FMS2020-001 10W GaAs WIDEBAND SPDT SWITCH Features Product Description

FMS2020-001
FMS2020-001
10W GaAs
Wideband
SPDT Switch
10W GaAs WIDEBAND SPDT SWITCH
NOT FOR NEW DESIGNS
Package: 3mmx3mm QFN
Product Description
Features
„
„
„
„
GaAs HBT
V2
V1
GaAs MESFET
SiGe BiCMOS
RF2
RF1
Si BiCMOS
„
DE
InGaP HBT
SiGe HBT
GaAs pHEMT
Si CMOS
Si BJT
RF MEMS
FO
R
LDMOS
Parameter
Min.
Specification
Typ.
Max.
WiMax
L-, S-, and C-band Digital Cellular
WLAN Applications
Unit
Electrical Specifications
Insertion Loss
„
„
NE
GaN HEMT
InP HBT
Operates from a Single Positive Voltage
Less than 10μA Control Current at 35dBm Input Power
Applications
„
W
9
„
ANT
Optimum Technology
Matching® Applied
High Isolation: 25dB Typ. at
2.5GHz
Low Insertion Loss: 0.5dB
Typ. at 2.5GHz
Low Insertion Loss: 1.0dB
Typ. at 6GHz
P1dB 42dBm at 5GHz
SI
GN
S
The FMS2020-001 is a 10-Watt, low loss, single-pole, dual-throw, Gallium Arsenide
antenna switch. The die is fabricated using the RFMD FL05 0.5μm switch process
technology, which offers leading edge performance optimized for switch applications. The FMS2020-001 is designed for use in WiMax, L-, S-, and C-band wireless
applications and WLAN access points where high linearity switching is required.
Condition
TAMBIENT =25°C, VCTRL =0V/2.7V, ZIN =ZOUT =50Ω
PIN at 0.1dB Compression Point
0.4
0.6
0.75
18
16
29
25
18
41
PIN at 0.5dB Compression Point
39.5
38.5
>42
dBm
dBm
dBm
2.5GHz
5.0GHz
2.5GHz
2nd Harmonic Level
3rd Harmonic Level
40.5
Δ0.5
>69
>66
-74
-77
dBm
%
dBm
dBm
dBc
dBc
5.0GHz
35dBm at 5GHz (OFDM WLAN 54)
1GHz
2GHz
1GHz, PIN =+35dBm, 100% duty cycle
1GHz, PIN =+35dBm, 100% duty cycle
Switching Speed: TRISE, TFALL
<300
ns
10% to 90% RF and 90% to 10% RF
Switching Speed: TON, TOFF
<800
ns
50% control to 90% RF and 50% control to 10%
RF
+20dBm RF input @ 3.8GHz
NO
T
Return Loss
Isolation
27
22
EVM (Contribution Due to Switch)
OIP3
Control Current
1.5
0.5
0.75
-69
-70
3
dB
dB
dB
dB
dB
dB
dB
dB
dBm
1.0GHz
3.5GHz
5.0GHz
0.5GHz to 2.5GHz
2.5GHz to 5.0GHz
1.0GHz
2.5GHz
6.0GHz
1.0GHz
μA
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc.
DS100122
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
www.BDTIC.com/RFMD
1 of 6
FMS2020-001
Absolute Maximum Ratings1
Parameter
Rating
Maximum Input Power (PIN)
+41
Control Voltage (VCTRL)
Operating Temperature (TOPER)
Storage Temperature (TSTOR)
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied.
dBm
+6
V
-40 to 85
°C
125
°C
-55 to 150
°C
Maximum Junction Temperature
(TJMAX)
Caution! ESD sensitive device.
Unit
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
SI
GN
S
Notes:
At high powers, the dissipation in the switch can be significant and the resulting
thermal effects need to be taken in to account. The device should be mounted
with appropriate heat sinking to take this into account.
The maximum allowable junction temperature is TJMAX =125°C and for the thermal
calculation, the dissipation within the switch should be taken as η = 5.5%. This
should include the power input to the switch and anything reflected back from
an external mismatch.
The thermal resistance of the FET should be taken as RTH =70°C/W.
TJ =TOP +PIN .η. RTH, where TJ < TJMAX
VC1
VC2
A
B
High
Low
Low
High
ANT - RF1
ANT - RF2
Insertion loss
Isolation
Isolation
Insertion Loss
W
Switch State
DE
Truth Table
NE
General Test Conditions
Bias Voltages
Port Impedances
Off-Arm Termination
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice.
