THERMODYNAMICS AND THERMOTECHNICS LABORATORY (Phase 2)

THERMODYNAMICS AND THERMOTECHNICS
LABORATORY (Phase 2)
(9AD2)
* Center:
"................................................................"
* Country: "................................................................"
* Date:
* Issue:
"................................................................"
"................................................................"
Quality Certificates:
Worlddidac
Member
ISO 9000: Quality Management
(for Design, Manufacturing,
Commercialization and After-sales service)
European Union Certificate
(total safety)
Certificates ISO 14000 and
ECO-Management and Audit Scheme
(environmental management)
Worlddidac Quality Charter
Certificate
(Worlddidac Member)
Thermodynamics and Thermotechnics Laboratory (Phase 2)
(9AD2)
Index
- Project content.
- Technical areas available.
- Economical proposal.
- Classroom and Laboratory Lay Out.
- Main teaching units.
- Main target.
- Project options covered.
- Project conditions.
- Teaching techniques used.
Ref.:9AD2-pre(01/11)
Thermodynamics and Thermotechnics Laboratory (Phase 2)
(9AD2)
Project content
Modern design
Main blocks
DESIGNING
MANUFACTURING
COMPLETE
PACKAGE SUPPLYING
TRAINING
Products
Full units design
ELECTRONICS
(ORCAD)
MECHANICAL DESIGN
(AUTOCAD)
CONTROL
APPLICATIONS
DESIGN
(SACED)
MANUALS
DESIGN
(OFFICE)
Ref.:9AD2/pre(01/11)
Thermodynamics and Thermotechnics Laboratory (Phase 2)
(9AD2)
Technical areas available
- Thermodynamics & Thermotechnics.
- Complements, Instruments and Tools.
Note: The complete technical design “is ready” at our premises
Ref.:9AD2-pre(01/11)
Thermodynamics and Thermotechnics Laboratory (Phase 2)
(9AD2)
Economical Proposal
Teaching Units:
0900. Thermodynamics & Thermotechnics
0910/10S: Refrigeration Basic Module (10 CAI + CAL)
0910/PLC: PLC's Module
0920/10S: Heat PumpsBasic Module (10 CAI + CAL)
0920/PLC: PLC's Module
0930/10S: Air Conditioning Basic Module (10 CAI + CAL)
0930/PLC: PLC's Module
0933/10S: Air Conditioning Automobile Module (10 CAI + CAL)
0940/10S: Heating Module (10 CAI + CAL)
0940/PLC: PLC's Module
0950/10S: Heat Transfer Basic Module (10 CAI + CAL)
0950/PLC: PLC's Module
0953/10S: Heat Exchange Basic Module (10 CAI + CAL)
0953/PLC: PLC's Module
0990: Engine Test Bench Basic Module
0990/PLC: PLC's Module
Complements, Instruments and Tools:
5100. Complements, Instruments and Tools
5110-1: Cupboard & Shelves Module
5120-10: Computer Module
5122: Teaching Aids Module
5124: Complete Health & Safety
5142-1: Electricity Toolkit Module
5143-20: Electronics Toolkit Module
Services:
* Furnitures:
* Electrical, Water and Air Installation and others laboratory services
* Installation of all units supplied, Starting up, Training, Teacher Training and Technology Transfer
Ref.:9AD2-pre(01/11)
Classroom and Laboratory Lay Out
THERMODYNAMICS AND THERMOTECHNICS LABORATORY (Phase 2)
(9AD2)
32 cm
90x40
150x80
ELECTRONIC
BLACKBOARD
90x60
PROJECTOR
Unit
TFTC
Unit
INT
TTVC
Unit
INT
TBMC8
HTVC
Unit
INT
Unit
INT
OTHER TEACHING
AND
NON TEACHING UNITS
INT
LOCAL NET
WITH SCADA-NET
SYSTEM
EDIBON
ESN
SCADA-NET
TEACHER
DESK
STOCK
COMPUTER
CONTROLLED
UNITS
1,4 cm
90x60
90x60
TCESC
INT
150x80
150x80
150x80
90x40
90x40
90x40
ROOM 2
MAIN
ELECTRICAL
CABINET
90x60
EMERGENCY DOOR
ROOM 1
MAIN
WATER
CABINET
90x60
2,7 cm
90x40
150x80
06x051
MAIN
AIR
PANEL
90x60
90x40
TOILET
100x40
Unit
INT
OTHER TEACHING
AND
NON TEACHING UNITS
SERVICES
MANAGER
ROOM
90x60
TOILET
TPTVC
Unit
9 cm
SEMINARY
TIVAC
EXPANSIONS SPACE
STAND ALONG
AND
DANGEROUS
UNITS
STUDENT
TOILET
90x40
3,3 cm
THAR22C
INT
Unit
ROOM 3
1,6 cm
THA2AC
1,5 cm
Web-cam
Computer for each Teaching Unit
Teacher and Student Desk with
computers
Table for Teaching Unit
INT
Unit
TTLFC
Unit
INT
TCEC
Unit
INT
TCLFC
Unit
INT
TIFCC
INT
Unit
TCCC
INT
Unit
TFEC
Unit
INT
OTHER TEACHING
AND
NON TEACHING UNITS
25 cm
Unit
Teaching Unit
INT
Electronic
Interface
90x40
Cupboard
150x80 cm
48x35 cm
EDIBON ESN SCADA-NET
90x60 cm
80x30
Table office
Shelves
Table
E: 1:100
Thermodynamics and Thermotechnics Laboratory (Phase 2)
(9AD2)
Main Teaching Units
THAR22C
Computer Controlled Air Conditioning + Refrigeration Unit (two condensers (water and air) and two evaporators (water and air))
THA2AC
Computer Controller Air Conditioning Unit, (two condensers (water and air) and one evaporator (air))
TTLFC
Computer Controlled Fluidisation and Fluid Bed Heat Transfer Unit.
