Test Instrumentation & Automated Test Systems Power Conversion Hipot / Safety Component

Power Conversion
Hipot / Safety
Component
Automated Systems
Test Instrumentation & Automated Test Systems
Automated Systems
Automated Test Systems
Chroma’s engineering team delivers cost-effective architecture and software platforms designed to fit our customer’s diverse
power conversion and electrical safety test technical requirements by maximizing their time, improving validation processes,
and increasing output.
Our engineering capabilities provide for the design, development and delivery of turnkey automated test systems and
fixtures for many power conversion and electrical safety test applications. We also provide modification and updating of
existing test systems.
Our area of expertise is power conversion test and characterization delivering automated solutions to many industries.
Power Conversion
EV / EVSE
• Switching Power Supply
• EV Charging
• PC Power Supply
• DC–DC Converter
• Telecom Power Supply
• HEV Controller / DC-DC
• Motor Driver
Battery
Medical / Safety
• Programmable Charge/Discharge
• Medical Device – IEC60601-1, IEC
60601-2-49 (Multifunctional Patient
Monitoring Equipment)
• Regenerative Battery Pack
• Secondary Battery Module and Pack
• Electrical Equipment Safety and
Function Test
LED / Lighting
Solar
• LED Power Driver
• On-Grid PV Inverter
• High Speed LED Bulb or Tube In-line
• Off-Grid PV Inverter
• LCD Inverter / Ballast
• Solar Panel
Military / Aerospace
Regenerative Burn-in
• Repair Depot
• AC - AC Power Supply
• Government Contract / Tier-1
Support
• DC - DC Converter
• LED Driver
• Design Verification Test
Telecom ATS
HEV Controller / DC-DC ATS
PV Inverter ATS
2
chromausa.com/systems
EV Charger ATS
17030 Regenerative Battery
Pack ATS
Switching Power Supply ATS
DC - DC Converter ATS
17020 Programmable
Charge/Discharge ATS
8000 Automated Test Platform
Hardware
Software
Test Fixtures
• Widest Selection of High Precision Test
Instrumentation
• Enterprise Wide Open Architecture
Platform
• Engineering Characterization & Design
Validation
• Highly Customizable Configurations &
UUT Interfaces
• Custom Reporting with Waveforms &
Graphs for R&D & Design Validation
• Custom Test Fixtures & Test Programs
• Extensive Comm. Support: CAN, LAN/
Ethernet, I2C, PMbus, USB, GPIB, Serial,
etc.
• Fast & Easy, Excel Like Test Sequence
Development
• A/B & Parallel Testing for High Volume
Applications
• Customer Editable Test Library Without
Coding
• Vendor Qualification & Incoming
Inspection
• Statistical Reporting
• Depot Repair & Failure Analysis
• Individual Instrumentation Display
Panels & Controls Simplifies Debugging
• Supports Complex Inter-Instrument
Triggering
• Optimized for High Throughput Testing
• Dynamically Configurable for R&D
Engineering & Design Validation
• Command Optimizer Maximizes Test
Speed
• A/B & Parallel Testing for High Volume
Applications
• High Volume Production
Global Support
• Global Operations & Worldwide Support
• Depot Repair & Failure Analysis
• Local & International Program
Management
3
AC Power Sources
chromausa.com/instruments/ac-sources
Regenerative Grid Simulator: 61800
Designed for PV inverter, Smart Grid and EV related test applications, the 61800 Regenerative Grid
Simulator is a full 4 quadrant, fully regenerative, programmable AC power source with advanced
features for compliance, safety and product verification testing. Power can both sink and source
from the UUT seamlessly to support a multitude of applications. In cases where the UUT sources
current, a detection circuit will sense the excess power and recycle it back to the grid. Using stateof-the-art digital control technology the 61800 can deliver up to 300VAC at output frequencies
ranging from 30Hz to 100Hz. The AC+DC feature allows for applications that require a DC offset
bias.
Power rating: 30kVA / 45kVA / 60kVA single or three phase output
Full Four-quadrent, Full Regenerative Design
Output voltage: 0-300VLN / 0-520VLL
Current (+)
Unique Features
1
4
V
• Full 4 quadrant, fully regenerative up to 100% of output current rating
Sink 2
3
• Programmable voltage and current limits
Source 1
2
Voltage (-)
• Voltage dips, short interruption, voltage variation, phase angle control, etc.
1
• Harmonics, inter-harmonics waveform synthesizer
I
Source 3
3
• GPIB, RS-232, USB and Ethernet
Output Curr.
Programmable AC Source: 61500
Voltage (+)
2
Sink 4
4
Reverse Curr.
Current (-)
Model 61860
The 61500 series defines a new standard in high performance AC power sources. It's equipped with powerful features such as power line disturbance simulation,
programmable output impedance, comprehensive measurement functions and optional regulation test software.
Power Rating: up to 90kVA, single and three phase
Output Voltage: 0-150V / 0-300V
Unique Features
• Programmable transients for Mil-Std-704, DO-160 and IEC standards
• Built-in Harmonics, inter-harmonics and waveform generator
• Wide range of models starting at 375VA
List Mode:
voltage transient
programming
Model 61512
• Labview graphical user interface including Aerospace standards
• GPIB, RS232, USB and Ethernet
Distorted Waveform Editor
All Programmable AC Power Sources
Line
Simulation
Standard Low Power
Standard High Power
Advanced Low Power
Advanced High Power
61600
61611, 61612
61500
61511, 61512
61800
Power Rating
500VA - 4000VA
12kVA / 18kVA
500VA - 4000VA
12kVA / 18kVA
30kVA / 45kVA / 60kVA
Voltage Range
0-150V/0-300V/Auto
0-150V/0-300V/Auto
0-150V/0-300V/Auto
0-150V/0-300V/Auto
0-300VLN / 0-520VLL
Model
Frequency
Remote Interface
Grid Simulator
DC, 15Hz-1kHz
DC, 15Hz-1.5kHz
DC, 15Hz-1kHz
DC, 15Hz-1.5kHz
DC, 30Hz-100Hz
GPIB, RS-232C
GPIB, RS-232, USB, Ethernet
GPIB, RS-232C (opt)
GPIB, RS-232, USB, Ethernet
GPIB, RS-232, USB, Ethernet



