...

MAGTROL Model 5210 Current Regulated Power Supply 5210

by user

on
Category: Documents
16

views

Report

Comments

Transcript

MAGTROL Model 5210 Current Regulated Power Supply 5210
M AGTROL
5210
Data Sheet
Model 5210 Current
Regulated Power Supply
DESCRIPTION
The Model 5210 is a current regulated power unit designed
to minimize torque drift, resulting from the internal heating
of the hysteresis brake during operation. It is a solid-state
control providing the smooth application of current from zero
to maximum in ten turns of the potentiometer.
The 5210 can be controlled manually from the front panel, or
externally from the 0–5 V DC input.
SPECIFICATIONS
5210-1
5210-2
5210-3
0 to 90 V DC
0 to 24 V DC
0 to 12 V DC
Width
7.50 in 191 mm
Low Scale
0 to 50 mA
0 to 200 mA
0 to 300 mA
Depth
9.75 in 248 mm
Medium Scale
0 to 150 mA
0 to 500 mA
0 to 750 mA
Height
2.75 in
High Scale
0 to 300 mA
0 to 1000 mA
0 to 1500 mA
Range
Accuracy
± 1% Full Scale
Current Regulation
± 1% Full Scale
FRONT PANEL
•
Dimensions
70 mm
MAGTROL Model 5210 Power Supply
MED
ADJUST: 10-turn potientiometer for adjusting
from 0 to maximum
LOW
HIGH
DEC.
ON
INC.
OFF
BRAKE CURRENT
RANGE
EXTERNAL CONTROL
0 – VDC
120V 1A
90V
24V
12V
48 – 63 Hz 60VA FUSE
240V 1/2 A
74M023 05/03
EXTERNAL CONTROL: Used when remote
operation is desired (0-5 volts at scale indicated)
BRAKE: 2-pin plug used for connection to
brake—the smaller pin is positive
MAGTROL, INC. BUFFALO, NY
Due to the continual development of our products, we reserve the right to modify specifications without forewarning.
www.magtrol.com
MAGTROL SA
Route de Moncor 4B
1701 Fribourg, Switzerland
Phone: +41 (0)26 407 3000
Fax: +41 (0)26 407 3001
E-mail: [email protected]
Subsidiaries in:
• Germany
• France
• Great Britain
Worldwide Network
of Sales Agents
Magtrol SA ISO 9001:2000 certified
SWISS
CER
70 Gardenville Parkway
Buffalo, New York 14224 USA
Phone: +1 716 668 5555
Fax: +1 716 668 8705
E-mail: [email protected]
TI
ISO 9001
ON
MAGTROL INC
TI
•
POWER
BRAKE
REAR PANEL
•
ADJUST
FIC A
Fly UP