Distribution of application <connections_app> completed successfully.
You will see the following applications get synced:
ADMA7021I: Distribution of application commsvc completed successfully.
ADMA7021I: Distribution of application ibmasyncrsp completed successfully.
ADMA7021I: Distribution of application Activities completed successfully.
ADMA7021I: Distribution of application Mobile completed successfully.
ADMA7021I: Distribution of application FileNetEngine completed successfully.
ADMA7021I: Distribution of application navigator completed successfully.
ADMA7021I: Distribution of application Files completed successfully.
ADMA7021I: Distribution of application Forums completed successfully.
ADMA7021I: Distribution of application News completed successfully.
ADMA7021I: Distribution of application PushNotification completed successfully.
ADMA7021I: Distribution of application RichTextEditors completed successfully.
ADMA7021I: Distribution of application Search completed successfully.
ADMA7021I: Distribution of application Profiles completed successfully.
ADMA7021I: Distribution of application WidgetContainer completed successfully.
ADMA7021I: Distribution of application Moderation completed successfully.
ADMA7021I: Distribution of application Dogear completed successfully.
ADMA7021I: Distribution of application Wikis completed successfully.
ADMA7021I: Distribution of application Common completed successfully.
ADMA7021I: Distribution of application WebSphereOauth20SP completed successfully.
ADMA7021I: Distribution of application Blogs completed successfully.
ADMA7021I: Distribution of application Metrics completed successfully.
ADMA7021I: Distribution of application Homepage completed successfully.
ADMA7021I: Distribution of application URLPreview completed successfully.
ADMA7021I: Distribution of application Help completed successfully.
ADMA7021I: Distribution of application ConnectionsProxy completed successfully.
ADMA7021I: Distribution of application Mobile Administration completed successfully.
ADMA7021I: Distribution of application Communities completed successfully.
ADMA7021I: Distribution of application Extensions completed successfully.
11.1. Configure HTTP Server plugin with Connections
Because I chose to configure the Web Server during the install, the settings and
configuration for Connections will use the IBM HTTP Server url for communication. So
before I start the server for the first time, I need to make sure the HTTP Server plugin is
configured to access the different Connections components.
1. If it's not already open, open a browser to the Integrated Solutions Console and login
(http://cpdocs2.swg.usma.ibm.com:9060/ibm/console)
2. Click on Servers – Server Types – Web servers
3. Select the webserver and click Generate Plug-in
4. Select the webserver and click Propagate Plug-in
5. Open C:\IBM\HTTPServer\conf\httpd.conf in notepad
6. at the bottom of the file find the following line:
LoadModule was_ap22_module
/opt/IBM/WebSphere/Plugins/bin/64bits/mod_was_ap22_http.so
WebSpherePluginConfig /opt/IBM/WebSphere/Plugins/config/webserver1/plugincfg.xml
Make sure the value for WebSpherePluginConfig matches where the plugin-cfg.xml
was propagated to
If they don't match, either manually copy the plugin-cfg.xml to the location specified
in httpd.conf, or update httpd.conf to look in the correct location.
7. Close the httpd.conf
8. Restart the IBM HTTP Server 8.5 service by running
./apachectl stop from /opt/IBM/HTTPServer/bin
./apachectl start from /opt/IBM/HTTPServer/bin
11.2. Start IBM Connections
1. Start IBM Connections
a. Wait for the node to completely sync
b. In the Integrated Solution Console go to Servers > Server Types > WebSphere
application servers
c. Select the clusters, and click Start
d. Once you get the successfully started message, you are ready to test Connections:
Once you get the successfully started message, you are ready to access Connections over
the http server address
12.
Additional HTTP Server config settings
12.1. Configure HTTP Server to compress some files
1. Open httpd.conf (c:\IBM\HTTPServer\conf)
2. Find the following entries in the configuration file:
LoadModule headers_module modules/mod_headers.so
LoadModule deflate_module modules/mod_deflate.so
and uncomment them
3. Add the following after all the LoadModule's
#Only the specified MIME types will be compressed.