LIST, PULSE, STEP mode
functions
Programmable voltage and
current limit





Programmable slew rate setting
for changing voltage and
frequency














Harmonic synthesizer (up to 50)
Turn on, turn off degree / phase
angle


Comprehensive measurement
capability, including current
harmonics
4
Line
Simulation
Analog programmable interfaces


Optional


Optional Graphic User Interface





DC Power Supplies
chromausa.com/instruments/dc-power-supplies
Programmable DC Power: 62000H
Chroma’s 62000H Series of programmable DC Power Supplies
offer many unique advantages for telecom, automated test
system and integration, industrial, battery charge & simulation
for hybrid cars and solar panel simulation. These advantages
include a high power density of 15KW in 3U, precision read back
of output current and voltage and output trigger signals as well
as the ability to create complex DC transient waveforms to test
device behavior to spikes, drops and other voltage deviations.
Power range: 2KW / 5KW / 10KW / 15KW
Operating range: 1000V / 375A
Unique Features
• Master/Slave, parallel and series operation to 150KW with current
sharing
• High speed transient generator for solar, automotive and aerospace
applications
• Voltage & Current Slew Rate Control
• Labview graphical user interface
• GPIB, RS232, USB and Ethernet
Model 62150H-40
Solar Array Simulation
62000H-S models have a built in SAS mode that can easily
program Voc, Isc, Vmp and Imp parameters to simulate different
solar cell materials I-V characteristic outputs with fast response
time required for PV Inverter design as well as verification
testing.
All Programmable DC Power Supplies
Constant Power DC Supply
Modular - Hot Swappable
Programmable High Power
Solar Array Simulation (SAS)
62000P
62000B
62000H
62000H-S
Power Rating
600W, 1200W, 2400W, 5000W
up to 1.5kW per module - up to
120KW per system
5kW / 10kW / 15kW
2kW / 5kW / 10kW / 15kW
Voltage Range
0 - 600V
1 - 150V
0 - 1000V
0 - 150V/600V & 1000V
up to 2000A (System)
0 - 375A
Model
Current Range
High-speed Programming


