D-SUBMINIATURE Adam Technologies, Inc. RIGht ANGle .318" [8.08] moUNt

D-SUBMINIATURE
RIGht ANGle .318" [8.08] moUNt
Adam Technologies, Inc.
dPl & dSl SeRIeS
iNTRoDuCTioN:
Adam Tech Right Angle PCB mount .318” footprint D-Sub connectors
are a popular interface for many I/O applications. Offered in 9, 15,
25 and 37 positions they are a good choice for a low cost industry
standard connection. These connectors are manufactured with
precision stamped contacts offering a choice of contact plating and a
wide selection of mating and mounting options.
FeATuReS:
Industry standard compatibility
Durable metal shell design
Precision formed contacts
Variety of Mating and mounting options
MATiNg CoNNeCToRS:
Adam Tech D-Subminiatures and all industry standard
D-Subminiature connectors.
SPeCiFiCATioNS:
Material:
Standard insulator: PBT, 30% glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T
Insulator color: Black
Contacts: Phosphor Bronze
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate on mating
area. Tin over copper underplate on PCB tails.
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Temperature Rating:
Operating temperature: -55°C to +105°C
Soldering process temperature:
Standard insulator: 235°C
Hi-Temp insulator: 260°C
oRDeRiNg iNFoRMATioN
DB25
Sl
2
Shell SiZe/
PoSiTioNS
De09 = 9 Position
DA15 = 15 Position
DB25 = 25 Position
DC37 = 37 Position
CoNTACT TYPe
Pl = Plug, .318" Footprint
Sl = Socket, .318" Footprint
4
MATiNg FACe
MouNTiNg oPTioNS
3 = #4-40 fixed jackscrews
4 = #4-40 flush threaded
inserts
5 = #4-40 flush threaded
inserts with removable
jackscrews installed
6 = .120" non-threaded
mounting holes
* See Mounting Option
diagrams pg. 77
PCB MouNTiNg oPTioNS
1 = Wrap around ground
straps with thru holes
2 = Forked board locks
3 = Top side only ground
straps with thru holes
4 = Top side only ground
straps with #4-40
threaded screw holes
* See Mounting Option
PACkAgiNg:
Anti-ESD plastic trays
diagrams pg. 77
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
RoHS
US
C
E
COMPLIANT
2002 / 95 / EC
HI-TEMP
INSULATOR
®
AVA I L A B L E
oPTioNS:
Add designator(s) to end of part number
15 = 15 µin gold plating in contact area
30 = 30 µin gold plating in contact area
eMi = Ferrite filtered version for EMI/RFI suppression
lPJ = Loose packed jackscrews
F = Superior retention 4 prong boardlocks
hT = Hi-Temp insulator for Hi-Temp soldering processes
up to 260°C
R = Round jackscrews
PF = Press fit pins
http://www.BDTIC.com/ADAM-TECH 75
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
RIGht ANGle .318" [8.08] moUNt
Adam Technologies, Inc.
dPl & dSl SeRIeS
plug
C
B
A
#4-40 UNC
.232 [5.9]
.109 [2.77]
.494 [12.55]
.329 [8.36]
.125 [3.18]
.112
[2.84]
.720 [18.3]
.318 [8.08]
DB25-Pl-25
soCkeT
C
B
A
.109 [2.77]
#4-40 UNC
.232 [5.9]
.494 [12.55]
.311 [7.90]
.125 [3.18]
.112
[2.84]
.720 [18.3]
.318 [8.08]
DB25-Sl-24
Unit: Inch [mm]
B
ø.047 [ø1.19]
Press
Fit Pins
.109 [2.77]
ø.126 [ø3.20]
2X
.112
[2.84]
Recommended PCB layout
76
PLUG
SOCKET
A
A
B
C
9
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
15
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
25
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
37
2.182 [55.43]
2.159 [54.84]
2.500 [63.50]
2.729 [69.32]
Pos.
DIMENSIONS
Press Fit option
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
RIGht ANGle .318" [8.08] moUNtING oPtIoNS
Adam Technologies, Inc.
MATINg FACE & PCB MOUNTINg OPTIONS
OPTION 13
OPTION 14
OPTION 15
ø.126 Thru Hole
Wrap Around
Ground Strap
#4-40 Fixed Jackscrew
ø.126 Thru Hole
ø.126 Thru Hole
OPTION 16
Wrap Around
Ground Strap
#4-40 Threaded Insert
OPTION 23
FORKED BOARD
LOCK
ø.126 Thru Hole
#4-40 Threaded Insert with
Removable Jackscrew
OPTION 23-R
OPTION 27
Wrap Around
Ground Strap
#4-40 Rivited Round Jackscrew (Shown)
#4-40 Rivited Hex Jackscrew (Not Shown)
FORKED BOARD
LOCK
Wrap Around
Ground Strap
ø.120 Thru Hole
#4-40 Fixed Jackscrew
#4-40 Rivited Round Jackscrew
* Standard Stocked Item
OPTION 24
OPTION 24-F
FORKED BOARD
LOCK
OPTION 25
FORKED BOARD
LOCK
4 PRONG
BOARD LOCK
#4-40 Threaded Insert
Removable Jackscrew
#4-40 Threaded
Insert
#4-40 Threaded Insert
* Standard Stocked Item
* Standard Stocked Item
OPTION 33
OPTION 26
OPTION 34
FORKED BOARD
LOCKS
ø.126 Thru Hole
#4-40 Fixed Jackscrew
ø.120 Thru Hole
OPTION 35
Top Side Ground
Strap
#4-40 Threaded Insert with Top Side Ground
Strap
Removable Jackscrew
#4-40 Threaded
Hole
#4-40 Threaded Insert
Top Side Ground
Strap
Top Side Ground
Strap
#4-40 Threaded
Hole
ø.126 Thru Hole
Top Side Ground
Strap
ø.120 Thru Hole
OPTION 45
OPTION 44
#4-40 Threaded Insert
OPTION 43
OPTION 36
ø.126 Thru Hole
ø.126 Thru Hole
#4-40 Fixed Jackscrew
Top Side Ground
Strap
OPTION 46
#4-40 Threaded
Hole
#4-40 Threaded Insert with
Removable Jackscrew
Top Side Ground
Strap
#4-40 Threaded
Hole
ø.120 Thru Hole
Top Side Ground
Strap
http://www.BDTIC.com/ADAM-TECH 77
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
RIGht ANGle .590" [15.00] moUNt
Adam Technologies, Inc.
dPQ & dSQ SeRIeS
iNTRoDuCTioN:
Adam Tech Right Angle PCB mount .590” footprint D-Sub
connectors are a popular interface for many I/O applications. Offered
in 9, 15, 25 and 37 positions they are an excellent choice for a low
cost industry standard connection. They are available with full or half
size PCB side mounting flanges. Adam Tech connectors are
manufactured with precision stamped contacts offering a choice of
contact plating and a wide selection of mating and mounting options.
FeATuReS:
Half or Full flange options
Industry standard compatibility
Durable metal shell design
Precision formed contacts
Variety of Mating and mounting options
MATiNg CoNNeCToRS:
Adam Tech D-Subminiatures and all industry standard
D-Subminiature connectors.
SPeCiFiCATioNS:
Material:
Standard insulator: PBT, 30% glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T
Insulator Color: Black
Contacts: Phosphor Bronze
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate.
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max. Initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Temperature Rating:
Operating temperature: -55°C to +105°C
Soldering process temperature:
Standard insulator: 235°C
Hi-Temp insulator: 260°C
PACkAgiNg:
Anti-ESD plastic trays
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
US
C
E
78
RoHS
COMPLIANT
2002 / 95 / EC
HI-TEMP
INSULATOR
®
AVA I L A B L E
oRDeRiNg iNFoRMATioN
DB25
SQ
SA
Shell SiZe/
PoSiTioNS
De09 = 9 Position
DA15 = 15 Position
DB25 = 25 Position
DC37 = 37 Position
CoNTACT TYPe
PQ = Plug,
.590" Footprint
SQ = Socket,
.590" Footprint
oPTioNS:
Add designator(s) to end of part number
15 = 15 µin gold plating in
contact area
30 = 30 µin gold plating in
contact area
eMi = Ferrite filtered version
for EMI/RFI suppression
lPJ = Loose packed jackscrews
F = Superior retention 4 prong
boardlocks
hT = Hi-Temp insulator for
Hi-Temp soldering
processes up to 260°C
R = Round jackscrews
4
MATiNg FACe
MouNTiNg oPTioNS
3 = #4-40 fixed jack screws
4 = #4-40 flush threaded
inserts
5 = #4-40 flush threaded
inserts with removable
jack screws installed
6 = .120" non-threaded
mounting holes
* See Mounting Option
diagrams page 80
PCB MouNTiNg
oPTioNS
SA = Wrap around
ground straps
with thru holes
on half flange
SB = Wrap around
ground straps
with thru holes
on full flange
SC = Top side only
ground straps
with thru holes
on half flange
SD = Top side only
ground straps
with thru holes
on full flange
F = Forked boardlocks
on half flange
R = Forked boardlocks
on full flange
* See Mounting Option
diagrams page 80
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
RIGht ANGle .590" [15.00] moUNt
Adam Technologies, Inc.
dPQ & dSQ SeRIeS
See pg. 80 for Mounting options
plug
C
B
A
.109 [2.77]
#4-40 UNC
.232 [5.9]
.494 [12.55]
.329 [8.36]
.125
[3.18]
.112 [2.84]
.990 [25.15]
.590 [15.00]
DB25-PQ-SB4
soCkeT
C
B
A
.109 [2.77]
#4-40 UNC
.311 [7.90]
.232 [5.9]
.494 [12.55]
.125
[3.18]
.112 [2.84]
.990 [25.15]
.590 [15.00]
DB25-SQ-R5
Unit: Inch [mm]
Pos.
