Product Brief TLE7183F Three-Phase Bridge driver IC for MOSFET power
by user
Comments
Transcript
Product Brief TLE7183F Three-Phase Bridge driver IC for MOSFET power
Product Brief TLE7183F Three-Phase Bridge driver IC for MOSFET power stages with multiple protection functions I n f i n e o n ’ s T L E 7 1 8 3 F Three-phase driver IC integrates 6 MOSFET gate drivers, a 2-stage charge pump, over-current protection, over-temperature Features & Benefits ■ Compatible with low RDS(on) protection, current sense OpAmp, superior EMC behavior and diagnostics to enable N-Channel MOSFETs to enable high a wide range of automotive applications. current applications. Integrated 2-stage charge pump allows BDTIC ■ The TLE7183F includes 6 inputs for independent control of each MOSFET. full operation at supply voltages down The TLE7183F also includes adjustable dead time and the flexibility to control each to 5.5 V at duty cycle range from phase with one input. It is designed to operate with the lowest RDS(on) N-Channel 0% to 100%. MOSFET’s such as Infineon’s Automotive 30 V and 40 V power MOSFETs. ■ Integrated high bandwidth, low-offset current sense amplifier. The TLE7183F can support PWM frequencies from 0 to 30 kHz. ■ PWM frequency up to 30 kHz and operating voltage range up to 20 V. Parameter Symbol Value Unit Can withstand voltages up to 40 V. Peak Turn-on Current IGxx(on) 1500 mA Covers many different applications Peak Turn-off Current IGxx(on) 1500 mA and motors. Supply Voltage Range V 5.5 ... 20 V ■ Gate Voltage VGS 10 V ■ Temperature Range Tj -40 ... +150 °C Low EMC sensitivity and emissions. Adjustable dead time with shoot through protection and short-circuit protection for each MOSFET. ■ Protected against reverse polarity, under-voltage, over-current and Applications ■ Three-phase high-current motor driver for electronic power steering. over-temperature. Increases reliability ■ Three-phase generator for integrated starter alternator. and reduces the risk of damage to the ■ Three-phase motors for transmission/ECMT, water pumps, oil pumps, electronic power circuits and the motor. fuel pumps, HVAC. ■ Six independent TTL inputs or control TLE7183 with only three microcontroller pins. http://www.infineon.com/Driver-IC Automotive Power www.BDTIC.com/infineon Product Brief Application Example RVS 10 Ω C 3 µF CVS 4.7 µF To sub µC or ASIC VBAT = 12 V P-GND RVdh INH ENA1 ENA2 VS VDH CH1 CCP1 4.7 µF CCB1 4.7 µF CCP2 4.7 µF CL1 CB1 GH1 CH2 GH2 SH1 SH2 CL2 CB2 BDTIC CCB2 4.7 µF GH3 SH3 U_fb V_fb W_fb ERR1 ERR2 IL1 IH1 IL2 IH2 IL3 IH3 DT µC or Digital ASIC 5V 5V GL1 TLE7183F SL1 GL2 SL2 GL3 SL3 VRI VRO Rfb ISP VTHOC RDT GND ADC VO TP Shunt RS ISN AGND GND RS Rfb P-GND Product Summary Type Sales Code Description Package TLE7183F TLE7183F 3-phase Bridge Driver IC VQFN-48 Legal Disclaimer The information given in this Product Brief shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. How to reach us: http://www.infineon.com Published by Infineon Technologies AG 81726 Munich, Germany © Infineon Technologies AG 2007. All Rights Reserved. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Ordering No. B112-H8980-X-X-7600 Printed in Germany PS 0207.2 nb www.BDTIC.com/infineon Published by Infineon Technologies AG