Precision V&I Measurements



Current sharing for parallel
operation with Master/Slave
Control




Ideal for Burn-in & Electrolysis


Voltage & Current Slew Rate
Control



Standard Analog Programming
interface




Fast transient response solar
array simulation

Static & dynamic MPPT efficiency
test

Optional Graphic User Interface




5
Electronic Loads
chromausa.com/instruments/electronic-loads
Modular Electronic DC Load: 63600
Power Range: up to 2KW, 10 channels (High Power loads: Up to 75KW)
Operating Range: up to 1000VDC
Unique Features
• Voltage and current waveform digitizer on each channel
• Unique constant CZ allows for non-linear load simulations
• Current down to zero voltage, full current to 0.4VDC
• High speed transient generator
• Labview graphical user interface
• GPIB, RS232, USB and Ethernet
Model 63600 - 5 bay mainframe
The new generation 63600 DC Electronic Loads provide an innovative Dynamic Sweep mode with Vpk measurements that can be run independently on each
module or in parallel for high power loading. Also allows for three measurement ranges for precise voltage and current measurements making it ideal for ENERGY
STAR® testing requirements. The 63600 also provides an enhanced feature, User Defined Waveform (UDW), to simulate the actual current profiles and waveforms.
Programmable AC Load: 63800
Power Rating: up to 67.5KVA - 3Ph
Peak Current: up to 135A
Unique Features
• High Crest Factor Range: 1.414 to 5.0
• CC, CR, CV, CP for DC loading
• Parallel units for higher power and three phase operation
• GPIB and RS-232 interfaces
Chroma’s 63800 AC/DC load simulates load conditions under high crest factor and
varying power factors with real time compensation even when the voltage waveform
Model 63802 - 4.5KW / 45A / 350V
is distorted. This special feature provides real world simulation capability and prevents
overstressing resulting in reliable and unbiased test results. The 63800 uses DSP
technology to simulate non-linear rectified loads with its unique RLC operation mode. This mode improves stability by detecting the impedance of the UUT and
dynamically adjusting the load’s control bandwidth to ensure system stability. Designed for testing UPS’s, off-grid inverters, AC sources and other power devices.
All Electronic Loads
Programmable AC Load
High Power DC Load
Standard DC Load
Advanced DC Load
63800
63200
6310A Modular
63600 Modular
Power Rating
1800W/3600W/4500W
2600W, 5200W, 6500W, 10400W,
14500W, 15600W
100W, 200W, 250W, 300W, 600W
100W, 300W, 400W
Voltage Range
50V – 350Vrms
0-80V / 0-600V / 0-1000V
0 - 500V
0 - 600V
Current Range
up to 45Arms
up to 1000A
up to 240A
up to 80A per module
Dynamic Loading
45-440Hz
20kHz
20kHz
50kHz
Remote Interface
Model
RS-232, GPIB
RS-232, GPIB
USB, GPIB & RS-232, Ethernet
USB, GPIB, Ethernet
Max Channels per Mainframe
1
1
8
10
Master/Slave Parallel Control


Synchronize with Multiple Loads
Load Modes

CC, CR, CP
Programmable Slew Rate


CC, CR, CV, CP
CC, CR, CV, CP
CC, CR, CV, CP, CZ



LED Array Simulation
Constant Impedance Mode




V & I Digitizer

Analog Input
Optional Graphic User Interface
6






Power Meters
& Multi Meters
chromausa.com/instruments/meters
Power Meters: 66204 Multi-Channel
Chroma’s 66203 and 66204 Power Meters make accurate power measurements for various wiring modes
including three phase WYE and DELTA and split phase. These power meters feature state-of-the-art DSP
digitizing technology which replaces less accurate and slower traditional analog circuits. The internal
16 bit analog/digital converters with sampling rates of up to 250 kHz provide both high speed and high
accuracy measurements. The meters are designed to comply with power measurement requirements in
accordance to many international standards such as ENERGY STAR®, EN 50564, IEC 62301 and ErP.
Power Range: up to 600Vrms (1200Vrms opt.)
Operating Range: up to 20Arms p/ch (100Arms w/ opt. external shunt)
Main screen
Unique Features
• Embedded high speed DSP, 16 bits Analog/Digital converters
• Supports different wiring configurations for power measurement
(1P2W/1P3W/3P3W/3P4W)
• Dual current shunt design provides high accuracy over a wide current range
• 5 mA minimum current range and 0.1mW power resolution
• Accumulated energy methods for unstable power measurements
• THD and user-specified order distortion measurements
• Inrush current and energy measurements
• Voltage and Current harmonics measurement up to 50 orders
Current harmonic measurement table
• Labview graphical user interface
• GPIB, RS232, USB and Ethernet
Model 66204 - 4 channel
Multimeters
All Power Meters
Model
Voltage Range
Single Channel
Multi-Channel
66201 / 66202
66203 / 66204
150 / 300 / 500 Vrms
15 / 30 / 60 / 150 / 300 / 600
1200 (optional) Vrms
0.01 / 0.1 / 0.2 / 0.4 / 2 / 8 / 20
Arms
0.005 / 0.02 / 0.05 / 0.2 / 0.5 / 2 /
5 / 20 Arms
Frequency Range
DC, 15Hz-10kHz
DC, 15Hz-10kHz
Minimum Current Range / Power
Resolution
10mA / 0.1 mW
up to 2000A (System)
Measurement Channels
1
3/4
Meets ENERGY STAR® / IEC
62301 / EN 50564 / ErP