9
PLUG
SOCKET
A
A
B
C
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
DIMENSIONS
15
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
25
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
37
2.182 [55.43]
2.159 [54.84]
2.500 [63.50]
2.729 [69.32]
half Flange PCB layout for
PCB mounting options
(SA, SC, F)
ø.109
[2.77]
.112
[2.84]
ø.126
[3.20]
Full Flange PCB layout
for PCB mounting options
(SB, SD, R)
ø.047
[1.19]
ø.109
[2.77]
ø.126
[3.20]
.275
[6.98]
ø.047
[1.19]
.112
[2.84]
B
B
PCB edge
http://www.BDTIC.com/ADAM-TECH 79
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
Adam Technologies, Inc.
RIGht ANGle .590" [15.00] moUNtING oPtIoNS
MATINg FACE & PCB MOUNTINg OPTIONS
OPTION SA4
OPTION SA3
ø.126 Thru Hole
OPTION SA5
ø.126 Thru Hole
Wrap Around Ground
Strap on Half Flange
#4-40 Fixed Jackscrew
#4-40 Threaded Insert
ø.126 Thru Hole
Wrap Around Ground
Strap on Half Flange
OPTION SB4
OPTION SB3
OPTION SA6
ø.126 Thru Hole
ø .126 Thru Hole
Wrap Around Ground
Strap on Half Flange
ø .120 Thru Hole
OPTION SB5
ø.126 Thru Hole
Wrap Around Ground
Strap on Full Flange
#4-40 Fixed Jackscrew
OPTION SB6
ø.126 Thru Hole
Wrap Around Ground
Strap on Half Flange
#4-40 Threaded Insert with
Removable Jackscrew
#4-40 Threaded Insert
Wrap Around Ground
Strap on Full Flange
OPTION SC3
ø.126 Thru Hole
ø.126 Thru Hole
#4-40 Threaded Insert with
Removable Jackscrew
Wrap Around Ground
Strap on Full Flange
OPTION SC5
OPTION SC4
#4-40 Threaded Insert
Top Side Ground
Strap, Half Flange
Top Side Ground
Strap, Half Flange
OPTION SD6
OPTION SD5
#4-40 Threaded Insert
ø.126 Thru Hole
Top Side Ground
Strap, Full Flange
OPTION F3
Top Side Ground
Strap, Full Flange
ø.120 Thru Hole
#4-40 Threaded Insert with
Removable Jackscrew
Half Flange
OPTION R5
Full
Flange
Forked Board
Lock
Half Flange
OPTION R3
Half Flange
Forked Board
Lock
Full
Flange
#4-40 Fixed Jackscrew
OPTION R6
Forked Board
Lock
#4-40 Threaded Insert with
Removable Jackscrew
Half Flange
#4-40 Threaded Insert
Forked Board
Lock
ø.120 Thru Hole
Forked Board
Lock
Top Side Ground
Strap, Full Flange
OPTION F4
#4-40 Fixed Jackscrew
OPTION F6
Forked Board
Lock
#4-40 Threaded Insert
#4-40 Threaded Insert with
Removable Jackscrew
Forked Board
Lock
ø.126 Thru Hole
Top Side Ground
Strap, Half Flange
ø.120 Thru Hole
ø.126 Thru Hole
Top Side Ground
Strap, Full Flange
#4-40 Fixed Jackscrew
80
ø.126 Thru Hole
#4-40 Threaded Insert with
Removable Jackscrew
ø.126 Thru Hole
OPTION R4
OPTION SC6
OPTION SD4
OPTION SD3
Top Side Ground
Strap, Half Flange
#4-40 Fixed Jackscrew
ø.126 Thru Hole
ø.126 Thru Hole
OPTION F5
Wrap Around Ground
Strap on Full Flange
ø.120 Thru Hole
Full
Flange
Forked Board
Lock
ø.120 Thru Hole
Full
Flange
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
ComBINAtIoN SIGNAl wIth CoAX oR PoweR
Adam Technologies, Inc.
dSC SeRIeS
iNTRoDuCTioN:
Adam Tech Combination Signal/Coax D-Sub connectors are a
popular interface for many mixed signal I/O applications. Offered in
five shell sizes they are a good choice for a low cost industry standard
connection that requires utilization of standard signal and high
performance, low impedance signals either in signal-coax or signal power choices. Adam Tech connectors are manufactured with
precision stamped standard signal contacts and precision turned coax
contacts. These connectors are manufactured with precision stamped
contacts offering a choice of contact plating and a wide selection of
mating and mounting options.
electrical:
Operating voltage: 250V AC / DC max.
Signal Current rating: 5 Amps max.
High Power contact current rating: 20 or 40 Amps.
Coaxial Impedance: 50Ω (75Ω optional)
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
oRDeRiNg iNFoRMATioN
D13w3
Pb
RoHS
COMPLIANT
2002 / 95 / EC
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
®
E
Shell CoNFiguRATioNS
1W1
2W2
5W5
5W1
3W3
7W2
9W4
8W8
13W3
11W1
13W6
17W5
21W4
25W3
36W4
17W2
21W1
24W7
27W2
43W2
Shell
CoNFiguRATioNS
D1W1, D2W2, D3W3,
D5W1, D5W5, D7W2,
D8W8, D9W4N,
D11W1, D13W3,
D13W6, D17W2,
D17W5, D21W1,
D21W4, D24W7,
D25W3, D27W2,
D36W4, D43W2
®
US
C
SlP
1
2
CuRReNT RATiNg
SIGNAL- COAX
1 = 50 Ohm
2 = 75 Ohm
SIGNAL-POWER
3 = 10 Amps
4 = 20 Amps
5 = 30 Amps
6 = 40 Amps
7 = 50 Amps
MouNTiNg RighT ANgle
1 = 120" non-threaded
TYPe
mounting holes,
SIGNAL-COAX
no bracket
PT = Plug, Straight PCB
2 = Short Bracket with
ST = Socket, Straight PCB
#4-40 flush threaded
Pl = Plug, Right Angle PCB
inserts in mounting
Sl = Socket, Right Angle PCB
holes
PD = Plug, Solder Cup
2A = Short Bracket with
SD = Socket, Solder Cup
#4-40 flush threaded
SIGNAL-POWER
inserts in mounting
PTP= Plug, Straight PCB,
holes Jack Screws
Power Contacts
installed
STP= Socket, Straight PCB,
3 = Long Bracket with
Power Contacts
#4-40 flush threaded
PlP= Plug, Right Angle PCB,
inserts in mounting
Power Contacts
holes
SlP= Socket, Right Angle
3A = Long Bracket with
PCB, Power Contacts
#4-40 flush threaded
PDP= Plug, Solder Cup
inserts in mounting
Power Contacts
holes Jack Screws
SDP = Socket, Solder Cup
installed
Power Contacts
MouNTiNg STRAighT
JS = Riveted #4-40 Jack
Screws on top of flange
Sl = Riveted #4-40 clinch
nuts on bottom of flange
Bl = Riveted Board Locks
http://www.BDTIC.com/ADAM-TECH 81
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
ComBINAtIoN SIGNAl & CoAX
Adam Technologies, Inc.
dSC SeRIeS
plug - RighT ANgle PCB MouNT SigNAl-CoAX
2.088 [53.04]
1.852 [47.04]
1.533 [38.96]
.494
[12.55]
soCkeT - RighT ANgle PCB MouNT SigNAl -CoAX
.236
[6.00]
.494
[12.55]
.329 [8.36]
.456
[11.60]
#4-40 THREADED
HOLES
.100 [2.54]
.200 [5.08]
.350
[8.89]
.519
[13.20]
.570
[14.48]
2.088 [53.04]
1.852 [47.04]
1.511 [38.38]
Shown as
plug - STRAighT PCB MouNT SigNAl-CoAX
#4-40 THREADED
HOLES
.570
[14.48]
2.088 [53.04]
1.852 [47.04]
.236
[6.00]
.311 [7.90]
ø.120 [3.05]
.570
[14.48]
ø.120 [3.05]
Shown as D13w3-PT-1-1
Available in muiltiple
shell configurations
and mounting options
plug - STRAighT SolDeR CuP SigNAl-CoAX
.570
[14.48]
2.088 [53.04]
.329 [8.36]
.570
[14.48]
ø.120 [3.05]
Shown as D13w3-PD-1-1
Available in muiltiple
shell configurations
and mounting options
82
Shown as D13w3-ST-1-1
Available in muiltiple
shell configurations
and mounting options
1.852 [47.04]
.236
[6.00]
1.533 [38.96]
.570
[14.48]
.570
[14.48]
soCkeT - STRAighT SolDeR CuP SigNAl-CoAX
2.088 [53.04]
1.852 [47.04]
.494
[12.55]
.236
[6.00]
1.511 [38.38]
.494
[12.55]
.329 [8.36]
.570
[14.48]
D13w3-Sl-1-3-Bl
soCkeT - STRAighT PCB MouNT SigNAl-CoAX
2.088 [53.04]
.494
[12.55]
Shown as
With .350" footprint
and .338" bracket.
Also available with
.425" bracket.
.570
[14.48]
1.852 [47.04]
1.533 [38.96]
.100 [2.54]
.200 [5.08]
.350
[8.89]
.519
[13.20]
With .350" footprint
and .338" bracket.
Also available with
.425" bracket.
.570
[14.48]
.311 [7.90]
.456
[11.60]
D13w3-Pl-1-3-Bl
.236
[6.00]
.236
[6.00]
1.511 [38.38]
.494
[12.55]
.311 [7.90]
.570
[14.48]
.570
[14.48]
ø.120 [3.05]
Shown as D13w3-SD-1-1
Available in muiltiple
shell configurations
and mounting options
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
ComBINAtIoN SIGNAl & PoweR
Adam Technologies, Inc.
dSC SeRIeS
soCkeT - RighT ANgle PCB MouNT SigNAl-PoweR
plug - RighT ANgle PCB MouNT SigNAl-PoweR
2.088 [53.04]
1.852 [47.04]
1.533 [38.96]
.494
[12.55]
.236
[6.00]
.494
[12.55]
.329 [8.36]
.456
[11.60]
2.088 [53.04]
1.852 [47.04]
1.511 [38.38]
#4-40 THREADED
HOLES
.570
[14.48]
.311 [7.90]
ø.120 [3.05]
.456
[11.60]
.350
[8.89]
.519
[13.20]
Shown as
D13w3-PlP-3-3-Bl
plug - STRAighT PCB MouNT SigNAl-PoweR
.350
[8.89]
.519
[13.20]
With .350" footprint
and .456" bracket.
