35923 Federal Register

Federal Register / Vol. 76, No. 118 / Monday, June 20, 2011 / Notices
Radiation’’ (10 CFR part 20), which
requires licensees to determine and
record occupational exposures to
demonstrate compliance with dose
limits for adults (including declared
pregnant women), for an embryo/fetus,
and for minors, and to provide and
direct the use of individual monitoring
devices. In addition, 10 CFR part 34,
‘‘Licenses for Industrial Radiography
and Radiation Safety Requirements for
Industrial Radiographic Operations,’’
includes a specific provision, 10 CFR
34.47, ‘‘Personnel Monitoring,’’ that
requires the use of a direct-reading
pocket dosimeter or, as an alternative to
an ion-chamber pocket dosimeter, an
electronic personnel dosimeter for
industrial radiographer personnel
monitoring. Also, NUREG–1556,
‘‘Consolidated Guidance about Materials
Licenses,’’ Volume 2, ‘‘Program-Specific
Guidance about Industrial Radiography
Licenses,’’ issued August 1998, provides
guidance for the use of pocket
dosimeters in industrial radiographic
operations.
sroberts on DSK5SPTVN1PROD with NOTICES
II. Further Information
On April 9, 2010, DG–8036 was
published with a request for public
comments (75 FR 18241). The public
comment period closed on June 8, 2010.
The staff’s response to public comments
are located in NRC’s Agencywide
Documents Access and Management
System (ADAMS) under Accession No.
ML101900115. The regulatory analysis
may be found in ADAMS under
Accession No. ML101900101. Electronic
copies of Regulatory Guide 8.4, Revision
1 are available through the NRC’s public
Web site under ‘‘Regulatory Guides’’ at
http://www.nrc.gov/reading-rm/doccollections/.
In addition, regulatory guides are
available for inspection at the NRC’s
Public Document Room (PDR) located at
Room O–1F21, One White Flint North,
11555 Rockville Pike, Rockville,
Maryland 20852–2738. The PDR’s
mailing address is USNRC PDR,
Washington, DC 20555–0001. The PDR
can also be reached by telephone at
301–415–4737 or 800–397–4209, by fax
at (301) 415–3548, and by e-mail to
[email protected].
Regulatory guides are not
copyrighted, and NRC approval is not
required to reproduce them.
Dated at Rockville, Maryland, this 10th day
of June, 2011.
VerDate Mar<15>2010
16:50 Jun 17, 2011
Jkt 223001
For the Nuclear Regulatory Commission.
Thomas H. Boyce,
Chief, Regulatory Guide Development Branch,
Division of Engineering, Office of Nuclear
Regulatory Research.
[FR Doc. 2011–15220 Filed 6–17–11; 8:45 am]
BILLING CODE 7590–01–P
NUCLEAR REGULATORY
COMMISSION
[NRC–2011–0136]
Notice of Opportunity for Public
Comment on the Proposed Model
Safety Evaluation for Plant-Specific
Adoption of Technical Specifications,
Task Force Traveler TSTF–510,
Revision 2, ‘‘Revision to Steam
Generator Program Inspection
Frequencies and Tube Sample
Selection’’
Nuclear Regulatory
Commission.
ACTION: Notice of opportunity for public
comment.
AGENCY:
The U.S. Nuclear Regulatory
Commission (NRC) is requesting public
comment on the proposed model safety
evaluation (SE) for plant-specific
adoption of Technical Specifications
(TS) Task Force (TSTF) Traveler TSTF–
510, Revision 2, ‘‘Revision to Steam
Generator Program Inspection
Frequencies and Tube Sample
Selection.’’ TSTF–510, Revision 2, is
available in the Agencywide Documents
Access and Management System
(ADAMS) under Accession Number
ML110610350, and includes a model
application. The proposed change
revises the Improved Standard
Technical Specification (ISTS),
NUREGs–1430, –1431, and –1432,
Specification 5.5.9, ‘‘Steam Generator
(SG) Program,’’ 5.6.7, ‘‘Steam Generator
Tube Inspection Report,’’ and the SG
Tube Integrity specification (Limiting
Condition for Operation (LCO) 3.4.17,
LCO 3.4.20, and LCO 3.4.18 in ISTS
NUREG–1430, –1431, and –1432,
respectively). The proposed changes are
necessary to address implementation
issues associated with the inspection
periods, and address other
administrative changes and
clarifications. The model SE will
facilitate expedited approval of plantspecific adoption of TSTF–510,
Revision 2. This TS improvement is part
of the consolidated line item
improvement process (CLIIP).