Embedded high speed DSP, 16
bits Analog / Digital converters


Current Range
Dual current shunt design
provides high accuracy over a
wide current range
66202 only

THD and user-specify order
distortion measurement
66202 only

Inrush current and energy
measurements
66202 only


Voltage / Current harmonics
measurements up to 50 orders
Supports various single and 3
phase wiring configurations
Optional Graphic User Interface

Digital Multimeter
Model
Resolution
12061
6 ½ Digits
DC voltage/current (1000V/3A
max)
Measurement Characteristics
AC voltage/current (750V/3A
max)
Resistance, 2 or 4 wire ohms
measurement, Period & frequency,
Diode & continuity, Temperature
(Thermocouple & RTD)
Math Functions
DC Voltage Accuracy
AC Voltage Accuracy
NULL Max / Min / Avg High / Low
limit Percentage / Ratio / MX+B
dB / dBm
0.0015%
0.04%
Remote Interface
USB (standard), GPIB (option)
Memory Storage
2000 readings
Optional Multi-point TC Scanner
Card (10ch), multi-point scanner
card (10/20ch)


Measurement and data
transmission up to 2000
readings/sec (4½)


Standard SCPI control


Optional Graphic User Interface

7
Safety Analyzers
chromausa.com/instruments/hipotsafety
Safety Analyzer: 19032
The19032 performs six dielectric tests in one unit including AC/DC
Hipot, Insulation Resistance, Ground Bond, Leakage Current and
Dynamic Function tests for compliance testing of IEC, UL, TUV, CSA,
EN and other standards. The time-saving TwinPort™ feature performs
Hipot and Ground Bond simultaneously cutting time for these tests
in half. The 19032 also has an open / short check function (OSC)
that checks for an open connection or a DUT short during testing.
The analyzer’s leakage current scanners can provide up to 20A
input current capability for functional run testing as well as earth,
patient and line leakage current tests. The analyzer is equipped with
programmable limits for pass/fail testing as well as storage and recall
of 50 different test setups with 100 steps per setup.
Hipot Output Voltage: AC 0.05 - 5kV, DC 0.05 - 6kV
19032 hipot safety analyzer
Common Applications
Insulation Resistance Test: 0.1MΩ ~ 50GΩ / 1kV Max
• Power Supplies, Adapter and Chargers
• Video Products (IEC 60065)
Unique Features
• Home Appliance (IEC 60335)
• Lab/Testing Equipment
• Six tests in one unit: AC / DC / IR / GB / LC / Dynamic Function
• Information Technology Products (IEC 60950)
• Electric Vehicle Safety
• Optional patient leakage test
• Medical Devices (IEC 60601)
• EMI Filters
• UL / TUV / CE
Automate testing by using our CaptivATE software with a Guardian 19032 Safety Analyzer.
Test functions include: AC/DC Hipot, insulation resistance, ground bond, earth leakage,
patient leakage, patient auxiliary leakage, or enclosure current leakage, as well as a
functional check. Provides tests for IEC 60601/60950/61010/60335 requirements. Testing
is made simple and fast by automatically downloading the test setup, conducting the
required measurements and outputting the test results.
Wound Component
Safety Analyzer
Electrical Safety Analyzer
Wound Component Analyzer
Guardian19032 / 19032-P 500VA
Hybrid 19035
19036
AC / DC / IR / GB / LC / Dynamic Function
AC / DC / IR / DCR -8CH
AC / DC / IR / Impulse (surge) / DCR
1
8
10
AC: 0.05 - 5kV
DC: 0.05 - 6kV
AC: 0.05 - 5kV
DC: 0.05 - 6kV
AC: 0.05 - 5kV
DC: 0.05 - 6kV
0.1MΩ ~ 50GΩ / 1kV Max
1MΩ ~ 50GΩ / 5kV Max
0.1MΩ ~ 50GΩ / 5kV Max
4-wire DCR measurement
4-wire DCR measurement, Δ / Y motor
winding calculation
RS-232 (std) GPIB (opt)
RS-232 (std) GPIB (opt), Handler (opt)
RS-232, Handler, USB, LAN
OSC (Open / Short Check)



