Comments
Description
Transcript
Tips and Tricks
FlowCAD OrCAD / Allegro PCB Editor Tipps und Tricks www.FlowCAD.ch www.FlowCAD.de FlowCAD Webinar FlowCAD Tips and Tricks Print Screen from the Canvas www.FlowCAD.ch www.FlowCAD.de • FlowCAD Tips and Tricks Open Windows Explorer with the working folder www.FlowCAD.ch www.FlowCAD.de • FlowCAD Tips and Tricks Z-Copy: Copy a Shape to another Layer www.FlowCAD.ch www.FlowCAD.de • FlowCAD Tips and Tricks Z-Copy: Copy a Shape to more than one Layer www.FlowCAD.ch www.FlowCAD.de • FlowCAD Tips and Tricks • Function Key (funckey) Example: Rotate a Component using a Function Key: When you enter following command in the Command window, with pressing R you can rotate a component during movement: To add this Funckey permanently to your environment, add this command in the “env” File in your home directory www.FlowCAD.ch www.FlowCAD.de Funckey r iangle 90 FlowCAD Tips and Tricks Where is my Environment (env) File? www.FlowCAD.ch www.FlowCAD.de • FlowCAD Tips and Tricks • More Function Key (funckey) to reduce mouse clicks Example: Pressing the space bar place a via with following command: funckey " " "pop bbdrill -cursor" funckey m "pop mirror" www.FlowCAD.ch www.FlowCAD.de Example: mirror a component FlowCAD Tips and Tricks Set up a SITE – Variable: - Create a read only folder on your network - In this folder you can store the settings - Respect the required file structure - Set an environment variable on each users machine: CDS_SITE= <PATH to your SITE Folder> www.FlowCAD.ch www.FlowCAD.de How to define the same Environment settings for all users? FlowCAD Tips and Tricks www.FlowCAD.ch www.FlowCAD.de For more information, check out our application notes: http://www.flowcad.ch/cms/upload/ApplicationNotes/FlowCAD_AN_PCB_site.pdf FlowCAD Tips and Tricks Rounding corners on connected lines www.FlowCAD.ch www.FlowCAD.de • FlowCAD Tips and Tricks Export components placement for placement machines www.FlowCAD.ch www.FlowCAD.de • FlowCAD Tips and Tricks Export all footprints and padstacks from an existing board www.FlowCAD.ch www.FlowCAD.de • FlowCAD Tips and Tricks • Reopen Command • Write Command Allows to store the project in the same directory with your desired name. Example: write myboard.brd www.FlowCAD.ch www.FlowCAD.de This very useful command reopens the design. Just enter “reopen” in the command window. Last changes are not saved! FlowCAD Via Labels Setup → Design Parameters →Via Labels www.FlowCAD.ch www.FlowCAD.de 10 Fragen. Danke für Ihre Mithilfe. FlowCAD Tips and Tricks www.FlowCAD.ch www.FlowCAD.de How can the output files be stored in different folders? Setup → User Preferences → File_Management → Output_dir FlowCAD Tips and Tricks www.FlowCAD.ch www.FlowCAD.de How can I disable the file versioning? Setup → User Preferences → File_Management → Versioning FlowCAD Tips and Tricks www.FlowCAD.ch www.FlowCAD.de How can I change the zoom factor? Setup → User Preferences → Ui → Zoom → Buttonfactor FlowCAD Tips and Tricks www.FlowCAD.ch www.FlowCAD.de Same Net DRCs not being generated? • Most likely your “DRC by-layer” setting in the Constraint Manager is set to “False” FlowCAD Tips and Tricks How to curves Clines? Use Slide – Right Mouse Button – Enhanced Arc → Select Corner www.FlowCAD.ch www.FlowCAD.de • FlowCAD Tips and Tricks After: Pick here! www.FlowCAD.ch www.FlowCAD.de Before: FlowCAD Tips and Tricks Disable the option for new databases: set the variable called "options_no_enhanced_padentry" in Setup > User Preferences > Route > Connect Category www.FlowCAD.ch www.FlowCAD.de Enhanced Pad Entry: FlowCAD Tips and Tricks Rotate a group of components, without rotating each component separately: www.FlowCAD.ch www.FlowCAD.de • FlowCAD Tips and Tricks www.FlowCAD.ch www.FlowCAD.de Solution: Set Rotation Point to User Pick in the Options Panel FlowCAD Tips and Tricks www.FlowCAD.ch www.FlowCAD.de Status → Display: rectangles are icons FlowCAD Tips and Tricks How to