Also available with
.425" footprint
and .338" bracket.
.570
[14.48]
.570
[14.48]
2.088 [53.04]
1.852 [47.04]
.236
[6.00]
.311 [7.90]
ø.120 [3.05]
.570
[14.48]
ø.120 [3.05]
Shown as D13w3-PTP-3-1
Available in muiltiple
shell configurations
and mounting options
plug - STRAighT SolDeR CuP SigNAl-PoweR
2.088 [53.04]
1.852 [47.04]
.236
[6.00]
.329 [8.36]
.570
[14.48]
.570
[14.48]
Shown as D13w3-STP-3-1
Available in muiltiple
shell configurations
and mounting options
soCkeT - STRAighT SolDeR CuP SigNAl-PoweR
2.088 [53.04]
1.533 [38.96]
.393 [10.00]
.570
[14.48]
.570
[14.48]
1.852 [47.04]
.494
[12.55]
.236
[6.00]
1.511 [38.38]
.494
[12.55]
.329 [8.36]
.570
[14.48]
D13w3-SlP-3-3-Bl
soCkeT - STRAighT PCB MouNT SigNAl-PoweR
2.088 [53.04]
.494
[12.55]
Shown as
With .350" footprint
and .456" bracket.
Also available with
.425" footprint
and .338" bracket.
.570
[14.48]
1.852 [47.04]
1.533 [38.96]
.236
[6.00]
.494
[12.55]
ø.120 [3.05]
Shown as D13w3-PDP-3-1
Available in muiltiple
shell configurations
and mounting options
.236
[6.00]
1.511 [38.38]
.311 [7.90]
.570
[14.48]
.393 [10.00]
.570
[14.48]
ø.120 [3.05]
Shown as D13w3-SDP-3-1
Available in muiltiple
shell configurations
and mounting options
http://www.BDTIC.com/ADAM-TECH 83
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
RIGht ANGle .197" [5.00] SlImlINe
Adam Technologies, Inc.
dPN & dSN SeRIeS
iNTRoDuCTioN:
Adam Tech Right Angle Slimline PCB tail D-Sub connectors are a
popular interface for many I/O applications. Offered in 9, 15 and 25
positions they are an excellent choice for a low cost industry standard
connection and are ideal for low profile design requirements. Adam
Tech connectors are manufactured with precision stamped contacts
offering a choice of contact plating and a wide selection of mating
and mounting options.
FeATuReS:
Short profile space saving design
Industry standard compatibility
Durable metal shell design
Precision formed contacts
Variety of Mating and mounting options
MATiNg CoNNeCToRS:
Adam Tech D-Subminiatures and all industry standard
D-Subminiature connectors.
SPeCiFiCATioNS:
Material:
Standard insulator: PBT, 30% glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T
Insulator Color: Black
Contacts: Phosphor Bronze
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate overall.
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Temperature Rating:
Operating temperature: -55°C to +105°C
Soldering process temperature:
Standard insulator: 235°C
Hi-Temp insulator: 260°C
oRDeRiNg iNFoRMATioN
DB25
Shell SiZe/
PoSiTioNS
De09 = 9 Positions
DB25 = 25 Positions
hD15 = High Density
15 Positions
SN
24
MouNTiNg oPTioNS
24 = Forked Boardlocks
for PCB Retention and
#4-40 threaded inserts
in mounting holes
25 = Forked Boardlocks
for PCB retention and
#4-40 threaded inserts
in mounting holes with
installed jackscrews
CoNTACT / TYPe
PN = Plug, .197" Slimline
SN = Socket, .197" Slimline
PACkAgiNg:
Anti-ESD plastic trays
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
US
C
E
84
RoHS
COMPLIANT
2002 / 95 / EC
HI-TEMP
INSULATOR
®
AVA I L A B L E
oPTioNS:
Add designator(s) to end of part number
15 = 15 µin gold plating in contact area
30 = 30 µin gold plating in contact area
lPJ = Loose packed jackscrews
hT = Hi-Temp insulator for Hi-Temp soldering
processes up to 260°C
R = Round jackscrews installed
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
RIGht ANGle .197" [5.00] SlImlINe
Adam Technologies, Inc.
dPN & dSN SeRIeS
plug
C
B
A
#4-40 UNC
2X
.109 [2.77]
.112 [2.84]
.232 [5.9]
.329 [8.36]
.494 [12.55]
.125 [3.18]
.200 [5.08]
B
.109 [2.77]
.585 [14.85]
.100 [2.54]
(2X)ø.126 [3.20]
ø.047 [1.20]
Recommended PCB layout
soCkeT
C
B
A
#4-40 UNC
2X
.109 [2.77]
.112 [2.84]
.232 [5.9]
.311 [7.90]
.494 [12.55]
.125 [3.18]
.200 [5.08]
B
.109 [2.77]
.585 [14.85]
.100 [2.54]
(2X)ø.126 [3.20]
ø.047 [1.20]
Recommended PCB layout
Unit: Inch [mm]
PLUG
SOCKET
A
A
B
C
9
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
15
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
25
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
Positions
DIMENSIONS
http://www.BDTIC.com/ADAM-TECH 85
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
RIGht ANGle Smt .118" [3.00] SlImlINe
Adam Technologies, Inc.
Smt SeRIeS
iNTRoDuCTioN:
Adam Tech Right Angle SMT Slimline D-Sub connectors are a
popular interface for many I/O applications. Offered in 9, 15 and 25
positions they are an excellent choice for a low cost industry standard
connection and are ideal for low profile design requirements. Adam
Tech connectors are manufactured with precision stamped contacts
offering a choice of contact plating and a wide selection of mating
and mounting options.
FeATuReS:
Short profile space saving design
Industry standard compatibility
Durable metal shell design
Precision formed contacts
Variety of Mating and mounting options
MATiNg CoNNeCToRS:
Adam Tech D-Subminiatures and all industry standard
D-Subminiature connectors.
SPeCiFiCATioNS:
Material:
Insulator: Hi-Temperature thermoplastic, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze or Brass
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate on mating
area, Tin over Copper underplate on SMT tails.
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 1 Amp max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Temperature Rating:
Operating temperature: -55°C to +105°C
Soldering process temperature: 260°C
oRDeRiNg iNFoRMATioN
DB25
Shell SiZe/
PoSiTioNS
De09 = 9 Positions
DB25 = 25 Positions
hDl15 = High Density
15P
SS
24
MouNTiNg oPTioNS
24 = Forked Boardlocks
for PCB Retention and
#4-40 threaded inserts
in mounting holes
25 = Forked Boardlocks
for PCB retention and
#4-40 threaded inserts
in mounting holes with
installed jackscrews
CoNTACT / TYPe
PS = Plug Surface Mount
SS = Socket Surface Mount
PACkAgiNg:
Anti-ESD plastic trays
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
RoHS
US
C
COMPLIANT
2002 / 95 / EC
HI-TEMP
INSULATOR
®
oPTioNS:
Add designator(s) to end of part number
15 = 15 µin gold plating in contact area
30 = 30 µin gold plating in contact area
R = Round jackscrews
AVA I L A B L E
E
86
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
RIGht ANGle Smt .118" [3.00] SlImlINe
Adam Technologies, Inc.
Smt SeRIeS
9p plug
.984
[24.99]
.626
[15.90]
.436
[11.08]
1.213 [30.81]
.984 [24.99]
.145 X .031
[3.70 X 0.80]
9 PLCS
#4-40 THD
.643
[16.33]
.494
.329
[8.36] [12.55]
.112 [2.84]
ø.059
[1.50]
ø.120
[ø3.05]
.054
[1.385]
.095
[2.41]
Recommended PCB layout
.015
[0.381]
ø.055 [1.40]
.236
[6.00]
.118 [3.00]
.095
[2.41]
.436
[11.08]
.054
[1.385]
De09-PS-25
De09-SS-24
HD15 soCkeT
1.213 [30.81]
.145 X .012
[3.70 X 0.30]
15 PLCS
.984 [24.99]
.643
[16.33]
.984
[24.99]
.608
[15.46]
.420
[10.68]
#4-40 THD
ø.059
[1.50]
ø.120
[ø3.05]
.118 [3.0]
.025
[0.65]
.0948 [2.41]
.494
.311
[7.90] [12.55]
.078 [1.98]
.090
[2.29]
ø.055
[1.40]
.030
[0.76]
Recommended PCB layout
.608
[15.46]
.015
[0.381]
.236
[6.00]
.118 [3.00]
.094
[2.41]
.420
[10.68]
.030
[0.76]
hDl15-SS-25
25p plug
1.852 [47.04]
2.088 [53.04]
1.852 [47.04]
1.498 [38.06]
#4-40 THD
ø.059
[1.50]
1.308 [33.24]
1.534 [38.96]
ø.120
[ø3.05]
PCB EDGE
.494
.329
[8.36] [12.55]
.112 [2.84]
.095
[2.41]
.145 X .031
[3.70 X 0.80]
.054
[1.385]
1.498 [38.06]
ø.055
[1.40]
.015
[0.381]
.236
[6.00]
.118 [3.00]
.095
[2.41]
1.308 [33.24]
.054
[1.385]
DB25-PS-24
http://www.BDTIC.com/ADAM-TECH 87
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
RIGht ANGle wIth mAChINed CoNtACtS
Adam Technologies, Inc.
dPh & dSh SeRIeS
iNTRoDuCTioN
Adam Tech Right Angle .283" footprint D-Sub connectors with Screw
Machine Contacts are a popular interface for many I/O applications.
Offered in 9, 15, 25 and 37 positions they are a good choice for a
high reliability industry standard connection. These connectors are
manufactured with precision machine turned contacts and offer an
exceptional high reliability connection. They are available in a choice
of contact plating and a wide selection of mating and mounting
options.
DB25-Sh-C-2-B
FeATuReS:
Exceptional Machine Contact connection
Industry standard compatibility
Durable metal shell design
Precision turned screw machined contacts
Variety of Mating and mounting options
DB25-Ph-C-3-AM
DB25-Ph-C-1-C
oRDeRiNg iNFoRMATioN
MATiNg CoNNeCToRS:
Adam Tech D-Subminiatures and all industry standard
D-Subminiature connectors.