Flashover Detection



GFI (Ground Fault Interrupt)






 UL/TUV/CE


Model
Mode (Model Specific)
Channels
Hipot Test: Output Voltage
Insulation Resistance Test
Ground Bond Test
Leakage / Patient Leakage Test
10mΩ ~ 510mΩ / up to 40A
with A190308 Leakage Scanner
DCR Measurement
Remote Interface
Flashover Detection
CE mark
Impulse Winding Test
8
Wound Component Scanner

Hipot Testers
& Ground Bond
chromausa.com/instruments/hipotsafety
Multi-Channel Hipot Tester: 19020
Ground Bond Tester - 45Amp
The Guardian 19020 comes equipped with the world’s first sync hipot test function. A single
unit can perform 10 channels sync output and measurements simultaneously. Ten units in
master & slave configuration can be controlled simultaneously for 100 channels in total. They
also can be grouped for output to avoid creating voltage differences due to adjacent tests as
well as to improve productivity.
The 19572 is an instrument dedicated to measuring
grounding resistance within a range of 0.1~510mΩ.
Its compact size and easy operation makes it perfect
for testing in a production line. Since it supplies highly
reliable and stable test results with a built-in resistance
compensation function, the
19572 is an economical and
useful ground bond tester.
• 10 channels per unit - up to 100 channels total
Ground Bond Tester
19572
Model
High Current Ground Continuity
Resistance Measurements
Digital Readout
up to 45Amps
0.1mΩ up to 45Amps
Current, Resistance, Test Time
Communication Interface
Certification
RS-232 (std) GPIB (opt)
CE, TUV
Programmable high and low
resistance limits

Adjustable test time

Built-in calibration via software

Automatic offset of lead
resistance

Built-in resistance compensation

19020 multi-channel hipot tester
All Hipot Testers
Model
Mode (Model Specific)
Channels
Standard Hipot Tester
Advanced Hipot Tester
Hipot Analyzer 500VA
High Voltage Hipot
Analyzer
Multichannel Hipot
Tester
Sentry 19070
Guardian 19050
Guardian 19055, 19055-C
Guardian 19056, 19057
Guardian 19020
AC or AC / DC / IR
AC / DC / IR or
AC / DC / IR / SCAN
AC / DC / IR
AC or DC / IR
AC or AC / DC / IR
1
1, 8 (opt)
1
1
10
Hipot Test: Output Voltage
AC: 0.05 - 5kV
DC: 0.05 - 6kV
AC: 0.05 - 5kV
DC: 0.05 - 6kV
AC: 0.05 - 5kV
DC: 0.05 - 6kV
19056: AC 0.1 - 10kV
19057: DC 0.1 - 20kV
AC: 0.05kV - 6kV
DC: 0.05kV - 8kV
(models vary)
Hipot Test: Cutoff Current
AC: 20mA
DC: 5mA
AC: 30mA
DC: 10mA
AC: 100mA
DC: 25mA
19056: AC 20mA
19057: DC 10mA
AC: 10mA
DC: 5mA
1MΩ - 50GΩ / 1kV max (19073
only)
1MΩ - 50GΩ / 1kV max
1MΩ - 50GΩ / 5kV max
0.1MΩ - 50GΩ / 5kV max
1MΩ - 50GΩ / 1kV max
Remote Interface
RS-485 (opt)
RS-232 (std), GPIB (opt)
RS-232, Handler (std), GPIB (opt)
RS-232, Handler, USB, SCAN
(std), GPIB (opt)
RS-232, Handler (std), GPIB (opt)
*CANBUS & DCI used for Max. 10
units master/slave connections
Certification
CE, UL, TUV
CE, UL, TUV (most models)
CE
CE
Insulation Resistance Test
Master/Slave link
CE

