MLP8L 3.0x3.0, Packing Drawing

MLP8L 3.0x3.0, Packing Drawing
Packing Description:
MLP8L 3.0x3.0 is classified under Moisture Sensitive Level 1 at 260 0C peak package body temperature.
The carrier tape is made from dissipative polystyrene or polycarbonate resin. The cover tape is a multilayer film primarily
composed of polyester film, adhesive layer, heat activated sealant, and anti-static sprayed agent. These reeled parts in standard
option are shipped with 3000 units per 330 mm diameter reel. The reels is made of polystyrene plastic (anti-static coated or
intrinsic).
These full reels are individually barcode labeled and placed inside a pizza box made of recyclable corrugated brown paper with a
Fairchild logo printing. The reel is packed single reel in the pizza box. And these pizza boxes are placed inside a barcode labeled
shipping box which comes in different sizes depending on the number of parts shipped.
8
2
4
5
3
6
1
ZXYKK
FDMC
• 7200
ZXYKK
FDMC
• 7200
ZXYKK
FDMC
• 7200
Antistatic Cover Tape
7
QFN Package
Pin 1
Static Dissipative
Embossed Carrier Tape
BOXTNR Label
ESD Logo Label
F63TNR Label
Pizza Box printed with FSC Logo
and caution statements.
Dimension: 352mm x 340mm x 35mm
ESD Logo Label sample
F63TNR Label sample
LOT:
PMH010088888
QTY:
FSID: FDMC7200
Electrostatic
Sensitive Devices
Require Proper
Handling Procedures
SPEC:
D/C1: P1215NA QTY1:
D/C2:
3000
QTY2:
Reel No.:
SPEC REV:
Green Component
RoHS
COMPLIANT
2nd Level Interconnect
1. Category G4
2. Maximum safe temperature 260 deg C
3. MSL 1
FAIRCHILD SEMICONDUCTOR
Tape Leader and Trailer Configuration
Carrier Tape
Cover Tape
Trailer Tape 300mm minimum
Components
Leader Tape 500mm minimum
(F63TNR)6.0
MLP Embossed Tape Dimension
Po
T
P2
D
+
+
E
+
F
W
Ko
Bo
Wc
Tc
D1
P1
Ao
User Direction of Feed
Dimensions are in millimeters
Package
MLP08N
Ao
+/-0.10
Bo
+/-0.10
D
+/-0.05
D1
min.
E
+/-0.1
3.30
3.30
1.55
1.5
1.75
F
Ko
+/-0.1 +/-0.1
5.5
0.9
P1
TYP
Po
TYP
P2
+/-0/05
T
TYP
8.0
4.0
2.0
0.3
Tc
W
+/-0.005 +/-0.3
0.07
Wc
TYP
12
9.3
Notes: Ao, Bo, and Ko dimensions are determined with respect to the EIA /Jedec RS-481 rotational and lateral movement
requirements (see sketches A, B, and C).
0.5 mm
200 maximum
maximum
Typical component
cavity center line
Bo
20 deg maximum component rotation
Sketch A (Side or Front Sectional View)
Component Rotation
Shipping Reel Dimension
0.5 mm
maximu
m
Typical component
center line
Sketch C (Top View)
Component lateral movement
Ao
Sketch B (Top View)
Component Rotation
W2 max Measured at Hub
W1 Measured at Hub
B Min
Dia C
Dia A
max
Dia D
min
Dia N
DETAIL AA
See detail AA
W3
Dimensions are in millimeters
Tape Width
12
Dia A
max
Dim B
min
Dia C
+.5/-.2
Dia D
min
Dim N
min
Dim W1
+2/-0
Dim W2
max
Dim W3
(LSL - USL)
330
1.5
13
20.2
178
12.4
18.4
11.9~15.4
MLP8L 3.0x3.0
Packing Configuration
1:1
PKG – MLP08N