SPeCiFiCATioNS:
Material:
Standard insulator: PBT, 30% glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T rated UL94V-0
Insulator Colors: White (Black optional)
Contacts: Phosphor Bronze
Shell: Steel, Tin plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate.
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Temperature Rating:
Operating temperature: -55°C to +105°C
Soldering process temperature:
Standard insulator: 235°C
Hi-Temp insulator: 260°C
PACkAgiNg:
Anti-ESD plastic trays
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
US
C
E
88
RoHS
COMPLIANT
2002 / 95 / EC
HI-TEMP
INSULATOR
®
AVA I L A B L E
DB25
Sh
C
Shell SiZe/
PoSiTioNS
De09
DA15
DB25
DC37
DD50
=
=
=
=
=
9 Positions
15 Positions
25 Positions
37 Positions
50 Positions
CoNTACT TYPe
Ph = Plug, Right
Angle Machined
Contact
Sh = Socket, Right
Angle Machined
Contact
FooTPRiNT
DiMeNSioN
C = .283" Footprint
g = .370" Footprint
F = .545" Footprint
PCB MouNTiNg
oPTioN
1 = Without Bracket
2 = Bracket with forked
boardlock
3 = Bracket with .120"
PCB mounting hole
oPTioNS:
Add designator(s) to end of part number
15 = 15 µin gold plating in contact area
30 = 30 µin gold plating in contact area
Bk = Black insulator
hT = Hi-Temp insulator for Hi-Temp
soldering processes up to 260°C
1
C
MATiNg FACe
MouNTiNg oPTioNS
WITH BRACKET
MOUNTING
A = Full plastic
bracket with
#4-40 Threaded
Inserts
B = Full plastic
bracket with
#4-40 Threaded
Inserts with
removable
Jackscrews
AM = Metal brackets
with #4-40
Threaded
Inserts
BM = Metal brackets
with #4-40
Threaded
Inserts with
removable
Jackscrews
WITHOUT BRACKET
MOUNTING
C = .120"
Non-Threaded holes
D = #4-40
Rear Clinch Nut
e = #4-40 Clinch Nut
with removable
Jackscrews
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
RIGht ANGle wIth mAChINed CoNtACtS
Adam Technologies, Inc.
dPh & dSh SeRIeS
PCB MouNTiNg oPTioNS
plug
C
B
A
#4-40 UNC
.235
[5.97]
.329 .494
[8.36] [12.55]
option 1: without Bracket
.125
[3.18]
.112
[2.84]
"X"
.112 [2.84]
.405
[10.28]
option 2: Bracket with Board lock
"X" = FOOTPRINT DISTANCE
C = .283 [7.20] FOOTPRINT
G = .370 [9.40] FOOTPRINT
F = .545 [13.84] FOOTPRINT
ø.120
[3.05]
D
Choice of Plastic or Metal Bracket
Metal Bracket version shown
option 3: Bracket with .120'' Mounting hole
MATiNg FACe MouNTiNg oPTioNS
soCkeT
C
B
A
#4-40 UNC
ø.120
[3.05]
.235
[5.97]
.494
.329
[8.36] [12.55]
option C: .120'' Mounting hole
.125
[3.18]
.112
[2.84]
#4-40
UNC
X
.112 [2.84]
.405
[10.28]
ø.120
[3.05]
D
#4-40
UNC
"X" = FOOTPRINT DISTANCE
C = .283 [7.20] FOOTPRINT
G = .370 [9.40] FOOTPRINT
F = .545 [13.84] FOOTPRINT
option e: #4-40 Threaded insert
with removable Jack Screws
Choice of Plastic or Metal Bracket
Metal Bracket version shown
B
B
D
.109
[2.77]
option D: #4-40 Rear Clinch Nut
.112
[2.84]
D
.112
[2.84]
.112 [2.84]
.109
[2.77]
ø.043 [1.09]
ø.125 [3.18]
ø.125 [3.18]
ø.043 [1.09]
Recommended PCB layout 50 Position
Recommended PCB layout 9, 15, 25 & 37 Position
Unit: Inch / mm
Positions
PLUG
DIMENSIONS
SOCKET
A
A
9
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
.436 [11.08]
15
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
.763 [19.39]
25
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
1.310 [33.24]
37
2.182 [55.43]
2.159 [54.84]
2.500 [63.50]
2.729 [69.32]
1.963 [49.86]
50
2.790 [52.80]
2.016 [52.34]
2.402 [61.00]
2.646 [67.20]
1.744 [44.32]
B
C
D
http://www.BDTIC.com/ADAM-TECH 89
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
IdC FlAt CABle teRmINAtIoN
Adam Technologies, Inc.
dPF & dSF SeRIeS
iNTRoDuCTioN:
Adam Tech Flat Cable IDC D-Sub connectors are a popular interface
for many I/O and cable assembly applications. Offered in 9, 15, 25,
37 and 50 positions they are an excellent choice for a low cost
industry standard connection that terminates .050” flat cable quickly,
easily and compactly. These connectors are manufactured with
precision stamped contacts offering a choice of contact plating and a
wide selection of mating and mounting options.
FeATuReS:
Quickly terminates to flat cable
Industry standard compatibility
Durable metal shell design
Integral strain relief available
Precision formed contacts
Variety of Mating and mounting options
MATiNg CoNNeCToRS:
Adam Tech D-Subminiatures and all industry standard
D-Subminiature connectors.
SPeCiFiCATioNS:
Material:
Insulator: PBT, 30% glass reinforced, rated UL94V-0
Insulator Colors: Black (Blue optional)
Contacts: Phosphor Bronze
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate, Nickel
over copper underplate on IDC area
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Recommended cable size: 28 to 30 Awg.
Temperature Rating:
Operating temperature: -55°C to +105°C
oRDeRiNg iNFoRMATioN
DB25
SF
Shell SiZe/
PoSiTioNS
De09 = 9 Position
DA15 = 15 Position
DB25 = 25 Position
DC37 = 37 Position
DD50 = 50 Position
CoNTACT TYPe
PF = Plug, IDC
SF = Socket, IDC
Strain Relief
Part No.:
DSR-09 = 9 Position
DSR-15 = 15 Position
DSR-25 = 25 Position
DSR-37 = 37 Position
DSR-50 = 50 Position
PACkAgiNg:
Anti-ESD plastic trays
M
2
MouNTiNg oPTioNS
1 = .130" mounting holes
2 = #4-40 threaded
flush inserts
(Metal Shell only)
BoDY
CoNSTRuCTioN
M = Metal shell
P = All plastic body
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
oPTioNS:
Pb
®
RoHS
US
C
COMPLIANT
2002 / 95 / EC
®
Add designator(s) to end of part number
15 = 15 µin. gold in contact area
30 = 30 µin. gold in contact area
Bu = Blue color insulator
E
90
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
IdC FlAt CABle teRmINAtIoN
Adam Technologies, Inc.
dPF & dSF SeRIeS
plug
C
B
A
#4-40 Thread or
.130ø [3.30] Thru-Hole
.327
[8.30]
.112 [2.84]
.492
[12.50]
.109
[2.77]
Metal Shell or
All Plastic
.232 [5.90]
.232 [5.90]
D
soCkeT
C
B
A
#4-40 Thread or
.130ø [3.30] Thru-Hole
.492
[12.50]
.311
[7.90]
.112 [2.84]
.109
[2.77]
Metal Shell or
All Plastic
.232 [5.90]
.232 [5.90]
D
Unit: Inch [mm]
Positions
PLUG
SOCKET
A
A
DIMENSIONS
B
C
D
9
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
.883 [22.44]
15
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
1.213 [30.81]
25
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
1.755 [44.57]
37
2.182 [55.43]
2.159 [54.84]
2.500 [63.50]
2.729 [69.32]
2.414 [61.32]
http://www.BDTIC.com/ADAM-TECH 91
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
SoldeR CUP teRmINAtIoN
Adam Technologies, Inc.
dPd & dSd SeRIeS
iNTRoDuCTioN:
Adam Tech Solder Cup D-Sub connectors are a popular interface for
many I/O applications. Offered in 9, 15, 25, 37 and 50 positions, they
are an excellent choice for a low cost industry standard connection.
These connectors are manufactured with precision stamped contacts,
and offer a wide selection of mating and mounting options. Adam Tech
Solder Cup connectors can be soldered to cable ends or mounted
directly to a PCB card edge.
FeATuReS:
Cable or edge card mounting
Industry standard compatibility
Durable metal shell design
Precision formed contacts
Mating and mounting options
MATiNg CoNNeCToRS:
Adam Tech D-Subminiatures and all industry standard
D-Subminiature connectors.
SPeCiFiCATioNS:
Material:
Insulator: PBT, 30% glass reinforced, rated UL94V-0
Insulator Colors: Black (White optional)
Contacts: Phosphor Bronze
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate underall.
