AUTOMATION AND SYSTEMS LABORATORY "................................................................"

ADVANCED
AUTOMATION AND SYSTEMS LABORATORY
(6AD)
* Center:
"................................................................"
* Country: "................................................................"
* Date:
* Issue:
"................................................................"
"................................................................"
Quality Certificates:
Worlddidac
Member
ISO 9000: Quality Management
(for Design, Manufacturing,
Commercialization and After-sales service)
European Union Certificate
(total safety)
Certificates ISO 14000 and
ECO-Management and Audit Scheme
(environmental management)
Worlddidac Quality Charter
Certificate
(Worlddidac Member)
Advanced Automation and Systems Laboratory
(6AD)
Index
- Project content.
- Technical areas available.
- Economical proposal.
- Classroom and Laboratory Lay Out (Example).
- Main teaching units (included in priority 1).
- Main target.
- Project options covered.
- Project conditions.
- Teaching techniques used.
Ref.:6AD-pre(01/11)
Advanced Automation and Systems Laboratory
(6AD)
Project content
Modern design
Main blocks
DESIGNING
MANUFACTURING
COMPLETE
PACKAGE SUPPLYING
TRAINING
Products
Full units design
ELECTRONICS
(ORCAD)
MECHANICAL DESIGN
(AUTOCAD)
CONTROL
APPLICATIONS
DESIGN
(SACED)
MANUALS
DESIGN
(OFFICE)
Ref.:6AD/pre(01/11)
Advanced Automation and Systems Laboratory
(6AD)
Technical areas available
- Electronics.
- Electricity.
*Automation & Systems.
- Process Control.
- Complements, Instruments and Tools.
*Main
area directly related with Advanced Automation and Systems
Laboratory labelled in bold letters.
Note: The complete technical design “is ready” at our premises
Ref.:6AD-pre(01/11)
Advanced Automation and Systems Laboratory
(6AD)
Economical Proposal
Teaching Units:
"Priority 1"
0610: PLC Trainer
0620: PLC Process Emulators Applications Module.
0621: PLC Small Scale Real Applications Module
0633/10S: Industrial PLC (Any) .
0650: Automation & System Module
0651: Automation (Regulation and Control) Module
0652: Automation (Control) Module.
0600/ESN: EDIBON Scada-Net for Automation & Systems units
"Priority 2"
1000. Process Control
1010: Process Control. Basic Module.
1010/PLC: PLC's Module
1011: Process Control. Medium Module
1011/PLC: PLC's Module
1020: Industrial Process Module
1020/PLC: PLC's Module
1000/ESN: EDIBON Scada-Net for Process Control units
"Priority 3"
0200. Electronics
0213-210/10S: Elementary Electronics (10 CAI + CAL)
0213-211/10S: Elementary Electronics (10 CAI + CAL).
0230: Transducers and Sensors Module
0231: Sensors Instrumentation
0240: Control Electronics Module
0400. Electricity
0413-410/10S: Domestic Electric Installations (10 CAI + CAL)
0413-411/10S: Domestic Electric Installations (10 CAI + CAL)
Complements, Instruments and Tools:
5100. Complements, Instruments and Tools
5110-1: Cupboard & Shelves Module
5120-10: Computer Module
5122: Teaching Aids Module
5124: Complete Health & Safety
5142-1: Electricity Toolkit Module
5143-20: Electronics Toolkit Module
Services:
* Furnitures:
* Electrical, Water and Air Installation and others laboratory services
* Installation of all units supplied, Starting up, Training, Teacher Training and Technology Transfe
Ref.:6AD-pre(01/11)
Classroom and Laboratory Lay Out
ADVANCED
AUTOMATION AND SYSTEMS LABORATORY
(Example of Priority 1)
(6AD)
32 cm
EPID/T
OTHER PRIORITIES
Unit
Unit
CEAB
1,4 cm
Unit
CRCI
Unit
CPVMI
SCE
INT
Unit
ROOM 3
1,6 cm
1,5 cm
Web-cam
Computer for each Teaching Unit
Teacher and Student Desk with
computers
Table for Teaching Unit
INT
RYC
PLCE
OTHER PRIORITIES
Unit
Unit
PLC-IN
Unit
SBB
Unit
25 cm
Unit
Teaching Unit
INT
Electronic
Interface
90x40
Cupboard
150x80 cm
48x35 cm
EDIBON ESN SCADA-NET
90x60 cm
80x30
Table office
Shelves
Table
E: 1:100
9 cm
TEACHER
DESK
90x60
CEAC
Unit
Unit
INT
EDIBON
ESN
SCADA-NET
STOCK
90x60
Unit
COMPUTER
CONTROLLED
UNITS
150x80
150x80
150x80
90x60
PROJECTOR
UCP-P
OTHER TEACHING
AND
NON TEACHING UNITS
90x40
90x40
90x40
ROOM 2
MAIN
ELECTRICAL
CABINET
90x60
EMERGENCY DOOR
ROOM 1
MAIN
WATER
CABINET
90x60
2,7 cm
90x40
150x80
06x051
MAIN
AIR
PANEL
90x60
90x40
TOILET
100x40
ELECTRONIC
BLACKBOARD
SERVICES
MANAGER
ROOM
90x60
TOILET
INT
CECI
90x40
150x80
Unit
EXPANSIONS SPACE
SEMINARY
UCP
LOCAL NET
WITH SCADA-NET
SYSTEM
STUDENT
TOILET
STAND ALONG
AND
DANGEROUS
UNITS
OTHER TEACHING
AND
NON TEACHING UNITS
90x40
3,3 cm
Advanced Automation and Systems Laboratory
(6AD)
Main Teaching Units
(included in priority 1 )
Priority 01:
PLCE
PLC Trainer
PLC-IN
PLC Industrial Control System
SCE
Computer Controlled Generating Stations Control and Regulation Simulator (System Engineering).