change the text size of several textblocks in one time? www.FlowCAD.ch www.FlowCAD.de Before: FlowCAD Tips and Tricks Select the area where you want to change the text size on the canvas Select the desired textblock size in the Options panel www.FlowCAD.ch www.FlowCAD.de How to change the text size of several textblocks in one time? www.FlowCAD.ch www.FlowCAD.de FlowCAD Tips and Tricks FlowCAD Tips and Tricks How to change several line widths in one time? www.FlowCAD.ch www.FlowCAD.de Edit → Change → Set Line width in Options panel → select lines / clines FlowCAD Tips and Tricks How to change the drill legend size? • Open the template default-xx.dlt from following directory: <installation folder>\SPB1650\share\pcb\text\nclegend Change the text size: www.FlowCAD.ch www.FlowCAD.de • FlowCAD Tips and Tricks www.FlowCAD.ch www.FlowCAD.de How to delete Island Shapes? FlowCAD Tips and Tricks www.FlowCAD.ch www.FlowCAD.de How to store colour views? FlowCAD Tips and Tricks After: The command is only available in the Placement Edit Mode!! www.FlowCAD.ch www.FlowCAD.de Align Components Before: FlowCAD Tips and Tricks Activate the routing Layers. www.FlowCAD.ch www.FlowCAD.de Enable Working Layer Mode: FlowCAD Tips and Tricks www.FlowCAD.ch www.FlowCAD.de When adding a via, you’re prompted to select the layer on which you want to continue your trace. FlowCAD Tips and Tricks How to calculate Line Impedance? www.FlowCAD.ch www.FlowCAD.de → Requires a correct layer stack-up! FlowCAD Tips and Tricks When a certain impedance is required for differential pair, You can enter the impedance as well. The tool calculates the spacing or width accordingly. You can chose which field should be adapted. www.FlowCAD.ch www.FlowCAD.de When you want to know, which line width is required to obtain a certain impedance, just enter your desired impedance manually. The line width gets calculated accordingly. FlowCAD Tips and Tricks How associate a not connected pin to a net class? www.FlowCAD.ch www.FlowCAD.de Enter following command in the command window: Cns_dummy_net Following window appears: FlowCAD Tips and Tricks Where are the dimension commands? www.FlowCAD.ch www.FlowCAD.de Since SPB 16.5, associative dimensioning is possible. All the commands are available in the right mouse button menu after selecting Manufacture → Dimension Environment FlowCAD Tips and Tricks How to dimension a cut-out? 2 3 4 www.FlowCAD.ch www.FlowCAD.de 1. Select Dimension Environment → Linear Dimension 2. Select a cut-out boarder 3. Press Right Mouse Button → Reject 4. Select the second boarder FlowCAD Tips and Tricks «Design Reuse» www.FlowCAD.ch www.FlowCAD.de A simple way to reuse a part of an existing design is to use the place replicate command. This command is only available in the placement edit and in OrCAD PCB Designer Professional or Allegro PCB Designer. FlowCAD Tips and Tricks «Design Reuse» Copy schematic from one project to another: Create the netlist within the new capture project www.FlowCAD.ch www.FlowCAD.de - FlowCAD Tips and Tricks «Design Reuse» www.FlowCAD.ch www.FlowCAD.de Place all components FlowCAD Tips and Tricks «Design Reuse» www.FlowCAD.ch www.FlowCAD.de Place replicate apply FlowCAD Tips and Tricks «Design Reuse» www.FlowCAD.ch www.FlowCAD.de Place replicate apply FlowCAD Tips and Tricks www.FlowCAD.ch www.FlowCAD.de Fillets and tapered traces FlowCAD Tips and Tricks Fillets and tapered traces Curved “Off” 60° 90° Curved “On” www.FlowCAD.ch www.FlowCAD.de Angle 45° FlowCAD Tips and Tricks - Fillets After: www.FlowCAD.ch www.FlowCAD.de Before: FlowCAD Tips and Tricks – Tapered traces Enable the function: Route→ Gloss → Add Tapered Trace After: www.FlowCAD.ch www.FlowCAD.de Before: FlowCAD Ende Für Fragen, Anregungen oder Bemerkungen erreichen Sie mich unter: Tel.: E-Mail: + 41 (0) 56 485 91 91 [email protected] www.FlowCAD.ch www.FlowCAD.de Besten Dank für Ihre Teilnahme und für Ihr Interesse! www.FlowCAD.ch www.FlowCAD.de FlowCAD