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Temperature Rating:
Operating temperature: -55°C to +105°C
oRDeRiNg iNFoRMATioN
DB25
PD
Shell SiZe/
PoSiTioNS
De09 = 9 Position
DA15 = 15 Position
DB25 = 25 Position
DC37 = 37 Position
DD50 = 50 Position
Sl
MouNTiNg oPTioNS
Blank = .120" Mounting Holes
Sl = Bottom Side
Riveted, #4-40
clinch nuts
JS = Top Side
Riveted, #4-40
Jack Screws
CoNTACT TYPe
PD = Solder Cup, Plug
SD = Solder Cup, Socket
PACkAgiNg:
Anti-ESD plastic trays
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
US
C
E
92
RoHS
COMPLIANT
2002 / 95 / EC
®
oPTioNS:
Add designator(s) to end of part number
15 = 15 µin gold plating in contact area
30 = 30 µin gold plating in contact area
eMi = Ferrite filtered version for EMI / RFI
suppression (Page 114)
wT = White Color Insulator
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
SoldeR CUP teRmINAtIoN
Adam Technologies, Inc.
dPd & dSd SeRIeS
mounTing opTions
plug
#4-40 THREAD
C
B
A
.112
[2.84]
.329 [8.36]
.157 [4.0]
.494
[12.55]
Sl option
Bottom side riveted #4-40
Clinch Nuts
ø.118 [ 3.0]
#4-40 THREAD
.031 [0.8]
.228 [5.8]
.236 [6.0]
.433
[11.0]
JS option
.421 [10.70]
D
Top side riveted #4-40
Jack Screws
soCkeT
C
B
A
.112
[2.84]
.311 [7.90]
.494
[12.55]
ø.118 [ 3.0]
.236 [6.0]
.433
[11.0]
.031 [0.8]
.421 [10.70]
D
Unit: Inch [mm]
Positions
PLUG
SOCKET
A
A
B
C
D
DIMENSIONS
9
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
.756 [19.20]
15
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
1.091 [27.70]
25
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
1.618 [41.10]
37
2.182 [55.43]
2.159 [54.84]
2.500 [63.50]
2.729 [69.32]
2.256 [57.30]
50
2.079 [52.81]
2.064 [52.43]
2.406 [61.11]
2.637 [67.00]
2.169 [55.10]
http://www.BDTIC.com/ADAM-TECH 93
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
CRImP ANd PoKe SyStem
Adam Technologies, Inc.
dPR / dSR SeRIeS
iNTRoDuCTioN:
Adam Tech Crimp and Poke D-Sub connectors are a popular
interface for many I/O applications. Offered in 9, 15, 25, 37 and 50
positions they are a low cost alternative to soldering a connector to
cable. Contacts are crimped onto discrete wires and pushed into the
connector body. The connector is comprised of a metal shell and
plastic insulator and is available with a variety of mating options. The
contacts are precision stamped and are available in a variety of
platings.
FeATuReS:
Low cost no solder alternative
Industry standard compatibility
Durable metal shell design
Precision formed contacts
Variety of Mating and mounting options
MATiNg CoNNeCToRS:
Adam Tech D-Subminiatures and all industry standard
D-Subminiature connectors.
oRDeRiNg iNFoRMATioN
houSiNg
SPeCiFiCATioNS:
Material:
Insulator: PBT, 30% glass reinforced, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate.
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
CoNTACT TYPe
PR = Plug, Crimp and Poke
SR = Socket, Crimp and Poke
CoNTACTS
DCP
PACkAgiNg:
Anti-ESD plastic trays
CoNTACT
wiRe RANge
DCP = Plug
Contact
DCS = Socket
Contact
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
E
94
RoHS
US
C
Sl
MouNTiNg oPTioNS
Blank = .120" diameter
mounting holes
Sl = Riveted #4-40
clinch nuts
JS = Riveted #4-40
jackscrews
Shell SiZe/
PoSiTioNS
De09 = 9 Position
DA15 = 15 Position
DB25 = 25 Position
DC37 = 37 Position
DD50 = 50 Position
Temperature Rating:
Operating temperature: -55°C to +105°C
®
SR
DB25
COMPLIANT
2002 / 95 / EC
®
01
R
PACkAgiNg
R = 10,000 piece
reel
CoNTACT TYPe
01 = 24-26 AWG
02 = 20-22 AWG
03 = 28-30 AWG
oPTioNS:
Add designator(s) to end of part number
15 = 15 µin gold plating in contact area on crimp contacts
30 = 30 µin gold plating in contact area on crimp contacts
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
CRImP ANd PoKe hoUSINGS & CoNtACtS
Adam Technologies, Inc.
dPR / dSR SeRIeS
plug Housing
C
B
A
.109 [2.77]
ø.118 [3.0]
.329 [8.36]
.494 [12.55]
.112 [2.84]
mounTing opTions
10°
.232 [5.9]
.433 [11.0]
.031 [0.8]
.157 [4.0]
.260 [6.60]
D
Sl option
.283 [7.18]
Bottom side riveted #4-40
Clinch Nuts
.421 [10.70]
soCkeT Housing
C
B
A
.109 [2.77]
ø.118 [3.0]
.311 [7.90]
.228 [5.8]
JS option
.494 [12.55]
Top side riveted #4-40
Jack Screws
.112 [2.84]
10°
See Dimension table pg. 81
.232 [5.9]
.433 [11.0]
.031 [0.8]
.260 [6.60]
D
.283 [7.18]
plug CRimp ConTACTs
ø.039
[1.00]
.065
[1.66]
B
A
B
A
.118
[3.0]
soCkeT CRimp ConTACTs
.084
[2.14]
.743 [18.87]
.084
[2.14]
.067 [1.70]
.089
[2.26]
B
SEC A-A
.324
[8.24]
.421 [10.70]
.089
[2.26]
.076
[1.95]
.
.070
[1.75]
.060
[1.54]
SEC B-B
B
A
B
A
.367 [9.32]
.733 [18.62]
.118
[3.0]
SEC A-A
.070
[1.75]
.060
[1.54]
SEC B-B
http://www.BDTIC.com/ADAM-TECH 95
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
FlUSh moUNt StRAIGht PCB tAIl
Adam Technologies, Inc.
dPA & dSA SeRIeS
iNTRoDuCTioN:
Adam Tech Flush Mount Straight PCB tail D-Sub connectors are a
popular interface for many limited space I/O applications. Offered in
9, 15 and 25 positions they are an excellent choice for a low cost
industry standard connection and are ideal for low profile design
requirements. Adam Tech connectors are manufactured with
precision stamped contacts offering a choice of contact plating and a
wide selection of mating and mounting options.
FeATuReS:
Low profile space saving design
Industry standard compatibility
Durable metal shell design
Precision formed contacts
Variety of Mating and mounting options
MATiNg CoNNeCToRS:
Adam Tech D-Subminiatures and all industry standard
D-Subminiature connectors.
SPeCiFiCATioNS:
Material:
Standard insulator: PBT, 30% glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T
Insulator Color: Black
Contacts: Phosphor Bronze
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate overall.
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max. Initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Temperature Rating:
Operating temperature: -55°C to +105°C
Soldering process temperature:
Standard insulator: 235°C
Hi-Temp insulator: 260°C
PACkAgiNg:
Anti-ESD plastic trays
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
RoHS
US
C
COMPLIANT
2002 / 95 / EC
HI-TEMP
INSULATOR
®
AVA I L A B L E
oRDeRiNg iNFoRMATioN
DB25
SA
Shell SiZe/
PoSiTioNS
De09 = 9 Position
DA15 = 15 Position
DB25 = 25 Position
DC37 = 37 Position
CoNTACT TYPe
PA = Plug, Flush mount,
Straight PCB Tail
SA = Socket, Flush Mount,
Straight PCB Tail
M2
MouNTiNg oPTioNS
M1 = Thru Hole Mounting
M2 = #4-40 Threaded
mounting holes
M1-R3 = Riveted Round
Jackscrews on top
side
M2-R-Bl = Riveted Round
Jackscrews on top
side with Boardlocks
underneath
M2-JS = #4-40 Threaded
Holes with
removable
Jackscrews
M2-Bl = Riveted #4-40
Internal Threaded
Standoffs with
Boardlocks
M2-Bl-JS = Removable
Jackscrews with
Boardlocks
oPTioNS:
Add designator[s] to end of part number
15 = 15 µin gold plating in contact area
30 = 30 µin gold plating in contact area
PF = Press Fit Pins
hT = Hi-Temp insulator for hi-temp soldering
processes up to 260°C
E
96
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
FlUSh moUNt StRAIGht PCB tAIl
Adam Technologies, Inc.
dPA & dSA SeRIeS
mounTing opTions
plug
ø.120
[ø3.05]
M1 option
C
B
A
Thru-Hole
Mounting
[2X] ø.118 [3.05]
.109 [2.77]
.329 [8.36]
.494 [12.55]
#4-40
Threaded
Insert
M2 option
Threaded Hole
Mounting
.112 [2.84]
.242 [6.15]
.031 [0.8]
.232 [5.9]
.236 [6.00]
.189 [4.80]
M2-JS
Threaded Hole
Mounting with
removable
Jack Screws
Removable
Jackscrew
.025 [0.64]
soCkeT
C
B
A
M1-R3
M2-R-Bl
Riveted Round
Jackscrews
Riveted Round
Jackscrews with Boardlock
[2X] ø.118 [3.05]
.109 [2.77]
.494 [12.55]
.311 [7.90]
M2-Bl
M2-Bl-JS
#4-40 Threaded
Insert with Boardlock
Removable Jackscrew
with Boardlock
.112 [2.84]
.242 [6.15]
.031 [0.8]
.232 [5.9]
.236 [6.00]
.189 [4.80]
Press Fit PCB
Tail option
.025 [0.64]
B
.109 [2.77]
Unit: Inch [mm]
PLUG
SOCKET
A
A
B
C
9
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
15
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
25
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
Positions
DIMENSIONS
.112 [2.84]
ø.039 [1.0]
2X ø.126 [3.20]
Recommended PCB layout
http://www.BDTIC.com/ADAM-TECH 97
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
StRAIGht & wIRe wRAP PCB tAIl
Adam Technologies, Inc.
dPt, dSt, dPe & dSe SeRIeS
iNTRoDuCTioN:
Adam Tech Straight PCB tail D-Sub connectors are a popular
interface for many I/O applications. Offered in 9, 15, 25, 37 and 50
positions they are an excellent choice for a low cost, sturdy, full metal
body industry standard connection. These connectors are
manufactured with precision stamped or machined turned contacts
offering a choice of contact plating and a wide selection of mating
and mounting options.
FeATuReS:
Industry standard compatibility
Durable metal shell design
Precision formed contacts
Variety of Mating and mounting options
MATiNg CoNNeCToRS:
Adam Tech D-Subminiatures and all industry standard
D-Subminiature connectors.
