3.5-8.0 GHz GaAs MMIC Packaged Low Noise Amplifier L1007-QT Features

3.5-8.0 GHz GaAs MMIC
Packaged Low Noise Amplifier
February 2009 - Rev 20-Feb-09
L1007-QT
Features
12 dB Gain
2 dB Noise Figure
3x3 QFN Package
Single Power Supply
3-5 V, 40 mA Self Bias
On-Chip ESD Protection
Circuit Description
Mimix Broadband’s 3.5 to 8.0 GHz low noise
amplifier is packaged in surface mount 3x3 QFN
package. The device is a self-biased, single supply
design with 12 dB gain and 2 dB noise figure. This
MMIC uses Mimix Broadband’s optical pHEMT
process.
Absolute Maximum Ratings
Supply Voltage
RF Input Power
Storage Temperature (Tstg)
Junction Temperature
Operating Temperature
+6 V
+10 dBm
-55 ºC to +125 ºC
175 ºC
-40 ºC to +85ºC
Operation beyond these conditions may cause permanent damage
to the device.
Electrical Characteristics (T=25ºC)
Parameter
Units
GHz
dB
Frequency Range
Gain
Input Return Loss
Noise Figure
Output P1dB
Output IP3
Supply Voltage
dB
dBm
dBm
V
Min.
3.5
-
Typ.
12
-10
2.0
13.0
25.0
3
Max.
8
-
Typical Parameters at Vdd=5V @ 25ºC
Parameter
Frequency
Gain
NF
OP1dB
OIP3
Current
Condition
Pout=OP1dB-10, 10 MHz Freq Space
Unit
GHz
dB
dB
dBm
dBm
mA
4.0
15.0
1.7
13.0
25.0
44.0
5.0
15.0
1.6
14.0
28.0
44.0
Typical
6.0
7.0
13.5
11.5
1.7
2.0
14.5
14.0
29.0
29.0
44.0
44.0
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
8.0
10.0
2.4
13.0
28.5
44.0
Page 1 of 8
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
www.BDTIC.com/MACOM
3.5-8.0 GHz GaAs MMIC
Packaged Low Noise Amplifier
February 2009 - Rev 20-Feb-09
L1007-QT
Low Noise Amplifier Measurements
XL1007-QT: Noise Figure Vs Voltage
XL1007-QT: Noise Figure Vs Temp @ Vdd=3V
4
4
3.5
3.5
3V
3
3
85C
25C
-40C
4V
2.5
2
NF (dB)
NF (dB)
2.5
5V
1.5
2
1.5
1
1
0.5
0.5
0
0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
Freq. (GHz)
7.5
8.0
8.5
9.0
9.5
10.0
9.5
10.0
XL1007-QT: Noise Figure Vs Temp @ Vdd=5V
XL1007-QT: Noise Figure Vs Temp @ Vdd=4V
4
4
3.5
3.5
3
3
85C
25C
85C
-40C
25C
-40C
2.5
NF (dB)
2.5
NF (dB)
7.0
Freq. (GHz)
2
2
1.5
1.5
1
1
0.5
0.5
0
0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
Freq. (GHz)
7.0
7.5
8.0
8.5
9.0
Freq. (GHz)
XL1007-QT: S-parameters, 5V
XL1007-QT: S11 Vs Voltage
20
0
10
-2
0
-4
-6
S11 (dB)
(dB)
-10
-20
-30
-8
-10
S11
-12
S21
-14
S22
-16
S12
-18
Vdd=3V
Vdd=4V
-40
Vdd=5V
-50
-60
-20
-70
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
Freq. (GHz)
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
Freq. (GHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 8
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
www.BDTIC.com/MACOM
3.5-8.0 GHz GaAs MMIC
Packaged Low Noise Amplifier
February 2009 - Rev 20-Feb-09
L1007-QT
Low Noise Amplifier Measurements (cont.)
XL1007-QT: S11 Vs Temp @ 4V
0
-2
-2
-4
-4
-6
-6
S11 ( dB )
S11 ( dB )
XL1007-QT: S11 Vs Temp @ 3V
0
-8
-10
-12
-8
-10
-12
-40°C
-40°C
-14
-14
25°C
25°C
-16
-16
85°C
85°C
-18
-18
-20
-20
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
3.5
10
4
4.5
5
5.5
6
6.5
XL1007-QT: S11 Vs Temp @ 5V
7.5
8
8.5
9
9.5
10
XL1007-QT: S22 Vs Voltage
0
0
-2
-2
-4
-4
-6
-6
S22 ( dB )
S11 ( dB )
7
Freq. (GHz)
Freq. (GHz)
-8
-10
-12
-8
Vdd=3V
-10
-12
Vdd=4V
-40°C
-14
-14
25°C
Vdd=5V
-16
-16
85°C
-18
-18
-20
-20
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
10
0
1
2
3
4
5
6
7
8
Freq. (GHz)
XL1007-QT: S22 Vs Temp @ 3V
10 11 12 13 14 15 16 17 18 19 20
XL1007-QT: S22 Vs Temp @ 4V
0
0
-2
-2
-4
-4
-6
-6
S22 ( dB )
S22 ( dB )
9
Freq. (GHz)
-8
-10
-12
-8
-10
-12
-40°C
-40°C
-14
-14
25°C
25°C
-16
-16
85°C
85°C
-18
-18
-20
-20
3.5
4
4.5
5
5.5
6
6.5
7
Freq. (GHz)
7.5
8
8.5
9
9.5
10
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
Freq. (GHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 8
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
www.BDTIC.com/MACOM
10
3.5-8.0 GHz GaAs MMIC
Packaged Low Noise Amplifier
February 2009 - Rev 20-Feb-09
L1007-QT
Low Noise Amplifier Measurements (cont.)