AddOutputFilterByType DEFLATE application/atom+xml
AddOutputFilterByType DEFLATE application/atomcat+xml
AddOutputFilterByType DEFLATE application/javascript
AddOutputFilterByType DEFLATE application/json
AddOutputFilterByType DEFLATE application/octet-stream
AddOutputFilterByType DEFLATE application/x-javascript
AddOutputFilterByType DEFLATE application/xhtml+xml
AddOutputFilterByType DEFLATE application/xml
AddOutputFilterByType DEFLATE text/css
AddOutputFilterByType DEFLATE text/html
AddOutputFilterByType DEFLATE text/javascript
AddOutputFilterByType DEFLATE text/plain
AddOutputFilterByType DEFLATE text/xml
AddOutputFilterByType DEFLATE text/xsl
4. Add the following statement to specifically indicate that image files and binaries must
not be compressed to prevent web browser hangs:
# Ensures that images and executable binaries are not compressed
SetEnvIfNoCase Request_URI \\.(?:gif|jpe?g|png|exe)$ no-gzip dont-vary
5. Add the following statement to ensure that proxy servers do not modify the User
Agent header needed by the previous statements:
# Ensure that proxies do not deliver the wrong content
Header append Vary User-Agent env=!dont-vary
6. Add the following statement to ensure you can access the acce tool (admin client for
FileNet)
SetEnvIf Request_URI ^/acce(.*) no-gzip dont-vary
12.2. Configure Files and Wikis to download files
This is an optional step, but recommended in the infocenter. See the following section
for details. http://www01.ibm.com/support/knowledgecenter/SSYGQH_5.5.0/admin/install/t_install_post_files_
downloads.dita
12.3. Configure Connections to use IHS to upload files
This is again an option step, but recommended in the infocenter. See the following
section for details.
http://www01.ibm.com/support/knowledgecenter/SSYGQH_5.5.0/admin/install/t_install_post_files_
uploads.dita
13. Configure IBM Connections Content Manager Libraries
During the install of Connections Filenet was deployed on the system. Post install we
need to configure the FileNet global configuration domain and objectstore. There are 2
scripts we will use to automatically create these.
13.1. Create Filenet Global Configuration Domain (GCD)
1. If not running, start IBM Connections by running:
./startManager.sh from /opt/IBM/WebSphere/AppServer/profiles/Dmgr01/bin
./startNode.sh from /opt/IBM/WebSphere/AppServer/profiles/AppSrv01/bin
Start Connections Clusters by running the following from
/opt/IBM/WebSphere/AppServer/profiles/AppSrv01/bin
./startServer.sh InfraCluster_server1
./startServer.sh UtilCluster_server1
./startServer.sh AppsCluster_server1
./startServer.sh CCMCluster_server1
./startServer PushCluster_server1
2. Run ./createGCD.sh from /opt/IBM/Connections/ccmDomainTool
3. First it will ask you for the DMGR admin ID (localadmin for my environment), then
the password
4. Enter Y to regenerate the dminfo.properties file
5. Next I added an administrator group from my ldap directory
6.
13.2. Create FileNet ObjectStore
7. Run ./ createObjectStore.sh from /opt/IBM/Connections/ccmDomainTool
8. First enter the websphere admin username and password
9. I chose Y to regenerate the dminfo.properties file
10. Same as I did with the GCD, I set the administrator group from my ldap directory
11. Next enter the url used to access Connections (https://cpdocs2.swg.usma.ibm.com)
NOTE: It must be the SSL url
12.
13. Restart Connections to pick up the changes.
14. Apply Connections 5.5 Recommended Day1 fixes
I'm applying the recommended day 1 fixes as of February 12, 2016. See the following
technote for latest recommended updates:
http://www-01.ibm.com/support/docview.wss?uid=swg21972646
Software used in this step:
IBM Connections Day 1 fixes:
http://www933.ibm.com/support/fixcentral/swg/selectFixes?parent=Collaboration%2BSoluti
ons&product=ibm/Lotus/Lotus+Connections&release=5.5.0.0&platform=All&fu
nction=all