SBB
Ball and Beam System.
CPVM
DC Motor Position and Speed Control.
RYC
Computer Controlled Teaching Unit for the Study of Regulation and Control.
UCP
Computer Controlled Process Control System (with electronic control valve).
UCP-P
Computer Controlled Process Control Unit for the study of Pressure (Air).
CECI
Industrial Controllers Trainer.
CRCI
Industrial Controllers Networking.
CEAB
Trainer for Field Bus Applications.
CEAC
Controller Tuning Trainer.
EPID/T
Industrial Regulation Trainer, PID type. (Temperature).
Ref.:6AD-pre(01/11)
Advanced Automation and Systems Laboratory
(6AD)
Main target
* To help the students:
- By “quick” understanding.
- By “clear” understanding (clear concepts).
- By “saving” time.
- By “extending” the laboratory to their homes.
* To help the teachers:
- By “easy” teaching.
- By increasing the teaching “efficiency”.
- By “reducing” teaching costs (less time consume).
- By “integrating” classroom and laboratory in the same place.
Ref.:6AD-pre(01/11)
Advanced Automation and Systems Laboratory
(6AD)
Project options covered
This “Advanced Automation and Systems Laboratory” will cover the following:
a) To train students at laboratory.
b) To train trainers.
c) To be used for training and update educators in current teaching
technologies.
d) To give courses to workers in the industry, as it simulates industrial
process.
e) To be used for carrying out applied research, in several processes
and different technical areas.
f)
To be used as research tool for international projects.
g) To train other countries teachers.
Ref.:6AD-pre(01/11)
Advanced Automation and Systems Laboratory
(6AD)
Project conditions
The “Advanced Automation and Systems Laboratory” includes the following
technical and commercial conditions:
a) Technical conditions:
- Laboratories adaptation.
- Installation of all units supplied.
- Starting up for all units.
- Training about the exercises to be done with any unit.
- Teacher training related with the teaching unit and the teaching techniques
used.
- Technology transfer.
b) Commercial conditions:
- Packing.
- Financing Charges.
- C.I.F. Charges.
c) Other conditions:
- 8 Manuals for each teaching equipment:
. Required services manual.
. Assembly and installation manual.
. Interface and software/control console manual.
. Set in operation manual.
. Safety norms manual.
. Practices manual.
. Maintenance manual.
. Calibration manual.
Ref.:6AD-pre(01/11)
TEACHING TECHNIQUES USED
3D. EDIBON THREE DIMENSIONS SYSTEM
Software
Interface
Data acquisiton
board
Unit
Used for:
Physics ( Magnetic fields,
Electrical fields, Mechanics,
Acoustics, Optics,
Thermodynamics and
Fluid Mechanics)
Software included:
-Control
-Data Acquisition
-Data Management
E
x
Q+
CAI. COMPUTER AIDED INSTRUCTION SYSTEM
Software
Teacher
Software
+
Software
Used for:
Basic Electronics and
Electricity.
Communications.
Basic Mechanics.
Basic Fluid Mechanics.
Student
Software
Unit
EDAS. EDIBON DATA ACQUISITION SYSTEM
Software
Interface
Data Acquisition
Software
Data acquisiton
board
Used for:
Basic Electronics.
Communications.
Electricity.
Unit
RTC. EDIBON SYSTEM FOR HIGH ELECTRONICS (Real time control)
Software
Unit
Data
acquisiton
board
Control Software
Option:
Simulation
Software
Used for:
High Tech Electronics
(Control Electronics,
Digital Electronics
and Industrial Electronics).
WEB: www.edibon.com
HYBRID. EDIBON TEACHING HYBRID SYSTEM (ENERGY)
Used for:
Energy
Power
Plants.
Alarms
PHOTOELASTICITY
Used for:
Strength
of
Materials.
Simulation
Unit
RESULTS
Real
Diferences between
the simulation and
the photoelastic
reality.
Some Probes
SACED. EDIBON COMPUTER CONTROL SYSTEM:Control+Data Acquisition+Data Management
Software
Unit
Interface
Data Acquisiton
board
PLC
Used for:
option
Fluid Mechanics.
Aerodynamics.
Thermodymanics
&Thermotechnics.
on ensa on Process
rocess
Process Control. Condensation
Chemical
(ST13, SP-1)
Engineering.
Food Technology.
(ST14, SP-2) (ST12, SP-2)
Water Technology.
Environment.
Evaporation Process
Software included:
-Control
-Data Acquisition
-Data Management
ST-5
D H
hB and Humidity
hC and Humidity
ST-4
D H: This energy is absorbed
by the refrigerant system
ESN. EDIBON SCADA-NET SYSTEM
Used for:
Complex Processes and
Complete Laboratories
WEB: www.edibon.com