XL1007-QT: S22 Vs Temp @ 5V
XL1007-QT: S21 Vs Voltage
0
-2
-4
S21 ( dB )
S22 ( dB )
-6
-8
-10
-12
-40°C
-14
25°C
-16
85°C
-18
-20
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
18
17
16
15
14
13
12
11
10
9
8
7
6
5
10
Vdd=3V
Vdd=4V
Vdd=5V
3.5
4
4.5
5
5.5
6
Freq. (GHz)
-40°C
25°C
85°C
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
7.5
8
8.5
9
9.5
18
17
16
15
14
13
12
11
10
9
8
7
6
5
9.5
10
10
-40°C
25°C
85°C
3.5
4
4.5
5
5.5
6
Freq. (GHz)
6.5
7
7.5
8
8.5
9
9.5
10
9.5
10
Freq. (GHz)
XL1007-QT: OIP3 Vs Temp @ 4V, Pout/tone = P1dB - 10dB
XL1007-QT: S21 Vs Temp @ 5V
32
18
17
16
15
14
13
12
11
10
9
8
7
6
5
30
-40°C
28
25°C
26
OIP3 (dBm)
S21 ( dB )
7
XL1007-QT: S21 Vs Temp @ 4V
S21 ( dB )
S21 ( dB )
XL1007-QT: S21 Vs Temp @ 3V
18
17
16
15
14
13
12
11
10
9
8
7
6
5
3.5
6.5
Freq. (GHz)
85°C
24
22
20
18
-40°C
16
25°C
85°C
14
12
3.5
4
4.5
5
5.5
6
6.5
7
Freq. (GHz)
7.5
8
8.5
9
9.5
10
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
Freq (GHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 8
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
www.BDTIC.com/MACOM
3.5-8.0 GHz GaAs MMIC
Packaged Low Noise Amplifier
February 2009 - Rev 20-Feb-09
L1007-QT
Low Noise Amplifier Measurements (cont.)
XL1007-QT: OIP3 Vs Voltage
32
30
30
28
28
26
26
OIP3 (dBm)
OIP3 (dBm)
XL1007-QT: OIP3 Vs Temp @ 5V, Pout/tone = P1dB - 10dB
32
24
22
20
18
24
22
20
18
-40°C
16
25°C
85°C
Vdd=3V
16
14
Vdd=4V
Vdd=5V
14
12
12
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
10
3.5
4
4.5
5
5.5
6
Freq (GHz)
6.5
7
7.5
8
8.5
9
9.5
10
8.5
9
9.5
10
8.5
9
9.5
10
Freq (GHz)
XL1007-QT: OIP3 Vs Voltage
XL1007-QT: P1dB Vs Temp @ 3V
32
18
30
16
28
P1dB (dBm)
OIP3 (dBm)
14
26
24
22
20
12
10
8
18
6
Vdd=3V
16
Vdd=4V
Vdd=5V
-40°C
25°C
85°C
4
14
12
2
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
10
3.5
4
4.5
5
5.5
6
Freq (GHz)
XL1007-QT: P1dB Vs Temp @ 4V
7
7.5
8
XL1007-QT: P1dB Vs Temp @ 5V
18
18
16
16
14
14
P1dB (dBm)
P1dB (dBm)
6.5
Freq (GHz)
12
10
8
6
12
10
8
6
-40°C
25°C
85°C
-40°C
4
25°C
85°C
4
2
2
3.5
4
4.5
5
5.5
6
6.5
7
Freq (GHz)
7.5
8
8.5
9
9.5
10
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
Freq (GHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 8
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
www.BDTIC.com/MACOM
3.5-8.0 GHz GaAs MMIC
Packaged Low Noise Amplifier
February 2009 - Rev 20-Feb-09
L1007-QT
Evaluation Board Layout
Package Pin-out Table
Pin Designator
1,2,4,5,6,7,8,9,
11,12,14,15,16
3
10
13
Description
NC
RF Input
RF Output
Vd
Evaluation Board Schematic
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 6 of 8
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
www.BDTIC.com/MACOM
3.5-8.0 GHz GaAs MMIC
Packaged Low Noise Amplifier
February 2009 - Rev 20-Feb-09
L1007-QT
Package Outline and Assembly
PIN 1
INDICATOR
A
D
A2
E
0.00-0.05
A3
RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS
NOTE:
1. ALL DIMENSIONS ARE IN mm
1.00
±.005
2.00 ±.05
1.40 ±.05
(4 SIDES)
4.00 ±.05
PACKAGE OUTLINE
A
A3
A2
b
K
D
E
e
D2
E2
L
MIN
0.80
0
0.20
0.20
1.50
1.50
0.16
NOM
0.90
0.20 REF
0.65
0.25
3.00 BSC
3.00 BSC
0.50
1.65
1.65
0.26
MAX
1.00
1.00
0.30
-
1.80
1.80
0.36
0.30 ±.005
0.50
BSC
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 7 of 8
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
www.BDTIC.com/MACOM
3.5-8.0 GHz GaAs MMIC
Packaged Low Noise Amplifier
February 2009 - Rev 20-Feb-09
L1007-QT
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Ordering Information
Part Number for Ordering
XL1007-QT-0G00
XL1007-QT-0G0T
XL1007-QT-EV1
Description
Matte Tin finished RoHS compliant 3x3 QFN in bulk quantity
Matte Tin finished RoHS compliant 3x3 QFN in tape and reel
Evaluation Board
We also offer this part with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager for more
information regarding different plating types.
XL1007-BD-000X Where “X” is RoHS compliant die packed in “V” –vacuum released gel paks or “W” –waffle trays.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 8 of 8
Characteristic Data and Specifications are subject to change without notice. ©2009 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
www.BDTIC.com/MACOM