DATES: The comment period expires on
July 20, 2011. Comments received after
this date will be considered, if it is
practical to do so, but the Commission
is able to ensure consideration only for
SUMMARY:
PO 00000
Frm 00092
Fmt 4703
Sfmt 4703
35923
comments received on or before this
date.
You may submit comments
by any one of the following methods.
Please include Docket ID NRC–2011–
0136 in the subject line of your
comments. Comments submitted in
writing or in electronic form will be
posted on the NRC Web site and on the
Federal rulemaking Web site http://
www.regulations.gov. Because your
comments will not be edited to remove
any identifying or contact information,
the NRC cautions you against including
any information in your submission that
you do not want to be publicly
disclosed.
The NRC requests that any party
soliciting or aggregating comments
received from other persons for
submission to the NRC inform those
persons that the NRC will not edit their
comments to remove any identifying or
contact information, and therefore, they
should not include any information in
their comments that they do not want
publicly disclosed.
• Federal rulemaking Web site: Go to
http://www.regulations.gov and search
for documents filed under Docket ID
NRC–2011–0136. Address questions
about NRC dockets to Carol Gallagher,
301–492–3668; e-mail
[email protected].
• Mail comments to: Cindy K. Bladey,
Chief, Rules, Announcements, and
Directives Branch (RADB), Division of
Administrative Services, Office of
Administration, Mail Stop: TWB–05–
B01M, U.S. Nuclear Regulatory
Commission, Washington, DC 20555–
0001, or by fax to RADB at 301–492–
3446.
You can access publicly available
documents related to this notice using
the following methods:
• NRC’s Public Document Room
(PDR): The public may examine and
have copied for a fee publicly available
documents at the NRC’s PDR, Room O1
F21, One White Flint North, 11555
Rockville Pike, Rockville, Maryland
20852.
• NRC’s Agencywide Documents
Access and Management System
(ADAMS): Publicly available documents
created or received at the NRC are
available electronically at the NRC’s
Electronic Reading Room at http://
www.nrc.gov/reading-rm/adams.html.
From this page, the public can gain
entry into ADAMS, which provides text
and image files of NRC’s public
documents. If you do not have access to
ADAMS or if there are problems in
accessing the documents located in
ADAMS, contact the NRC’s PDR
reference staff at 1–800–397–4209, 301–
ADDRESSES:
E:\FR\FM\20JNN1.SGM
20JNN1
sroberts on DSK5SPTVN1PROD with NOTICES
35924
Federal Register / Vol. 76, No. 118 / Monday, June 20, 2011 / Notices
415–4737, or by e-mail to
[email protected]. The proposed
model SE for plant-specific adoption of
TSTF–510, Revision 2, is available
electronically under ADAMS Accession
Number ML111150552.
• Federal Rulemaking Web site:
Public comments and supporting
materials related to this notice can be
found at http://www.regulations.gov by
searching on Docket ID: NRC–2011–
0136.
FOR FURTHER INFORMATION CONTACT: Ms.
Michelle C. Honcharik, Senior Project
Manager, Licensing Processes Branch,
Mail Stop: O–12 D1, Division of Policy
and Rulemaking, Office of Nuclear
Reactor Regulation, U.S. Nuclear
Regulatory Commission, Washington,
DC, 20555–0001; telephone 301–415–
1774 or e-mail at
[email protected] or Mr.
Ravinder Grover, Technical
Specifications Branch, Mail Stop: O–7
C2A, Division of Inspection and
Regional Support, Office of Nuclear
Reactor Regulation, U.S. Nuclear
Regulatory Commission, Washington,
DC 20555–0001; telephone: 301–415–
2166 or e-mail: [email protected].
SUPPLEMENTARY INFORMATION: TSTF–
510, Revision 2, is applicable to
pressurized water reactor plants. The
proposed changes revise the ISTS to
implement a number of editorial
corrections, changes, and clarifications
intended to improve internal
consistency, consistency with the
implementing industry documents, and
usability without changing the intent of
the requirements. The proposed changes
to Specification 5.5.9.d.2 are more
effective in managing the frequency of
verification of tube integrity and sample
selection than those required by current
technical specifications. As a result, the
proposed changes will not reduce the
assurance of the function and integrity
of SG tubes. TS Bases changes that
reflect the proposed changes are
included.
This notice provides an opportunity
for the public to comment on proposed
changes to the ISTS after a preliminary
assessment and finding by the NRC staff
that the agency will likely offer the
changes for adoption by licensees. This
notice solicits comment on proposed
changes to the ISTS, which if
implemented by a licensee will modify
the plant-specific TS. The NRC staff will
evaluate any comments received and
reconsider the changes or announce the
availability of the changes for adoption
by licensees as part of the CLIIP.