SPeCiFiCATioNS:
Material:
Standard insulator: PBT, 30% glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T
Insulator Colors: Black (White optional)
Contacts: Phosphor Bronze
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate overall
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Temperature Rating:
Operating temperature: -55°C to +105°C
Soldering process temperature:
Standard insulator: 235°C
Hi-Temp insulator: 260°C
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
US
C
E
98
RoHS
COMPLIANT
2002 / 95 / EC
ST
DB25
Shell SiZe/
PoSiTioNS
De09 = 9 Position
DA15 = 15 Position
DB25 = 25 Position
DC37 = 37 Position
DD50 = 50 Position
CoNTACT TYPe
PT = Plug, Straight PCB
Tail, Standard Profile
ST = Socket, Straight
PCB Tail, Standard
Profile
Pe = Plug, Straight PCB
Tail, High Profile
Se = Socket, Straight
PCB Tail, High
Profile
1
Sl
MouNTiNg oPTioNS
Blank = .120"Mounting
Holes
Sl = Bottom side
riveted #4-40
Clinch Nuts
JS = Top side
riveted #4-40
Jackscrews
Bl = Riveted #4-40
Internal Threaded
Standoffs with
Boardlocks
R = Riveted Round
Jack Screws
JSl = Bottom side
riveted #4-40
Clinch Nuts with
Jack Screws
installed
TAil leNgTh
1 = Standard tail length for .062"-.125" PCB’s
(e = .189”)
2 = Wire wrap tail
(e = .512”)
PACkAgiNg:
Anti-ESD plastic trays
®
oRDeRiNg iNFoRMATioN
HI-TEMP
INSULATOR
®
AVA I L A B L E
oPTioNS:
Add designator(s) to end of part number
15 = 15 µin gold plating in contact area
30 = 30 µin gold plating in contact area
eMi = Ferrite filtered version for EMI / RFI
suppression (Page 114)
hT = Hi-Temp insulator for hi-temp soldering
processes up to 260°C
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
StRAIGht & wIRe wRAP PCB tAIl
Adam Technologies, Inc.
dPt & dSt SeRIeS
mounTing opTions
plug
#4-40
THREAD
C
B
A
.109 [2.77]
.112 [2.84]
.494 [12.55]
.329 [8.36]
.157
[4.0]
Sl option
Bottom side riveted #4-40
Clinch Nuts
2X ø.118 [ 3.0]
SL OPTION
#4-40
THREAD
.031 [0.8]
.232 [5.9]
.433 [11.0]
.228
[5.8]
E
.421 [10.70]
D
JS option
*E = .189" or .512"
Top side riveted #4-40
Jack Screws
soCkeT
JS OPTION
#4-40
THREAD
C
B
A
.109 [2.77]
.236
[6.0]
.112 [2.84]
.311 [7.90]
.494 [12.55]
Bl option
#4-40 Threaded Boardlocks
2X ø.118 [ 3.0]
BL OPTION
.031 [0.8]
.232 [5.9]
.433 [11.0]
.512
[13.00]
E
.421 [10.70]
D
wire wrap Tail option
Terminal length -2
wire wrap tail
*E = .189" or .512"
Unit: Inch [mm]
Positions
PLUG
SOCKET
A
A
B
C
D
DIMENSIONS
ø.126
[3.20]
9
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
.756 [19.20]
15
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
1.091 [27.70]
25
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
1.618 [41.10]
37
2.182 [55.43]
2.159 [54.84]
2.500 [63.50]
2.729 [69.32]
2.256 [57.30]
50
2.079 [52.81]
2.064 [52.43]
2.406 [61.11]
2.637 [67.00]
2.169 [55.10]
B
ø.039 [ ø1.0]
.112
[2.84]
.109
[2.77]
Recommended PCB layout
http://www.BDTIC.com/ADAM-TECH 99
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
hIGh PRoFIle StRAIGht PCB tAIl
Adam Technologies, Inc.
dPe & dSe SeRIeS
mounTing opTions
plug
#4-40 THREAD
C
B
A
.109 [2.77]
2X
.112 [2.84]
.494
[12.55]
.157 [4.0]
.329 [8.36]
DB25-Pe-1
Sl option
Bottom side riveted #4-40
Clinch Nuts
2X ø.118 [ø3.0]
#4-40 THREAD
.031
[0.8]
2X
.232 [5.9]
.433 [11.0]
.228 [5.8]
.263 [6.68]
.157 [4.0]
.422 [10.72]
D
JS option
Top side riveted #4-40
Jack Screws
soCkeT
C
B
A
#4-40 THREAD
.109 [2.77]
2X
.112 [2.84]
.494
[12.55]
.472 [12.0]
.311 [7.90]
DB25-Se-1
2X ø.118 [ø3.0]
Bl option
#4-40 Threaded Boardlocks
.031
[0.8]
.232 [5.9]
.433 [11.0]
B
ø.039 [ø1.0]
.263 [6.68]
.112 [2.84]
.157 [4.0]
.422 [10.72]
D
2X ø.126 [ø3.20]
.109 [2.77]
Recommended PCB layout
Unit: Inch [mm]
PLUG
SOCKET
A
A
B
C
D
9
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
.756 [19.20]
15
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
1.091 [27.70]
25
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
1.618 [41.10]
37
2.182 [55.43]
2.159 [54.84]
2.500 [63.50]
2.729 [69.32]
2.256 [57.30]
50
2.079 [52.81]
2.064 [52.43]
2.406 [61.11]
2.637 [67.00]
2.169 [55.10]
Positions
100
DIMENSIONS
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
dUAl PoRt, RIGht ANGle
Adam Technologies, Inc.
dPd SeRIeS
iNTRoDuCTioN:
Adam Tech Dual Port D-Sub connectors are a popular space saving
interface for many I/O applications. Offered in 9, 15, 25, 37 and 50
positions they are a good choice for a low cost industry standard
connection and are ideal for PCB space saving applications. These
connectors are manufactured with precision stamped contacts and
are available in a number of connector combinations including same
and mixed gender, mixed density and mixed interface. Options
include a choice of contact plating and a variety of mating, mounting
and grounding options.
FeATuReS:
Stacked space saving design
Industry standard compatibility
Durable metal shell design
Precision formed contacts
Variety of Mating and mounting options
MATiNg CoNNeCToRS:
Adam Tech D-Subminiatures and all industry standard
D-Subminiature connectors.
oRDeRiNg iNFoRMATioN
DPD
SPeCiFiCATioNS:
Material:
Insulator: PBT, 30% glass reinforced, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate overall.
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Temperature Rating:
Operating temperature: -55°C to +105°C
25
10
B
SeRieS
iNDiCAToR
DPD = Dual Port
D-Sub
PoSiTioNS
09 = 9 Position
15 = 15 Position
25 = 25 Position
37 = 37 Position
50 = 50 Position
X/X = Mixed positions
customer specified
3
BoARD
MouNTiNg
oPTioNS
1 = Through
holes only
2 = #4-40
threaded
holes
3 = Forked board
locks
PoRT SPACiNg
A = .900" (Dim. "E")
B = .750" (Dim. "E")
C = .625" (Dim. "E")
ToP / BoTToM geNDeR
10 = Plug top, receptacle bottom
11 = Plug top and bottom
01 = Receptacle top, plug bottom
00 = Receptacle top and bottom
PACkAgiNg:
Anti-ESD plastic trays
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
RoHS
US
C
E
COMPLIANT
2002 / 95 / EC
®
oPTioNS:
Add designator(s) to end of part number
15 = 15 µin gold plating in contact area
30 = 30 µin gold plating in contact area
JS = #4-40 Jackscrews installed
R = Rear boardlocks only
F = Four prong board lock
http://www.BDTIC.com/ADAM-TECH101
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
dUAl PoRt, RIGht ANGle
Adam Technologies, Inc.
dPd SeRIeS
DuAl poRT, RigHT Angle
A
B
C
1.00 [25.5]
.236 [6.0]
D
E
.118 [3.0]
.112 [2.84]
#4-40 UNC
.109 [2.77]
.32 [8.1]
.112 [2.84]
See page 99 for examples of various types we manufacture
Unit: Inch [mm]
Positions
102
PLUG
SOCKET
A
A
DIMENSIONS
B
C
9
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
15
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
25
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
37
2.182 [55.43]
2.159 [54.84]
2.500 [63.50]
2.729 [69.32]
50
2.079 [52.81]
2.064 [52.43]
2.406 [61.11]
2.637 [67.00]
D
E
PORT HEIGHTS
PORT TO PORT
CENTERLINE
1.119 [28.42]
.900 [22.86]
1.244 [31.60]
.750 [19.05]
1.394 [35.41]
.625 [15.88]
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
dUAl PoRt VARIAtIoNS
Adam Technologies, Inc.
dPd SeRIeS
15P hD D-Sub over 15P hD D-Sub
15P hD D-Sub elevated
15P hD D-Sub over Dual Mini DiNs
15P D-Sub over 9P D-Sub
25P D-Sub over 9P D-Sub
15P D-Sub over ganged Stereo Jacks
25P D-Sub over hD 15P D-Sub
25P D-Sub over 9P D-Sub & hD 15P D-Sub
25P D-Sub elevated
25P D-Sub over 9P D-Sub & hD 15P D-Sub
44P hD D-Sub over 44P hD D-Sub
25P D-Sub over 50P SCSi ii
http://www.BDTIC.com/ADAM-TECH103
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
HIgH DENSITY D-SUB
SoldeR CUP teRmINAtIoN
Adam Technologies, Inc.
hdt SeRIeS
iNTRoDuCTioN:
Adam Tech Solder Cup High Density D-Sub connectors are a
popular interface for many I/O applications. Offered in 15, 26, 44, 62
and 78 positions, they are a good choice for a low cost industry
standard high density connection. Adam Tech connectors are
manufactured with precision stamped contacts offering a choice of
contact plating and a wide selection of mating and mounting options.
FeATuReS:
High Density pin count in standard size shell
Industry standard compatibility
Durable metal shell design
Precision formed contacts
Mating and mounting options
MATiNg CoNNeCToRS:
Adam Tech high density D-Subminiatures and all industry standard
high density D-Subminiature connectors.
SPeCiFiCATioNS:
Material:
Insulator: PBT, 30% glass reinforced, rated UL94V-0
Insulator Colors: Black (White optional)
Contacts: Phosphor Bronze
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate overall.