Low=0V to 0.2V, High=2.5V to 5V
50Ω
50Ω
NO
T
FO
R
Note: External DC blocking capacitors are required on all RF ports (typ: 47pF). All unused ports terminated in 50Ω.
2 of 6
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
www.BDTIC.com/RFMD
DS100122
FMS2020-001
Typical Measured Performance on Evaluation Board (De-embedded)
Measurement Conditions: VCTRL =2.5V (high) and 0V (low), TAMBIENT =25°C unless otherwise stated.
Insertion Loss vs Frequency
Isolation versus Frequency
0. 0
-10
-15
-0. 5
(dB)
(dB)
-20
-1. 0
-25
SI
GN
S
-30
-1. 5
-35
-2. 0
1
2
3
4
5
-40
6
( GHz)
2
3
4
5
6
(GHz)
Return Loss vs Frequency
Power Loss* vs Input Power
2. 0
DE
0
-10
W
(dB)
NE
-30
Var iable
S11
S22
-40
1
2
3
4
1. 0
0. 5
0. 0
25. 0
6
27.5
30. 0
32.5
35.0
(dBm)
37.5
40. 0
Pow er Los s* =(Large S ignal Los s - S mall S ignal Loss )
NO
T
FO
R
(GHz)
5
(dB)
1. 5
-20
-50
1
DS100122
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
www.BDTIC.com/RFMD
3 of 6
FMS2020-001
SI
GN
S
Part Identification
Pad Layout
V1
Pin 1
12
ANT
V2
11
10
RF1
PADDLE
8
7
3
5
6
RF2
Description
NC
NC
RF1
NC
NC
NC
RF2
NC
NC
V2
ANT RF
V1
Ground
Package Drawing
QFN 12-Lead 3mmx3mm
NO
T
FO
R
NE
4
W
2
DE
9
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Paddle
4 of 6
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
www.BDTIC.com/RFMD
DS100122
FMS2020-001
W
DE
SI
GN
S
Evaluation Board Layout
Bill of Materials
NE
Label
C3, C4
C1, C2, C7
C5, C6
Capacitor, 470pF, 0603
Capacitor, 100pF, 0402
Capacitor, 47pF, 0402
Preferred evaluation board material is 0.25mm thick ROGERS RT4350. All RF tracks should be 50Ω characteristic impedance.
FO
R
Board
Component
Evaluation Board De-embedding Data (Measured)
Insertion Loss vs Frequency
Return Loss vs Frequency
0
-10
NO
T
0.0
-20
( dB)
(dB)
-0.5
-1.0
-30
Variab le
S 11
S 22
-1.5
-40
-2.0
1
2
3
4
(GHz)
5
6
-50
1
2
3
4
5
6
( GHz)
Tape and Reel
Tape and reel information on this material is in accordance with EIA-481-1 except where exceptions are identified.
DS100122
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
www.BDTIC.com/RFMD
5 of 6
FMS2020-001
Preferred Assembly Instructions
This package is compatible with both lead-free and leaded solder reflow processes as defined within IPC/JEDEC J-STD-020.The
maximum package temperature should not exceed 260°C.
Handling Precautions
To avoid damage to the devices, care should be exercised during handling. Proper Electrostatic Discharge (ESD) precautions should be observed at all stages of storage, handling,
assembly, and testing.
SI
GN
S
ESD Rating
These devices should be treated as Class 1A (250V to 500V) as defined in JEDEC Standard No. 22-A114. Further information
on ESD control measures can be found in MIL-STD-1686 and MIL-HDBK-263.
MSL Rating
Application Notes and Design Data
DE
The device has an MSL rating of Level 2. To determine this rating, prefonditioning was performed to the device per the Pb-Free
solder profile defined within IPC/JEDEC J-STD-020C, Moisture/Reflow sensitivity classification for non-hermetic solid state surface mount devices.
W
Application Notes and design data including S-parameters are available on request from www.RFMD.com.
Reliability
NE
A MTTF of 4.2 million hours at a channel temperature of 150°C is achieved for the process used to manufacture this device.
Disclaimers
FO
R
This product is not designed for use in any space-based or life-sustaining/supporting equipment.
Ordering Information
NO
T
Delivery Quantity
6 of 6
Ordering Code
Reel of 1000
FMS2020-001
Reel of 100
FMS2020-001SR
Bag of 25
FMS2020-001SQ
Bag of 5
FMS2020-001SB
Packaged Die Mounted on Evaluation Board
FMS2020-001-EB
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
www.BDTIC.com/RFMD
DS100122