Comments
Description
Transcript
Oral Fluid Collection For OraQuick
Oral Fluid Collection for OraQuick Advance Rapid HIV 1 / 2 Antibody Test Oral Fluid Collection For OraQuick Advance Rapid HIV 1 / 2 Antibody Test I. Purpose: To obtain an adequate oral fluid specimen for rapid HIV testing using the OraQuick Advance Rapid HIV 1 / 2 Antibody test. II. Materials A. Test Device (from OraQuick Advance Rapid HIV 1 / 2 Antibody Test Kit) B. Test Device Pouch (or disposable zippered plastic bag) C. Optional: Disposable latex gloves (or non-latex if employee and/or client has a latex allergy). Testing personnel with breaks in the skin (cuts, abrasions, or dermatitis) should wear gloves when performing oral fluid testing. III. Procedure A. Open the OraQuick Advance pouch. Have the client remove the Test Device paddle. Do not allow the client to touch the Flat Pad. Check the pouch to make sure that an Absorbent Packet was included with the device. If no Absorbent Packet is present, discard that Test Device paddle and open a new one. B. Instruct the client to a. Place the Flat Pad above the teeth against the outer gum. b. Gently swab completely around the outer gums, both upper and lower, one time around, using the flat pad. c. Both sides of the Flat Pad may be used during this procedure. C. Do not allow the client to swab the roof of the mouth, the inside of the cheek, or the tongue. D. The Test Device paddle is now ready to be inserted into the test vial. If the Test Device paddle must be carried to the test area, place it inside either the Pouch or a plastic zip lock bag for safe transporting. (Discard the Absorbent Packet from the Pouch before using it to carry a client specimen to the test area.) IV. Limitations Activity such as eating, drinking, or smoking tobacco more than 5 minutes prior to testing does not appear to have any effect on the results. Procedure # RL.06.01 Page 1 of 2 Oral Fluid Collection for OraQuick Advance Rapid HIV 1 / 2 Antibody Test V. Reference OraSure Product Insert #3001-1215 July, 2004. OraSure Technologies Inc. Bethlehem PA 18015 VI. Author Martha S. Boehme, MT(ASCP) VII. Procedure Review: written: August 2, 2005 printed: September 20, 2016 Date Initials Date installed or replaced ____/____/____ Date removed _____/ ____/____ Supervisor: _________________ Director: ___________________ Procedure # RL.06.01 Page 2 of 2