Programmable output and limits





OSC (Open/Short Check)





Flashover Detection





GFI (Ground Fault Interrupt)




Corona Discharge Detection
(19055-C)
Ground Continuity Check
Fast charge/discharge function
Contact Check Function




HFCC
HVCC, HFCC
9
LCR, IR, and Milliohm
Meters
chromausa.com/instruments/meters
10MHz LCR Meter with Detached Design: 11050
Milliohm Meters: 16502
• Basic accuracy : 0.05%
• Test Parameters: L/C/R/Z/Y/DCR/Q/D/ θ
• Pulsed test current output mode to reduce the
effect of thermal EMF on milliohm measurement
• Test Frequencies: 1kHz ~ 10MHz
• DC test current output mode to increase
measurement speed for inductive DUT
• Test Level: 10mV ~ 5V
• Basic Accuracy: 0.1%
• Dry-circuit test current output mode (limited Max.
20mV) is used to measure such contact resistances
where the maximum open-circuit voltage must be
limited to 50mV
In addition to the excellent
measurement features
shared with other Chroma
LCR Meters, the 11050 has 3
output impedance modes to
11050 10MHz LCR meter
meet the demands of measuring
and working with other instruments.
The flexible digital display allows adjustment
to best fit the test resolution, while the test signal monitoring function is able to display the voltage
and current actually being applied to the DUT. The timing settings for trigger delay, measure delay,
and average number of times allow the measurements to work closely with automated machines
to get the most accurate results with limited testing time. The detached design of the Chroma
11050 uses a dual CPU system for processing the testing and display individually. This not only
increases testing speed but also shortens test lead lengths when used with automated machines to
improve the accuracy of high frequency measurements.
• Temperature correction
(TC function) regardless
of material or
temperature
Digital Milliohm
Meter
16502
Model
Test Modes
DC Mode, Pulse Mode,
Dry Circuit
Measurement Range
0.001mΩ - 1.9999MΩ
with 4 1/2 digits
resolution
Basic Accuracy
Measurement Time
Communication Interface
0.05%
65ms - 650ms
RS-232 (std), Handler &
GPIB (opt)
All LCR Meters
Model
100kHz LCR Meter
Capacitor Leakage Current/
IR Meter
11021 / 11021-L
11022 / 11025
11200
C/D
10MHz LCR Meter
50 kHz LCR Meter
11050
Test Parameters
L, C, R, Z, Y, DCR, Q, D, ø
Primary: L, C, R, | Z |
Secondary: Q, D, ESR, Xs, ø
L, C, R, | Z |, Q, D, ESR, X, ø
DCR4, M, Turns Ratio, L2, DCR2
(11025 only)
Test Frequency
1kHz - 10MHz
100Hz, 120Hz, 1kHz, 10kHz
(9.6kHz)(11021)
1kHz, 10kHz, 40kHz, 50kHz
(11021-L)
50Hz, 60Hz, 100Hz, 120Hz, 1kHz,
10kHz, 20kHz, 40kHz, 50kHz,
100kHz
100Hz, 120Hz, and 1kHz
10mV - 5V
0.25V / 1V (11021)
50mV / 1V (11021-L)
10 mV - 1V , step 10 mV
1V
0.1%
0.1% (11021)
0.2% (11021-L)
0.1%
0.1%
Measurement Time
15ms - 295mS
75mS
21mS
2mS ~ 15mS
Output Impedance Modes
100Ω, 25Ω, OFF
Varies as range resistors 25Ω, 100Ω,
1kΩ, 10kΩ, 100kΩ
2Ω, 10Ω, 25Ω, 100Ω
Varies as range resistors
Adjustable DC Bias Current


11025 only

Compare, Bin-sorting
Bin-sorting & HI/GO/LOW judge
Bin-sorting & HI/GO/LOW judge
HI/GO/LO judge
Open/short zeroing & load
correction function



Zeroing only
Detached measurement &
display unit design

Handler (50pin), GPIB, RS-232
RS-232 (std)
Handler & GPIB (opt)
Test Levels
Basic Accuracy
Test Signal Monitoring Function
Output Signal