Licensees opting to apply for this TS
change are responsible for reviewing the
NRC staff’s SE, and the applicable
VerDate Mar<15>2010
16:50 Jun 17, 2011
Jkt 223001
technical justifications, providing any
necessary plant-specific information,
and assessing the completeness and
accuracy of their license amendment
request (LAR). The NRC will process
each amendment application
responding to the notice of availability
according to applicable NRC rules and
procedures.
The proposed changes do not prevent
licensees from requesting an alternate
approach or proposing changes other
than those proposed in TSTF–510,
Revision 2. However, significant
deviations from the approach
recommended in this notice or the
inclusion of additional changes to the
license require additional NRC staff
review. This may increase the time and
resources needed for the review or
result in NRC staff rejection of the LAR.
Licensees desiring significant deviations
or additional changes should instead
submit an LAR that does not claim to
adopt TSTF–510, Revision 2.
Dated at Rockville, Maryland, this 6th day
of June 2011.
For the Nuclear Regulatory Commission.
John R. Jolicoeur,
Chief, Licensing Processes Branch, Division
of Policy and Rulemaking, Office of Nuclear
Reactor Regulation.
[FR Doc. 2011–15225 Filed 6–17–11; 8:45 am]
BILLING CODE 7590–01–P
SECURITIES AND EXCHANGE
COMMISSION
[Release No. 34–64675; File No. SR–EDGA–
2011–18]
Self-Regulatory Organizations; EDGA
Exchange, Inc.; Notice of Filing and
Immediate Effectiveness of Proposed
Rule Change Relating to Amendments
to the EDGA Exchange, Inc. Fee
Schedule
June 15, 2011.
Pursuant to Section 19(b)(1) of the
Securities Exchange Act of 1934 (the
‘‘Act’’),1 and Rule 19b–4 thereunder,2
notice is hereby given that on June 3,
2011, the EDGA Exchange, Inc. (the
‘‘Exchange’’ or the ‘‘EDGA’’) filed with
the Securities and Exchange
Commission (‘‘Commission’’) the
proposed rule change as described in
Items I, II, and III below, which items
have been prepared by the selfregulatory organization. The
Commission is publishing this notice to
solicit comments on the proposed rule
change from interested persons.
1 15
2 17
PO 00000
U.S.C. 78s(b)(1).
CFR 240.19b–4.
Frm 00093
Fmt 4703
Sfmt 4703
I. Self-Regulatory Organization’s
Statement of the Terms of Substance of
the Proposed Rule Change
The Exchange proposes to amend its
fees and rebates applicable to Members 3
of the Exchange pursuant to EDGA Rule
15.1(a) and (c). All of the changes
described herein are applicable to EDGA
Members. The text of the proposed rule
change is available on the Exchange’s
Internet Web site at http://
www.directedge.com.
II. Self-Regulatory Organization’s
Statement of the Purpose of, and
Statutory Basis for, the Proposed Rule
Change
In its filing with the Commission, the
self-regulatory organization included
statements concerning the purpose of,
and basis for, the proposed rule change
and discussed any comments it received
on the proposed rule change. The text
of these statements may be examined at
the places specified in Item IV below.
The self-regulatory organization has
prepared summaries, set forth in
sections A, B and C below, of the most
significant aspects of such statements.
A. Self-Regulatory Organization’s
Statement of the Purpose of, and
Statutory Basis for, the Proposed Rule
Change
Purpose
In SR–EDGA–2011–16,4 the Exchange
filed for immediate effectiveness a rule
filing to amend Rule 11.9 to introduce
three additional routing strategies to the
rule. These routing strategies included
ROBB and ROCO, which were added to
Rules 11.9(b)(3)(c)(vi)–(vii),
respectively, and SWPC, which was
added to Rule 11.9(b)(3)(q).
ROBB/ROCO are routing options
whereby orders check the System for
available shares and then are sent to
destinations on the System routing
table. If shares remain unexecuted after
routing, they are posted on the book,
unless otherwise instructed by the
User.5 The difference between the latter
two routing strategies lies in the
difference in the System routing tables
for the ROBB/ROCO strategies.
SWPC is a routing option under
which an order checks the System for
available shares and then is sent to only
Protected Quotations and only for
displayed size. To the extent that any
portion of the order is unexecuted, the
remainder is posted on the book at the
3 A Member is any registered broker or dealer, or
any person associated with a registered broker or
dealer, that has been admitted to membership in the
Exchange.
4 See SR–EDGA–2011–16 (May 5, 2011).
5 As defined in Rule 1.5(cc).
E:\FR\FM\20JNN1.SGM
20JNN1