Stakeholder Comment and Rationale Form AESO AUTHORITATIVE DOCUMENT PROCESS Stakeholder Consultation Draft
by user
Comments
Transcript
Stakeholder Comment and Rationale Form AESO AUTHORITATIVE DOCUMENT PROCESS Stakeholder Consultation Draft
Stakeholder Comment and Rationale Form AESO AUTHORITATIVE DOCUMENT PROCESS Stakeholder Consultation Draft 2013-08-15 Proposed Removal of Existing ISO OPP 1305 WECC Reliability Management and Related Reporting (“ISO OPP 1305 Removal”) Date of Request for Comment [yyyy/mm/dd]: Period of Consultation [yyyy/mm/dd]: Comments From: 2013/08/30 2013/08/15 through 2013/08/30 Company Name Contact: Company Contact Phone: Contact Phone Number E-mail: Date [yyyy/mm/dd]: Listed below is the summary description of changes for the proposed new, removed or amended sections of the ISO rules. Please refer back to the Letter of Notice under the “Attachments to Letter of Notice” section to view the actual proposed content changes to the ISO rules. Please place your comments / reasons for position underneath (if any). 1. ISO Rules (a) Removals Comments Comment # 1: Insert Comments / Reason for Position (if any) AESO Replies The AESO is proposing to remove existing ISO OPP 1305 WECC Reliability Management and Related Reporting (“ISO OPP 1305”) in its entirety. Much of the appropriate authoritative content from ISO OPP 1305 is duplicated in the related Alberta Reliability Standards VAR-002-AB-1.1b Generator Operation for Maintaining Network Voltages; VAR-002-WECC-AB-1 Automatic Voltage Regulators and Voltage Regulating Systems; and VAR-501-WECC-AB-1 Power System Stabilizer (collectively “the related VAR standards”), and in the AESO’s Reliability Management System agreement with the Western Electricity Coordinating Council. Authoritative content which is not duplicated in these documents has been relocated to proposed New Section 306.6 of the ISO Rules Automatic Voltage Regulator and Power System Stabilizer Outage Reporting (“New Section 306.6”). Where appropriate, non-authoritative content has either been removed or relocated to the internal AESO System Controller Procedures Manual. Accordingly, it is the AESO’s opinion that ISO OPP 1305 is not required once the related VAR standards and proposed New Section 306.6 come into effect. Issued for Stakeholder Consultation: 2013-08-15 Page 1 of 2 The AESO is seeking comments from stakeholders with regard to the following matter: 1. Do stakeholders agree or disagree that ISO OPP 1305 can be removed once the related VAR standards and proposed New Section 306.6 come into effect? If you disagree, please explain why you believe ISO OPP 1305 should not be removed. (b) Other Stakeholders wishing to comment on specific provisions are requested to copy the provision into this area and provide comments. Issued for Stakeholder Consultation: 2013-08-15 Comment # 2: Insert Comments / Reason for Position (if any) Page 2 of 2