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Temperature Rating:
Operating temperature: -55°C to +105°C
oRDeRiNg iNFoRMATioN
15
hDT
SeRieS iNDiCAToR
hDT = High Density
D-Sub
SD
CoNTACT TYPe
PD = Plug, Solder Cup
SD = Socket, Solder Cup
PoSiTioNS
15, 26, 44, 62, 78
PACkAgiNg:
Anti-ESD plastic trays
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
US
C
E
104
RoHS
COMPLIANT
2002 / 95 / EC
®
oPTioNS:
Add designator(s) to end of part number
15 = 15 µin gold plating in contact area
30 = 30 µin gold plating in contact area
wT = White color insulator
Sl = Bottom side Riveted #4-40 Clinch Nuts
JS = Top side riveted #4-40 Jack Screws
eMi = Ferrite filtered version for EMI / RFI
suppression (Page 114)
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
HIgH DENSITY D-SUB
SoldeR CUP teRmINAtIoN
Adam Technologies, Inc.
hdt SeRIeS
mounTing opTions
plug
C
B
A
ø.120 [3.05]
.329 [8.36]
.078 [1.98]
.157 [4.0]
.494 [12.55]
Sl option
Bottom side riveted #4-40
Clinch Nuts
.228 [5.8]
.232 [5.9]
.433 [11.00]
.031 [0.8]
.183 [4.66]
JS option
D
Top side riveted #4-40
Jack Screws
.421 [10.7]
soCkeT
C
B
A
ø.120 [3.05]
.311 [7.90]
.078 [1.98]
.494 [12.55]
.232 [5.9]
.433 [11.00]
.031 [0.8]
.183 [4.66]
D
.421 [10.70]
Unit: Inch [mm]
Positions
PLUG
SOCKET
DIMENSIONS
A
A
B
C
D
15
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
.759 [19.28]
26
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
1.083 [27.51]
44
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
1.626 [41.30]
62
2.182 [55.43]
2.159 [54.84]
2.500 [63.50]
2.729 [69.32]
2.271 [57.70]
78
2.079 [52.81]
2.064 [52.43]
2.406 [61.11]
2.635 [66.93]
2.099 [55.32]
http://www.BDTIC.com/ADAM-TECH105
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
HIgH DENSITY D-SUB
StRAIGht PCB tAIl
Adam Technologies, Inc.
hdt SeRIeS
iNTRoDuCTioN:
Adam Tech Straight PCB tail High Density D-Sub connectors are a
popular interface for many I/O applications. Offered in 15, 26, 44, 62
and 78 positions they are a good choice for a low cost industry
standard high density connection. Adam Tech connectors are
manufactured with precision stamped contacts offering a choice of
contact plating and a wide selection of mating and mounting options.
FeATuReS:
High Density pin count in standard size shell
Industry standard compatibility
Durable metal shell design
Precision formed contacts
Variety of Mating and mounting options
MATiNg CoNNeCToRS:
Adam Tech high density D-Subminiatures and all industry standard
high density D-Subminiature connectors.
SPeCiFiCATioNS:
Material:
Standard insulator: PBT, 30% glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T rated UL94V-0
Insulator Colors: Black (White optional)
Contacts: Phosphor Bronze
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate overall.
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Temperature Rating:
Operating temperature: -55°C to +105°C
Soldering process temperature:
Standard insulator: 235°C
Hi-Temp insulator: 260°C
oRDeRiNg iNFoRMATioN
SeRieS iNDiCAToR
hDT = High Density
D-Sub
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
US
C
E
106
RoHS
COMPLIANT
2002 / 95 / EC
ST
CoNTACT TYPe
PT = Plug,
Straight PCB Tail
ST = Socket,
Straight PCB Tail
PoSiTioNS
15, 26, 44, 62, 78
PACkAgiNg:
Anti-ESD plastic trays
®
15
hDT
®
oPTioNS:
Add designator(s) to end of part number
wT = White color insulator
hT = Hi-Temp insulator for Hi-Temp soldering
processes up to 260°C
Sl = Riveted #4-40 Clinch Nuts
JS = Riveted #4-40 Jackscrews
Bl = Riveted #4-40 Internal Threaded Standoffs
with Boardlocks
eMi = Ferrite filtered version for EMI / RFI
suppression (Page 114)
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
HIgH DENSITY D-SUB
StRAIGht PCB tAIl
Adam Technologies, Inc.
hdt SeRIeS
mounTing opTions
plug
C
B
A
#4-40 UNC
ø.120 [3.05]
.329 [8.36]
.078 [1.98]
.494 [12.55]
.157 [4.0]
Sl option
10°
Bottom side riveted #4-40
Clinch Nuts
#4-40 UNC
.232 [5.9]
.433 [11.00]
.031 [0.8]
.228 [5.8]
.163 [4.15]
D
JS option
.421 [10.70]
Top side riveted #4-40
Jack Screws
#4-40 UNC
soCkeT
C
B
A
ø.120 [3.05]
.311 [7.90]
.078 [1.98]
.236 [6.0]
Bl option
.494 [12.55]
Bottom side riveted
#4-40 Clinch Nuts
with PCB Boardlocks
10°
ø.126 [3.20]
ø.039 [1.0]
.078 [1.98]
.232 [5.9]
.433 [11.00]
.090 [2.29]
B
.031 [0.8]
.163 [4.15]
Recommended PCB layout
D
.421 [10.70]
Unit: Inch [mm]
Positions
PLUG
SOCKET
DIMENSIONS
A
A
B
C
D
15
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
.759 [19.28]
26
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
1.083 [27.51]
44
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
1.626 [41.30]
62
2.182 [55.43]
2.159 [54.84]
2.500 [63.50]
2.729 [69.32]
2.271 [57.70]
78
2.079 [52.81]
2.064 [52.43]
2.406 [61.11]
2.635 [66.93]
2.099 [55.32]
http://www.BDTIC.com/ADAM-TECH107
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
HIgH DENSITY D-SUB
RIGht ANGle PCB moUNt
Adam Technologies, Inc.
hdl SeRIeS
iNTRoDuCTioN:
Adam Tech Right Angle PCB mount High Density D-Sub connectors
are a popular interface for many I/O applications. Offered in 15, 26,
44, 62 and 78 positions they are a good choice for a low cost industry
standard high density connection. Adam Tech connectors are
manufactured with precision stamped contacts offering a choice of
contact plating and a wide selection of mating and mounting options.
FeATuReS:
High Density in standard size shell
Industry standard compatibility
Durable metal shell design
Precision formed contacts
Variety of Mating and mounting options
MATiNg CoNNeCToRS:
Adam Tech high density D-Subminiatures and all industry standard
high density D-Subminiature connectors.
SPeCiFiCATioNS:
Material:
Standard insulator: PBT, 30% glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T rated UL94V-0
Insulator Colors: HDL Series: Black
HDVG Series: Blue
Contacts: Phosphor Bronze
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate overall.
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Temperature Rating:
Operating temperature: -55°C to +105°C
Soldering process temperature:
Standard insulator: 235°C
Hi-Temp insulator: 260°C
PACkAgiNg:
Anti-ESD plastic trays
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
RoHS
US
C
COMPLIANT
2002 / 95 / EC
HI-TEMP
INSULATOR
®
oRDeRiNg iNFoRMATioN
hDl
15
SeRieS iNDiCAToR
hDl = High Density
D-Sub
hDVg= High Density
VESA
connector
with recessed
#9 pin and
blue insulator
PoSiTioNS
15, 26, 44, 62, 78
Sl
B
MouNT oPTioNS
A = #4-40 Jackscrews
and forked
boardlocks
B = #4-40 Flush
threaded inserts and
forked boardlocks
C = #4-40 Flush
threaded inserts
with removable
jackscrews and
forked boardlocks
D= Topside ground
straps with
screw holes
CoNTACT TYPe
Pl = Plug, Right
Angle Mount
Sl = Socket, Right
Angle Mount
oPTioNS:
Add designator(s) to end of part number
15 = 15 µin gold plating in contact area
30 = 30 µin gold plating in contact area
eMi = Ferrite filtered version for EMI / RFI
suppression (Page 114)
F = Retention 4 prong boardlocks
hT = Hi-Temp insulator for Hi-Temp soldering
processes up to 260°C
R = Round Riveted Jackscrews
AVA I L A B L E
E
108
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
HIgH-DENSITY D-SUB
RIGht ANGle PCB moUNt
Adam Technologies, Inc.
hdl SeRIeS
plug
C
B
A
.232 [5.9]
.329 [8.36]
.494 [12.55]
.078 [1.98]
#4-40 THREAD
.125 [3.18]
.450 [11.43]
ø.047 [1.20]
.100 [2.54]
E
.350 [8.89]
.874 [22.2]
D
ø.126
[3.20]
B
hDl15-Pl-B
15 Position PCB layout
soCkeT
ø.047 [1.20]
.100 [2.54]
E
C
B
A
D
.232 [5.9]
.311 [7.90]
ø.126
[3.20]
B
26, 44, 62 Position PCB layout
.494 [12.55]
.078 [1.98]
#4-40 THREAD
hi Density Video graphics Connector
.125 [3.18]
4
.450 [11.43]
9
13
.050 [1.27]
Recessed
.350 [8.89]
.874 [22.2]
hDl15-Sl-B
hDVg-15-Sl-B
Unit: Inch [mm]
PLUG
SOCKET
A
A
B
C
D
E
15
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
.277 [7.04]
.090 [2.29]
26
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
.277 [7.04]
.090 [2.29]
44
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
.277 [7.04]
.090 [2.29]
62
2.182 [55.43]
2.159 [54.84]
2.500 [63.50]
2.729 [69.32]
.276 [7.00]
.095 [2.41]
78
2.079 [52.81]
2.064 [52.43]
2.406 [61.11]
2.635 [66.93]
.300 [7.63]
.095 [2.41]
Positions
DIMENSIONS
http://www.BDTIC.com/ADAM-TECH109
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
HIgH DENSITY D-SUB
CRImP ANd PoKe SyStem
Adam Technologies, Inc.
hdt SeRIeS
iNTRoDuCTioN:
Adam Tech Crimp and Poke High Density D-Sub connectors are a
popular interface for many I/O applications. Offered in 15, 26, 44, 62
and 78 positions they are a low cost alternative to soldering a high
density connector to cable. Contacts are crimped onto discrete wires
and pushed into the connector body. The connector is comprised of
a metal shell and plastic insulator and is available with a variety
of mating options. The contacts are precision stamped and are
available in a variety of platings.
