BDTIC TLE4998 Evaluation Kit Programmer tool & software for TLE4998
by user
Comments
Transcript
BDTIC TLE4998 Evaluation Kit Programmer tool & software for TLE4998
Product Brief BDTIC Requirements TLE4998 Evaluation Kit Programmer tool & software for TLE4998 PC running Windows environment External magnetic setup for magnetic THE TLE4998 FAMILY of high precision linear Hall sensors is available with Pulse Width Modulation (PWM), Single Edge Nibble Transmission (SENT) as well as Short PWM Code (SPC) interface and offers various programmable parameters. In order to get a first impression of the sensor’s performance, the TLE4998 evaluation kit is available including all necessary hard- and software to interface and program the sensor according to your needs. The evaluation kit comes with the PGSISI programmer hardware and a PCB board with sockets accommodating two TLE4998 sensors. The programmer is interfaced through a standard USB or a RS232 serial connection to any PC running with a Windows operating system. The software delivered with the evaluation kit allows to read the output values from the sensor and perform all relevant programming steps including entering the parameters for temperature compensation and doing a two point calibration. Together with your magnetic setup, the evaluation kit allows to appraise the performance of the TLE4998 in terms of flexibility, accuracy and temperature stability. Kit contains PGSISI programmer hardware box PCB board with sockets for two TLE4998 sensors Sample TLE4998 sensors 24V DC power supply USB and RS232 connection cables Installation CD with programmer software, necessary drivers and application notes Quick start guide www.infineon.com/sensors www.BDTIC.com/infineon evaluation Product Brief TLE4998 Evaluation Kit Programmer tool & software for TLE4998 PCB Board PC with TLE4998 Evaluation Software USB/RS 232 Interface PGSISI Programmer Box TLE4998 Socket 1 Block diagram The evaluation kit establishes a direct connection between the PC and up to two TLE4998 sensors. TLE4998 Socket 2 BDTIC Software Features Manual setup of all programmable parameters Guided setting of temperature compensation coefficients Automatic gain and offset calculation for two point calibration Real time feedback of sensor registers Burn and erase functionality for EEPROM memory This evaluation kit works for TLE4998P3 TLE4998S3 TLE4998C3 TLE4998P4 TLE4998S4 TLE4998C4 Product Summary Product Name Description Ordering Code TLE4998 Evaluation Kit Evaluation Kit including PGSISI SP000425300 programmer box, PCB board, Software CD How to reach us: http://www.infineon.com Published by Infineon Technologies AG 81726 Munich, Germany © 2008 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this Product Brief shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or main-tain and sustain and/or protect human life. If they fail, it is reasonable to assume that thhealth of the user or other persons may be endangered. www.BDTIC.com/infineon Published by Infineon Technologies AG Order Number: B142-H9258-X-X-7600