interim fix: 5.5.0.0-IC-Multi-IFLO87330
interim fix: 5.5.0.0-IC-News-IFLO87487
interim fix: 5.5.0.0-IC-Common-IFLO87469
refresh pack: 5.5.0.0-IC-Multi-UPDI-20151224
14.1. Install the Day1 ifixes
1. Before getting started shut down the Connections nodes, I left the nodeagents running.
2. Extract the refresh pack: 5.5.0.0-IC-Multi-UPDI-20151224,
unzip 5.5.0.0-IC-Multi-UPDI-20151224.zip -d updateinstaller
3. this will create an AIX-Linux and Windows directory. Under the AIX-Linux
directory is UpdateInstaller.tar. Extract UpdateInstaller to
/opt/IBM/Connections/updateInstaller
tar -C /opt/IBM/Connections -xvf UpdateInstaller.tar
4. Copy the ifix jar files to /opt/IBM/Connections/updateInstaller\fixes
cp 5.5.0.0-IC-Common-IFLO87469.jar 5.5.0.0-IC-Multi-IFLO87330.jar 5.5.0.0-ICNews-IFLO87487-151224.jar /opt/IBM/Connections/updateInstaller/fixes/
5. Follow the Steps in Appendix A to export the display to your desktop
6. From /opt/IBM/WebSphere/AppServer/profiles/Dmgr01/bin/ run
. ./setupCmdLine.sh
NOTE: That's dot space dot forward slash
7. Change directory to /opt/IBM/Connections/updateInstaller/ and run ./updateWizard.sh
8.
9.
10.
11.
12.
13.
14.
15.
16. Delete the contents of /opt/IBM/WebSphere/AppServer/profiles/AppSrv01/temp NOTE: If this step is missed when you access connections again, you will see the
theme from Connections 5.0
17. Start Connections and it should be ready to use.
Appendix - helpful linux stuff
15. Redirecting Display from unix to local windows machine
Redirecting Display\GUI from Unix to Windows:
I.
Install a Xwindows client on your local PC and start a Xsession
Cygwin and Xming are popular clients
II.
Telnet\SSH into Unix server and login as root
III.
Set the DISPLAY to your PC's IP and export the setting
DISPLAY=<your_PC_IP>:0 # DISPLAY=9.9.124.126:0
export DISPLAY
IV.
You may have to disable security using the following command
xhost +
V.
Run following command in the Unix telnet\ssh session should result in a clock
appearing on your local PC
xclock
NOTE: May have to run yum install xorg-x11-apps-7.6-6.el6.x86_64.rpm to install
xclock
Using Xming as your Xwindows client:
The "trick" with Xming is to FIRST start it via the XLaunch (icon or command), NOT
the Xming command/icon. That's because XLaunch allows you to check "No Access
Control" which tells Xming to allow other IP's in. Starting Xming with the Xming
command, causes the default "only allow in local host" mode. I was confused by this
and first started Xming via "Xming" and didn't understand the role of XLaunch.
1. If Xming is already running and on the task bar, click and "exist"
2. Start -> All Programs -> Xming -> XLaunch
3. Select display window option .. click Next
4. Select "Start no client" option.. click Next
5. Select "Clickboard" and "No Access Control" option.. click Next
** If "No Access Control" is not selected, the xsession connection will fail"
6. Click Finish
16. Disable password settings on the OS
http://www.cyberciti.biz/tips/setting-off-password-aging-expiration.html
17. Configure DB2 to start automatically after system restart
On UNIX operating systems, to configure an instance to auto-start after each system
restart, perform the following steps:
1. As root run the following command:
NOTE: dot space /home/db2inst1/sqllib/db2profile
. /home/db2inst1/sqllib/db2profile
2.
Verify that the instance's startAtBoot global registry field value is set to 1 by
checking the output of the following command:
db2greg -getinstrec instancename='<instance name>'
NOTE: If the startAtBoot global registry field value is not set to 1, set the value
to 1 by running the following command:
db2greg -updinstrec instancename='<instance name>'!startatboot=1
3. Enable the instance to auto-start after each system restart, by running the
following command:
db2iauto -on <instance name>
4. Run
db2set -all
Notice DB2AUTOSTART is set to YES
5. Change /opt/ibm/db2/V10.1/bin and run
./db2fm -i db2inst1 -U
./db2fm -i db2inst1 -u **This one gave an error for some reason??**
./db2fm -i db2inst1 -f on
6. Reboot
7. Sign in a db2inst1 and check the state
db2fm -s -S
Now when you restart the machine, DB2 should start automatically
To prevent an instance from auto-starting after each system restart, enter the following
command:
db2iauto -off <instance name>
18. Configure IBM HTTP Server to start automatically
http://www.ibm.com/developerworks/aix/tutorials/au-enterprisewebsvr/section5.html