handbook hood fgl 9016xs 9925186 630004861 hood fgl

HANDBOOK
HOOD FGL 9016XS 9925186
HOOD FGL 6016XS 9925185
630004861
630004860
UPDATED JUNE 2007
MOTOR NR 01 POWER IMPUT : 190 W
SPEED : 3+INTENSIVE
LIGHTING : 20 W X2 HALOGEN LAMPS
TOTAL POWER : 230 W
FLOW RATE (FREE DELIVERY) : 640 M3/H
FLOW RATE (IEC 61591) 600/520 M3/H
SOUND POWER (IEC 60704-2-13) 67
IMPUT VOLTAGE : 230V 50 HZ
EXIT DIAMETER 150 MM
PRESSURE MAX 280 PA
CONTROLS : SPEED CONTROL
CONTENTS:
DRAWING
PAGE 2
TECHNICAL DATA PAGE 3
ELECTRICAL CONNECTION PAGE
METAL GREASE FILTERS
CONTROLS HOW IT WORKS
CHARCOAL FILTER
SUBSTITUTION OF THE CHARCOAL FILTER PAGE 5
CHANGING LAMP 20 W –GREASE FILTERS PAGE 6
LIST SPARE PARTS
PAGE 7
EXPLODED VIEW
PAGE 13
WIRING DIAGRAM
PAGE 18
4
PAGE 4
PAGE 4
PAGE 5
1
2
3
ELECTRICAL CONNECTION •
Connect the hood to the mains through a two-pole switch having a contact gap of at least 3
mm.
• Remove the grease filters being sure that the connector of the feeding cable is correctly
inserted in the socket placed on the side of the fan.
FUNCTION
T1 ON-OFF MOTOR Switches the hood motor on and off. The latest selected speed appears on the display.
T2 SPEED - Decreases the suction speed: V3 →» V2 →» V1
T3 SPEED + Increases the suction speed: V1 →» V2 →» V3
T4 INTENSIVE SPEED Activates the intensive speed from any previously selected speed. The intensive speed can be activated even when the
motor is OFF. By pressing the same touch control once again or by switching off the motor this function can be deactivated.
Intensive speed cannot be activated when the delay function is on. Intensive speed has been timed at 10 minutes:
H appears on the display and a spot down on the right side flashes once a second. After 10 minutes the system activates
automatically the latest selected speed.
4
T5 DELAY Activates and deactivates the delayed shutdown of the hood (motor + lighting) at 30 minutes: the selected speed of the hood appears
on the display and a spot down on the right side flashes once a second. By pressing the same touch control once again or by switching off the
motor delay function can be deactivated.
L LIGHTING Turns light on and off.
Charcoal filter (recycling version)
This filter cannot be washed or regenerated. It must be replaced when the C
appears on the display or at least once every 4 months.
The filter saturation alarm has to be activated already before. Activation of the
alarm signal • In the recycling version hoods the filter saturation alarm must be
activated during the instal-lation or later.
• Switch off the hood and the lights.
• Press the E-key for about 5 seconds until the last two segments of the motor
LEDS are lit on the display.
• By releasing the E-key the clock icon starts to flash.
• Within 3 seconds press the D-key to activate/deactivate charcoal filter
saturation alarm.
• C-symbol lit - charcoal filter saturation alarm ACTIVATED. • C-symbol unlit charcoal filter saturation alarm DEACTIVATED.
SUBSTITUTION OF THE CHARCOAL FILTER
Alarm reset
• Switch off the motor and the lighting system.
• Press the G-key for at least 2 seconds. Substitution of the filter
• Open the confort panel.
• Remove the metal grease filters.
• Remove the charcoal filter as indicated in the picture.
• Place the filter again into its seat.
• Place again the metal grease filters into their place.
5
LIGHT REPLACEMENT 20 W halogen light.
• Remove the snap-on lamp cover by levering it from under the metal ring, supporting it with one hand.
• Remove the halogen lamp from the lamp holder by pulling gently.
• Replace the lamp with a new one of the same type, making sure that you insert the two pins properly into
the housings on
the lamp holder.
• Replace the snap-on lamp cover.
CLEANING METAL SELF- SUPPORTING GREASE FILTERS •
The filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a
dishwasher.
• Remove the filters one at a time holding them up with one hand and pulling the handle downwards with the other hand at the same
time.
• Wash the filters, taking care not to bend them. Allow them to dry before refitting.
• When refitting the filters, make sure that the handle is visible on the outside.
6
FGL 6016XS 9925185
630004860
POS SERVICE CODE FAN CODE
DESCRIPTION
DESCRIZIONE
NR
1
2
3
5
6
7
8
10
11
12
13
14
15
16
100
101
102
103
104
105
106
107
108
300
301
303
304
305
306
307
308
309
310
311
SELF SUPPORTING FILTER SIFIM X (FRANKE)
GRILLE HINGE PIN D.510-050
SPOTLIGHT SUPPORT
MAIN BODY X K03 W/GLASS 60
SCATOLA IMBALLO 600
VITE 2,2X7,5 TSP TORX SPU INOX
GROUP ELECTROLIGHTS INOX
INVERTER BOX COVER
INVERTER F. ELECTROLUMINESCENT L.