Lower Harmonic-distortion
affection
Remote Interface
10


RS-232C, Handler, USB storage,
Ext bias current control (std)GPIB,
LAN (opt)
RS-232 (std)
Handler & GPIB (opt)
Data Loggers
and TEC Controllers
chromausa.com/instruments/thermoelectric
Data Loggers: 51101
Data Logger
51101-8 / 8 channel
Model
Thermocouple/Temperature Accuracy
Thermocouple Jacks/Connectors
Number of Inputs (Model Dependent)
51101-64 / 64 channel
Temperature Sensor Type
51101-1 / single channel
Temperature Scale
Temperature Resolution
Chroma thermal/multi-function data loggers measure temperatures, voltages,
and currents with high accuracy and resolutions. For example, they support
8 types of thermal couples measurement with ITS-90 defined temperature
range at 0.3°C accuracy and 0.01°C resolution, while most data loggers in
the market are at 1°C accuracy and 0.1°C resolution. Chroma loggers provide
1000VDC channel to channel isolation, which means they can attach thermal
couples to objects with high voltage, such as batteries, solar cells, working
PCB, etc., and still get correct data. Many competitors simply malfunction, or
are even damaged in those cases. Chroma loggers use a parallel architecture
for data retrieval, while most of our competitors use a sequential multiplexing
method. This means data rate per channel is quick and constant for Chroma
loggers, while others become much slower as more channels are used.
CJC Error
Maximum Sample Rate
Channel to Channel Isolation
Input Resistance
Thermocouple break detection current
PC Communication Port (Model
Dependent)
51101
±(0.01% of reading +0.3) ˚C
B, E, J, K, N, R, S, or T mini-type
1, 8, 16, 24, 32, 40, 48, 56, 64 channel
Thermocouple: B, E, J, K, N, R, S, T
ITS-90
±0.01˚C
±0.3˚C
5 sample/sec.
1000VDC / 750 Vrms
5MΩ
100 nA
RS-232 Half Duplex (DB-9 connector),
USB2.0 (USB A-Type or B-Type
connectors)
Power Requirement (Model Dependent)
4.5~5.5 V, 11.4~12.6 V
Maximum Power Consumption (Model
Dependent)
0.22 W, 1.2 W, 18 W
Thermal Electric Controllers: 54100
54100 TEC Controller
TEC Controller
Model
24, 27, or 40VDC
TEC Output Current (Model dependent)
8, 12, or 20A
TEC Driving Output Power (Model
Dependent)
Controller Temperature Setting Range
(Model Dependent)
Chroma’s Advanced TEC Controllers have an excellent temperature
monitoring engine, which allows 2 T-type thermal couple inputs. The cold
junction of the engine is internally stabilized up to 0.001°C so that 0.01°C
temperature resolution and control stability can be achieved. The TEC driver
uses a filtered PWM architecture which obtains high driving power efficiency
as ordinary PWM drivers, but smoothens the current modulation to a DC-like
output; very important for electro-magnetic sensitive measurements.
Another important feature is the true TEC PID auto tune function. Chroma’s
Advanced TEC Controllers have unique auto tune algorithm to guarantee the
best control and temperature response. Stability down to the temperature
resolution, which is 0.01°C, is regularly achieved regardless the size and
geometry of thermal platforms.
54100
TEC Output Voltage (Model dependent)
150, 300, or 800W
-49 to 149° or -70 to 20°
Controller Setting Resolution
0.01°
Temperature Control Stability
Short Term: ≤0.01°
Long Term: ≤0.05°
Monitoring Temperature Range (Model
Dependent)
Temperature Sensor Type
Monitoring Temp Resolution
-49 to 149° or -70 to 20°
T-type (Std)
K-type (Opt 54180)
0.01°
Monitoring Temp Relative Accuracy
≤0.03°
Monitoring Temp Absolute Accuracy
< ±(0.3+0.002×|T-25|)°
Power Requirement
Maximum Power Consumption (Model
Dependent)
PC Communication Port (Model
Dependent)
90 to 240 VAC, 50/60 Hz
330, 550, or 1400W
RS-232 Half Duplex
(54180 only) USB2.0, LAN 10/100Mbps
11
America’s
Europe
Japan
Taiwan / China
Chroma Systems Solutions, Inc. | 19772 Pauling, Foothill Ranch, CA 92610 | TEL 949-600-6400 FAX 949-600-6401 | www.chromausa.com
CSS 02/2015