Flooding Control Station AD22 LIELBA - www.edibon.com
by user
Comments
Transcript
Flooding Control Station AD22 LIELBA - www.edibon.com
Flooding Control Station LIELBA - AD22 Technical Teaching Equipment www.edibon.com Products Products range Units 4.-Electricity ELEMENTS ALLOCATION SEL21 Flooding tank ALI02 DET11 DET10 Probe 1 Water electro-valve Probe 2 ALI03 Output tank Pump DET03 DET04 DET01 SEL03 Modules: ALI02=Main Power Supply. DET01=Flooding Detector. SEL21=Indoor Siren. ALI03=Auxiliary Power Supply. DET04=Fitted Flooding Detector DET10=Water Electro-valve. DET03=Filted Power Supply. SEL03=3 Pilot-Lights. DET11=Probe for water electro-valve. Worlddidac Member ISO 9000: Quality Management (for Design, Manufacturing, Commercialization and After-sales service) European Union Certificate (total safety) Page 1 Certificates ISO 14000 and ECO-Management and Audit Scheme (environmental management) Worlddidac Quality Charter Certificate (Worlddidac Member) SPECIFICATIONS The complete application is formed by Unit 1 and Unit 2. Unit 1, in metallic box, including the following modules: ALI02. Main Power Supply: Single-phase plug. 2 lamps. Terminals: L (line), N (neutral) and GND (ground). Security mushroom. Removable Key with two positions (ON and OFF) that works as the main switch. ALI03. Auxiliary Power Supply 24 Vac and 24 Vdc adjustable: 230/24 Vac transformer. Outputs: 24Vac, 24Vdc and 24Vdc adjustable. 7 terminals. DET03. Fitted Power Supply: This module is a fitted power supply of 12Vac, required to supply the flooding detector module (DET04). The module has a LED indicator whose purpose is to indicate the state of the power supply. Input voltage: 2 terminals of 230Vac. Output voltage: 2 terminals of 12Vac. 1 GND terminal. Service LED. DET01. Flooding Detector: This module is a flooding detector that alerts to the user in a flooding case. Input voltage: 2 terminals of 230Vac. Frequency: 50/60Hz. Power: 5W. Led and alarm sound. 2 Input probe terminals (the user can connect three probes as a maximum in parallel connection). 4 alarm output terminals (relay output). Connectable to electro-valve. Service led. DET04. Fitted Flooding Detector: This module contains a fitted flooding detector. Input voltage: 2 terminals of 12Vac. 2 Input probe terminals (the user can connect three probes as a maximum in parallel connection). 4 Alarm output terminals (relay output). Service and alarm led. Acoustic alarm. SEL03. 3 Pilot-Lights: 3 Pilot-lamps. Colors: red, yellow and green. Input voltage: 2 terminals each lamp of 24Vac or 24Vdc. SEL21. Indoor Siren: This module consists of a siren and supply terminals. Input voltage: 2 terminals of 24Vdc. Volume configuration through analog signal 12- 24Vdc. 87-112 dB. 12-30 mA. 32 possible tones. Two-pole automatic differential switch and two-pole automatic thermal-magnetic switch for the security of the elements. Unit 2, including : DET10. Water Electro-valve: This contains a water electro-valve. Input voltage: 2 terminals of 24Vac. NC configuration. Automatic reset. DET11. Probe for water electro-valve: The unit includes two probes which are placed in the flooding tank. Water pump: The water pump transports the water until the probe tank. Input voltage: 2 terminals of 5Vdc. Power: 12W. Flooding transparent tank. Output transparent tank. Cables and Accessories, for normal operation. Manuals: This unit is supplied with the following manuals: Required Service, Assembly and Installation, Starting-up, Safety, Maintenance and Practices Manuals. Page 2 www.edibon.com EXERCISES AND PRACTICAL POSSIBILITIES 1.- Checking the main power supply (ALI02). 7.- Real application of the flooding system. 2.- Checking the auxiliary power supply (ALI03). 3.- Checking the pilot-lights module (SEL03). 4.- Checking the fitted power supply module (DET03). 5.- Working mode of flooding detector (DET01). 6.- Working mode of flooding detector (DET04). DIMENSIONS & WEIGHTS REQUIRED SERVICES -Electrical supply: single-phase, 220V./50 Hz or 110V./60 Hz. -Water. Application AD22: Unit 1: -Dimensions: 490 x 450 x 470 mm. approx. (19.29 x 17.72 x 18.50 inch. approx.). -Weight: 10 Kg. approx. (22 pounds approx.). Unit 2: -Dimensions: 400 x 350 x 380 mm. approx. (15.75 x 13.78 x 14.96 inch. approx.). -Weight: 5 Kg. approx. (11 pounds approx.). Page 3 www.edibon.com Additional and optional: CAI. Computer Aided Instruction Software System With no physical connection between the application and computer, this complete package consists on an Instructor + Application Instructor Software Software (INS/SOF) totally integrated with the Student/Application Software. Both are interconnected so that the teacher knows at any Student/ Application Software moment what is the theoretical and practical knowledge of the students. These, on the other hand, get a virtual instructor who helps them to deal with all the information on the subject of study. Examples of the Software screens Instructor Software INS/SOF. Classroom Management Software Package (Instructor Software). The Instructor has a whole range of options, among them: - Organize Students by Classes and Groups. - Create easily new entries or delete