INVERTER BOX
CABLE INLET GROMET D13
FEMALE PLUG BOX 2 WAYS
MALE PLUG BOX 2 WAYS
BUILT IN SPOTLIGHT S1000
CONTROL GROUP
CONTROL BOARD GLASS FRANKE PC
CONTROL BOX
SCHEDA TASTIERA 6-1 DIGIT ROSSI ORIZZ.
COMMANDS COVER PP-V2
STAFFA FISS.COMANDI ELN RETT.ZN PIEGATA
FLAT COMANDI 60 6 VIE L=900
9WAYS MALE CONNECTOR (V2)
CABLE CLAMP (HI-LO)
POWER PACK HI-LO HIP 4V
ELECTRIC COVER (V2)
CONDENSER BLOCKING
MOTOR ASSEMBLY HI-LO HIP
CONNECTOR STS 240 A1 (CLII)
FEMALE 9 WAYS CONNECTOR (V2)
LOWER DIFFUSER (V2)
MOTOR CABLE CLAMP
MOTORE 8/35K-A 4V 220-240
SX D140 M8 ROTOR (V2)
UPPER DIFFUSER (V2)
FILTRO AUTOPORTANTE SIFIM X (FRANKE)
PERNO ROTAZIONE GRIGLIA
SUPPORTO FARETTI X PIEGATO
SCOCCA MODA LUMIA/2 EL K03 X 60 C/VETRO
COPERCHIO SUP.C/LUMIN.X PIEGATO(MODA/2)
VITE 2,2X7,5 TSP TORX SPU INOX
GRUPPO ELETTROLUMINESCENZA INOX-TRASP.
COPERCHIO SCATOLA INVERTER
INVERTER 12V PER ELETTROLUMINESCENZA
SCATOLA INVERTER
PASSACAVO GOMMA D13 ART.M11V
SCATOLA PORTAFEMMINE 2 VIE
SCATOLA PORTAMASCHI 2 VIE
FARETTO AD INCASSO S1000 20W C/FASTON
GRUPPO COM.K-CS/M-CS 6-1D ORIZ.FRANKE
VETRINO COMANDI FRANKE PC
SCATOLA COM.6-1 D.FRANKE GM S.M-CS OR
SCHEDA TASTIERA 6-1 DIGIT ROSSI ORIZZ.
COPERCHIO COMANDI PA 6.8 V0
STAFFA FISS.COMANDI ELN RETT.ZN PIEGATA
FLAT COMANDI 60 6 VIE L=900 C/CONNETTORI
CONNETTORE MASCHIO 9 VIE V2
BLOCCACAVO (HI-LO)
GRUPPO M.HI-LO HIP 4V CLII
COPERCHIO IMPIANTO ELETTRICO (V2)
FERMACONDENSATORE (V0)
CONDENSATORE 6,3MF 400V 10000 ORE
CONNETTORE STS 230 A1 SPINA 2P
CONNETTORE FEMMINA 9 VIE V2
DIFFUSORE INFERIORE (V2)
BLOCCACAVO MOTORE (V2)
MOTORE 8/35K-A 4V 220-240
ASS.GIRANTE SX D140 M8 (V2)
DIFFUSORE SUPERIORE (V2)
2
2
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1960327
1960222
1960434
1961123
1961124
1961125
1961126
1961127
1986128
1961129
1960220
1960024
1960025
1960387
1960712
1960128
1960627
1960628
1960129
1961130
1960629
1960032
1960104
1960630
1960142
1960195
1960631
1960031
1960033
1960182
1960106
1960632
1960206
1960181
1.330.017.023
1.330.016.970
1.330.017.089
1.330.017.586
1.330.017.564
1.330.017.604
1.330.017.599
1.330.017.655
1.330.017.673
1.330.017.656
1.330.016.969
1.330.016.853
1.330.016.854
1.330.017.060
1.330.017.573
1.330.017.646
1.330.017.041
1.330.016.888
1.330.016.928
1.330.016.885
1.330.016.861
1.330.016.906
1.330.017.578
1.330.016.937
1.330.016.956
1.330.016.892
1.330.016.860
1.330.016.862
1.330.016.951
1.330.016.908
1.330.016.837
1.330.016.963
1.330.016.950
7
POS SERVICE CODE FAN CODE
DESCRIPTION
DESCRIZIONE
NR
313
314
315
316
320
324
328
329
501
502
503
504
505
508
509
509
602
603
604
606
607
608
609
610
613
614
615
616
617
618
619
620
624
625
626
627
MOTOR SUPPORT
DX D140 M8 ROTOR (V2)
IMPELLER SECURING-NUT
AIR-INLET RIGHT FLANGE (V2)
AIR-INLET LEFT FLANGE (V2)
SCREW 4x9
MOTOR FIXING SCREW
MOTOR RUBBER
UPPER CHIMNEY X F470
UPPER CHIMNEY FIXING BRACKET