FeATuReS:
High Density in standard size shell
Low cost no solder alternative
Industry standard compatibility
Durable metal shell design
Precision formed contacts
Variety of Mating and mounting options
oRDeRiNg iNFoRMATioN
houSiNg
MATiNg CoNNeCToRS:
Adam Tech high density D-Subminiatures and all industry standard
high density D-Subminiature connectors.
SPeCiFiCATioNS:
Material:
Insulator: PBT, 30% glass reinforced, rated UL94V-0
Insulator Colors: Black (White optional)
Contacts: Phosphor Bronze
Shell: Steel, Tin or Zinc plated
Hardware: Brass, Nickel plated
Contact Plating:
Gold flash (15 and 30 µin optional) over Nickel underplate overall.
electrical:
Operating voltage: 250V AC / DC max.
Current rating: 5 Amps max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 0.75 lbs max
Extraction force: 0.44 lbs min
Recommended wire size: 22 to 28 Awg
Temperature Rating:
Operating temperature: -55°C to +105°C
PR
15
hDT
SeRieS iNDiCAToR
hDT= High Density
D-Sub
CoNTACT TYPe
PR = Plug, Crimp
and Poke Housing
SR = Socket, Crimp and
Poke Housing
PoSiTioNS
15, 26, 44, 62, 78
CRiMP CoNTACT
hDCP
SeRieS iNDiCAToR
hDCP = Plug Contact
hDCS = Socket Contact
PACkAgiNg:
Anti-ESD plastic trays
01
CoNTACT
SiZe Awg:
01 = 24-26
02 = 20-22
03 = 28-30
R
PACkAgiNg
R = 10,000 piece
chain on reel
B = 1000 pieces
loose cut
APPRoVAlS AND CeRTiFiCATioNS:
UL Recognized & CSA Certified, File no. E224053
Pb
®
US
C
E
110
RoHS
COMPLIANT
2002 / 95 / EC
®
oPTioNS:
Add designator(s) to end of part number
15 = 15 µin gold plating in contact area
30 = 30 µin gold plating in contact area
wT = White color insulator.
Sl = Riveted #4-40 Clinch Nuts
JS = Riveted #4-40 Jackscrews
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
HIgH DENSITY D-SUB
CRImP ANd PoKe SyStem
Adam Technologies, Inc.
hdt SeRIeS
plug
C
B
ø.120 [3.05]
A
.329 [8.36]
.492 [12.5]
.078 [1.98]
10°
Plug Contact
.232 [5.9]
ø.030
[0.76]
.035
[0.90]
.118 [3.0]
B
.071
[1.80]
.065
[1.65]
A
.433 [11.00]
.031 [0.8]
.300
B A
[7.55]
.700 [17.60]
.433 [11.00]
D
SEC A-A
.053
[1.34]
.060
[1.52]
.421 [10.70]
SEC B-B
soCkeT
C
B
ø.120 [3.05]
A
.311 [7.90]
.492 [12.5]
.078 [1.98]
10°
Socket Contact
.073
[1.85]
.035 [0.90]
.232 [5.9]
.063
[1.60]
.118 [3.0]
.064
[1.63]
.433 [11.00]
B A
.031 [0.8]
.433 [11.00]
D
SEC A-A
.053
[1.34]
.060
[1.52]
B A
.283 [7.20]
.681 [17.30]
.421 [10.70]
SEC B-B
Unit: Inch [mm]
PLUG
SOCKET
A
A
B
C
D
15
.666 [16.92]
.643 [16.33]
.984 [24.99]
1.213 [30.81]
.759 [19.28]
26
.994 [25.25]
.971 [24.66]
1.312 [33.32]
1.541 [39.14]
1.083 [27.51]
44
1.534 [38.96]
1.511 [38.38]
1.852 [47.04]
2.088 [53.04]
1.626 [41.30]
62
2.182 [55.43]
2.159 [54.84]
2.500 [63.50]
2.729 [69.32]
2.271 [57.70]
78
2.079 [52.81]
2.064 [52.43]
2.406 [61.11]
2.635 [66.93]
2.099 [55.32]
Positions
DIMENSIONS
http://www.BDTIC.com/ADAM-TECH111
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
BACKShellS
Adam Technologies, Inc.
dhd SeRIeS
.807 [20.50]
1.520 [38.60]
1.087 [27.60]
ø.406 [ø10.31
ø.512 [ø13.00]
ø.717 [ø18.20]
.417 [36.00]
.850 [21.60]
.465 [11.80]
1.209 [30.70]
1.575 [40.00]
De09-hD-PN-(SS or TS)
1.976 [50.20]
DB25-hD-PN-(SS or TS)
DA15-hD-PN-(SS or TS)
2.732 [69.40]
ø.630 [ø16.00]
1.594 [40.50]
.760 [19.20]
1.575 [40.00]
2.130 [54.10]
2.732 [69.40]
DC37-hD-PN-(SS or TS)
DD50-hD-PN-(SS or TS)
.59 [15.0]
#4-40 Thread
oRDeRiNg iNFoRMATioN
choose one from each category as shown in sample below
De09-hD
hood Size
PY
hood Color
TS
hardware
De09-hD - 9P Hood
DA15-hD - 15P Hood
DB25-hD - 25P Hood
DC37-hD - 37P Hood
DD50-hD - 50P Hood
PY - Gray Plastic
PB - Black Plastic
PN - Bright Chrome
Plated Plastic
Al - Aluminum Cast
SS - Short Screw
TS - Thumb
Screw
112
1.732 [44.0]
Short screw
#4-40 Thread
Pb
RoHS
Thumb screw
COMPLIANT
2002 / 95 / EC
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
hARdwARe & ACCeSSoRIeS
Adam Technologies, Inc.
hdw SeRIeS
Jackscrews
Thread Depth
.100 [2.54] Min
#4-40 X .15 DP
Inside Thread
.188 [4.78]
Across Flats
A
B
JACKSCREW DIMENSIONS
PART
NUMBER
A
B
JS-01
.416 [10.60]
.226 [5.70]
JS-02
.467 [11.86]
.270 [6.86]
JS-03
.500 [12.70]
.313 [7.95]
JS-04
.465 [11.81]
.226 [5.70]
#4-40 X .15 DP
Outside Thread
HDW-031
HDW-024
Set includes 2 #4-40
Set includes 2 #4-40
female jackscrews
HDW-023
Set includes 2 #4-40
female jackscrews 2
flat washers, 2 split
washers and 2 hex nuts
HDW-029
Screw lock kit includes
2 screw locks and 2
female jackscrews and
2 hex nuts
HDW-028
Screw retainer clip set
includes 2 screw
retainer clips and
2 retainer screws
HDW-044
Sliding lock posts
retainer screws
Set of 2
HDW-043A
HDW-045
Slide lock post set
Slide lock post kit
includes 2 posts,
2 washers and 2 lock-washers
HDW-043-XX
Slide lock assembly kit
includes slide lock,
screws and washers,
Specify 9, 15, 25 or
37 position
includes 2 posts,
washers and hex nuts
HDW-041
Spring latch set includes
1 pair of spring latches
with holding hardware and
1 pair of notch clips with
holding hardware
http://www.BDTIC.com/ADAM-TECH113
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com
D-SUBMINIATURE
emI FIlteR oPtIoN
Adam Technologies, Inc.
iNTRoDuCTioN:
Adam Tech EMI filtered D-Sub option includes the addition of a high
performance Ferrite Filter which surrounds each contact and
provides a low cost EMI answer for high frequency interference. Our
ferrite filtered D-Subs are direct drop-in replacements with our
standard unfiltered D-Subs with the same footprint.
FeATuReS:
Direct replacement for standard non-filtered parts
Low cost alternative to passive component types
Significant reduction of noise at high frequencies
See pgs. 75, 78, 92, 98, 104, 106, 108 for ordering information
Typical Performance
1000
AdamTech offers a complete range of ferrite filtered
D-Subs to satisfy EMI/RFI emissions in most
applications. This series offers filtered connectors in
a multitude of terminations, mating and mounting
options.
•
Low applied cost
•
Significant reduction of noise
at high frequencies
IMPEDANCE
Drop in replacement for standard
D-Subs
XL
10
R
1
I
I
•
100
XC
X
X
0.1
1
10
100
1000
* Consult factory for specific part number impedance performance.
25 Position
FREQ (MHZ)
1
5
10
25
30
40
50
100
200
FREQ (MHZ)
1
XC-
5
10
XL-
5.4
15
18
23
25
26
28
34
51
R-
0.656
11
18
29
32
37
40
50
64
300
400
500
600
700
800
900
1000
1.27
0.807
0.856
0.977
344
170
77
40
XCXL-
73
101
122
57
R-
84
121
199
342
XLR-
30
40
50
100
200
X
4
14
18
22
24
26
27
35
55
0.309
8.4
15
26
29
33
36
46
59
300
400
500
600
XC-
1
XL-
81
115
147
65
R-
79
119
210
394
1
5
10
25
30
40
50
100
200
XL-
3.6
15.9
19
24
25
27
28
36
54
R-
0.116
8.4
16
28
31
35
39
49
62
300
400
500
600
700
800
900
XC-
0.998
80
112
138
48
R-
83
124
215
389
339
800
900
0.762
0.851
1000
0.986
356
150
65
34
30
40
50
100
200
X
FREQ (MHZ)
XC-
XL-
700
0.983
37 Position 1
FREQ (MHZ)
114
25
XC-
0.78
147
0.864
64
1
XLR-
33
10
25
4.9
16
20
25
27
28
30
36
53
0.45
8.4
15
26
29
33
36
46
59
400
500
600
300
1000
0.996
5
XC-
XCXL-
76
105
122
29
R-
80
122
224
424
700
800
900
1.082
0.814
0.879
1000
1
332
131
56
29
http://www.BDTIC.com/ADAM-TECH
909 Rahway Avenue • Union, New Jersey 07083 • t: 908-687-5000 • F: 908-687-5710 • www.AdAm-teCh.Com