them. - Create data bases with student information. - Analyze results and make statistical comparisons. - Print reports. - Develop own examinations. - Detect student ’s progress and difficulties. ...and many other facilities. This Instructor Software working in network configuration allows controlling all the students in the classroom. Student Software A.../SOF Computer Aided Instruction Software (Student/Application Software). It explains how to use the application, run the experiments and what to do at any moment. - The options are presented by pull-down menus and pop-up windows. - This software contains: Theory: that gives the student the theoretical background for a total understanding of the studied subject. Exercises: divided by thematic areas and chapters to check out that the theory has been understood. Guided Practices: presents several practices to be done with the application, showing how to complete the exercises and practices. Exams: set of questions presented to test the knowledge obtained . For more information see CAI catalogue. Click on the following link: www.edibon.com/products/catalogues/en/CAI.pdf Page 4 www.edibon.com Additional and optional: MUAD. Electric Power Data Acquisition System Connections points Data acquisition software (MUAD/SOF) 3 4 “n” Application Electric power interface box (EPIB) Cable to computer (DAB) 2 Data acquisition board Cables to interface 1 Student post MUAD is the perfect link between the application and the PC. MUAD is a continuous data acquisition system with virtual instrumentation, that measures, analyzes and represents the parameters involved in the process. MUAD allows voltage and current acquisition and measurement, data processing, frequency spectrum and all the functions of a digital oscilloscope. We easily connect the Electric Power Interface Box (EPIB) to the application with the supplied cables (there are several connection points placed for it). The EPIB is connected to the PC through the Data Acquisition Board (DAB), and by using the Data Acquisition software with virtual instrumentation, the student can get results from the undertaken experiment/practice, see them on the screen and work with them. MUAD System includes EPIB + DAB + MUAD/SOF: 1)Hardware: 1.1) EPIB. Electric power interface box ( dimensions: 300 x 180 x 120 mm. approx.): Interface that carries out the conditioning of the diverse signals that can be acquired in a process, for their later treatment and visualisation. In the front panel, the elements are separated in two parts: left-hand part for VOLTAGE sensors, and right-hand part for CURRENT sensors. 8 analog input channels. Sampling range: 250KSPS (Kilo samples per second). 4 Tension sensors AC/DC, 400V. 4 Current sensors. 1.2) DAB. Data acquisition board: PCI Data acquisition board (National Instruments) to be placed in a computer slot. Bus PCI. Analog input: Number of channels= 16 single-ended or 8 differential. Resolution=16 bits, 1 in 65536. Sampling rate up to: 250 KSPS (Kilo samples per second). Input range (V)= ± 10V. Data transfers=DMA, interrupts, programmed I/0. Number of DMA channels=6. Analog output: Number of channels=2. Resolution=16 bits, 1 in 65536. Maximum output rate up to: 833 KS/s. Output range(V)=± 10. Data transfers=DMA, interrupts, programmed I/0. Digital Input/Output: Number channels=24inputs/outputs. D0 or DI Sample Clock frequency: 0 to 1 MHz. Timing: Counter/timers=2. Resolution: Counter/timers: 32 bits. 2) MUAD/SOF. Data acquisition software: Data Acquisition Software with Graphic Representation: Friendly graphical frame. Compatible with actual Windows operating systems. Configurable software allowing the representation of temporal evolution of the different signals. Visualization of a tension of the circuits on the computer screen. Sampling velocity up to 250 KSPS. (Kilo samples per second). EPIB DAB MUAD/SOF Software Main Screen 1.- Voltage channels section 2.- Current channels section 3.- Power spectrum section 4.- General control panel section Page 5 www.edibon.com Some working possibilities: 1) CAI + MUAD working possibility (complete EDIBON system) INS/SOF. Instructor Software + + + EPIB. Electric Power Interface Box + DAB. Data Acquisition Board A.../SOF. Student/Application Software + MUAD/SOF. Data Acquisition Software Application (AD22) CAI. Computer Aided Instruction Software System MUAD Electric Power Data Acquisition System 2) MUAD working possibility + EPIB. Electric Power Interface Box + DAB. Data Acquisition Board + MUAD/SOF. Data Acquisition Software Application (AD22) MUAD Electric Power Data Acquisition System 3) CAI working possibility INS/SOF. Instructor Software + + A.../SOF. Student/Application Software Application (AD22) CAI. Computer Aided Instruction Software System 4) Simplest working possibility Application (AD22) *Specifications subject to change without previous notice, due to the convenience of improvements of the product. REPRESENTATIVE: C/ Del Agua, 14. Polígono Industrial San José de Valderas. 28918 LEGANÉS. (Madrid). SPAIN. Phone: 34-91-6199363 FAX: 34-91-6198647 E-mail: [email protected] WEB site: www.edibon.com Issue: ED01/13 Date: January/2013 Page 6