TCEC
Computer Controlled Boiling Heat Transfer Unit.
TCLFC
Computer Controlled Free and Forced Convection Heat Transfer Unit.
TIFCC
Computer Controlled Cross Flow Heat Exchanger.
TCCC
Computer Controlled Heat Conduction Unit.
TFEC
Computer Controlled Flow Boiling Demonstration Unit.
TIVAC
Computer Controlled Steam to Water Heat Exchanger.
TPTVC
Computer Controlled Steam Power Plant
TCESC
Computer Controlled Separating & Throttling Calorimeter
TFTC
Computer Controlled Nozzle Performance Test Unit.
TTVC
Computer controlled Steam Turbine.
HTVC
Computer controlled Solar/Heat Source Vapour Turbine.
TBMC8
Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW
Ref.:9AD2-pre(01/11)
Thermodynamics and Thermotechnics Laboratory (Phase 2)
(9AD2)
Main target
* To help the students:
- By “quick” understanding.
- By “clear” understanding (clear concepts).
- By “saving” time.
- By “extending” the laboratory to their homes.
* To help the teachers:
- By “easy” teaching.
- By increasing the teaching “efficiency”.
- By “reducing” teaching costs (less time consume).
- By “integrating” classroom and laboratory in the same place.
Ref.:9AD2-pre(01/11)
Thermodynamics and Thermotechnics Laboratory (Phase 2)
(9AD2)
Project options covered
This “Thermodynamics and Thermotechnics Laboratory (Phase 2)” will cover the following:
a) To train students at laboratory.
b) To train trainers.
c) To be used for training and update educators in current teaching
technologies.
d) To give courses to workers in the industry, as it simulates industrial
process.
e) To be used for carrying out applied research, in several processes and
different technical areas.
f)
To be used as research tool for international projects.
g) To train other countries teachers.
Ref.:9AD2-pre(01/11)
Thermodynamics and Thermotechnics Laboratory (Phase 2)
(9AD2)
Project conditions
The
“Thermodynamics and Thermotechnics Laboratory (Phaseincludes
2)”
the following
technical and commercial conditions:
a) Technical conditions:
- Laboratories adaptation.
- Installation of all units supplied.
- Starting up for all units.
- Training about the exercises to be done with any unit.
- Teacher training related with the teaching unit and the teaching techniques
used.
- Technology transfer.
b) Commercial conditions:
- Packing.
- Financing Charges.
- C.I.F. Charges.
c) Other conditions:
- 8 Manuals for each teaching equipment:
. Required services manual.
. Assembly and installation manual.
. Interface and software/control console manual.
. Set in operation manual.
. Safety norms manual.
. Practices manual.
. Maintenance manual.
. Calibration manual.
Ref.:9AD2-pre(01/11)
TEACHING TECHNIQUES USED
3D. EDIBON THREE DIMENSIONS SYSTEM
Software
Interface
Data acquisiton
board
Unit
Used for:
Physics ( Magnetic fields,
Electrical fields, Mechanics,
Acoustics, Optics,
Thermodynamics and
Fluid Mechanics)
Software included:
-Control
-Data Acquisition
-Data Management
E
x
Q+
CAI. COMPUTER AIDED INSTRUCTION SYSTEM
Software
Teacher
Software
+
Software
Used for:
Basic Electronics and
Electricity.
Communications.
Basic Mechanics.
Basic Fluid Mechanics.
Student
Software
Unit
EDAS. EDIBON DATA ACQUISITION SYSTEM
Software
Interface
Data Acquisition
Software
Data acquisiton
board
Used for:
Basic Electronics.
Communications.
Electricity.
Unit
RTC. EDIBON SYSTEM FOR HIGH ELECTRONICS (Real time control)
Software
Unit
Data
acquisiton
board
Control Software
Option:
Simulation
Software
Used for:
High Tech Electronics
(Control Electronics,
Digital Electronics
and Industrial Electronics).
WEB: www.edibon.com
HYBRID. EDIBON TEACHING HYBRID SYSTEM (ENERGY)
Used for:
Energy
Power
Plants.
Alarms
PHOTOELASTICITY
Used for:
Strength
of
Materials.
Simulation
Unit
RESULTS
Real
Diferences between
the simulation and
the photoelastic
reality.
Some Probes
SACED. EDIBON COMPUTER CONTROL SYSTEM:Control+Data Acquisition+Data Management
Software
Unit
Interface
Data Acquisiton
board
PLC
Used for:
option
Fluid Mechanics.
Aerodynamics.
Thermodymanics
&Thermotechnics.
on ensa on Process
rocess
Process Control. Condensation
Chemical
(ST13, SP-1)
Engineering.
Food Technology.
(ST14, SP-2) (ST12, SP-2)
Water Technology.
Environment.
Evaporation Process
Software included:
-Control
-Data Acquisition
-Data Management
ST-5
D H
hB and Humidity
hC and Humidity
ST-4
D H: This energy is absorbed
by the refrigerant system
ESN. EDIBON SCADA-NET SYSTEM
Used for:
Complex Processes and
Complete Laboratories
WEB: www.edibon.com