BENT BRACKET ZN
FILTERING CONNECTION(DIVERTER)
SPACER CONNECTION FOR RECIRCULATING
REDUCTION FLANGE 150-120 BK
CAMINO INFERIORE RETT.X A745 S.FRANKE
LOWER CHIMNEY X A545
DIFFUSER BRACKET
PARTICULAR CABLE GUIDE
CAPTIVATED NUT 5004-A 4M
FIXING KIT
PLUG S8
ZINC PLATED SCREW
CABLE CLAMP
SUPPLY-CABLE COVER
BODY FIXING KNOB
SCREW 4,2X44
DIFFUSER SUPPORT ASS.STILO/3 ZN
CHARCOAL FILTER COVER
SUPPLY CABLE 2X0,75X2100 542+844 IT.PLUG
MAIN CABLE BOX
SCHEDA BASE M-CS M8 4V 220V 50/60HZ
MAIN CABLE BOX COVER
MALEHOLDER BOX
FEMALEHOLDER BOX
TRANSFORMER TOR. 40VA (40 W)
EXAGON SELF-LOCKING NUT (SERPRESS)
SUPPORTO MOTORE ZN M8
ASS.GIRANTE DX D140 M8 (V2)
DADO GIRANTE
FLANGIA ENTRATA ARIA DX (V2)
FLANGIA ENTRATA ARIA SX (V2)
VITE 4X9 AFLLS TMT D14 FR PZ PMT
VITE FISSAGGIO MOTORE 8
GOMMINO MOTORE 8c
CAMINO SUPERIORE RETT.X F470 PIEGATO
STAFFA FISSAGGIO CAMINO SUP.ZN PIEGATA
SUPPORTO RACC.FILTRANTE ZN
RACCORDO FILTRANTE (UP) (V2)
DISTANZIALE RACC.FILT.DISASS.(PARETE)
FLANGIA RIDUZIONE 150-120 BK
CAMINO INFERIORE RETT.X A745 S.FRANKE
CAMINO INFERIORE RETT.X A545 S.FRANKE
STAFFA DIFFUSORE P/H.E-CUBE ZN PIEGATA
PARTICOLARE PASSACAVO (V2)
DADO IN GABBIA Q 404-08 M4
FISSAGGIO CAPPA ASSIEMATO
TASSELLO S8 C FISCHER 51049
VITE ZINCATA M4X40 TC CACC.
STAFFA FERMACAVO
COPERCHIO CAVO ALIMENTAZIONE (V2)
POMELLO FISSAGGIO SCOCCA
VITE 4,2X44,4 T/T F.A PM ZN
SUPPORTO DIFFUSORE ASS.STILO/3 ZN
TAPPO C.A. (V2)
CAVO AL.2X0,75X2100 W 542+844 SP.ITALIA
SCATOLA IMPIANTO ELETTRICO (V2)
SCHEDA BASE M-CS M8 4V 220V 50/60HZ
COPERCHIO SCATOLA IMPIANTO ELETTR.(V2)
SCATOLA PORTAMASCHI 4 VIE
SCATOLA PORTAFEMMINE 4 VIE
TRASFORMATORE TOR.40W 230V D77-27H29 C/C
DADO ESAGONALE ART.SERPRESS 4M ZN
1
1
2
1
1
2
3
3
1
2
1
1
2
1
1
1
1
2
1
2
2
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1960588
1960205
1960168
1960101
1960100
1960303
1960304
1960105
1960412
1960566
1961078
1960243
1960171
1960200
1960346
1961131
1960568
1960218
1960166
1960407
1960256
1960324
1960254
1960148
1960239
1960318
1960432
1960258
1960015
1960250
1960634
1960135
1960023
1960022
1960047
1960164
1.330.017.521
1.330.016.962
1.330.016.946
1.330.016.903
1.330.016.902
1.330.016.999
1.330.017.000
1.330.016.907
1.330.017.078
1.330.017.166
1.330.016.976
1.330.016.948
1.330.016.959
1.330.017.582
1.330.017.034
1.330.017.168
1.330.016.967
1.330.016.944
1.330.017.073
1.330.016.987
1.330.017.014
1.330.017.611
1.330.016.940
1.330.016.975
1.330.017.007
1.330.017.087
1.330.016.989
1.330.016.844
1.330.016.982
1.330.016.891
1.330.016.933
1.330.016.852
1.330.016.851
1.330.016.872
1.330.016.942
8
POS SERVICE CODE FAN CODE
DESCRIPTION
DESCRIZIONE
NR
628
629
630
632
633
TOROID SUPPORT
WASHER 5X34 2MM
NUT
REFINING COVER F. EASY CUBE
SECURING PIN D4,6X11
SUPPORTO TOROIDE 40-60W (V2)
RONDELLA D.7,5X34 SP.2 MM
DADO AD ALETTE M4
TAPPO RIFINITURA PER EASY CUBE
CLIP D4,6X11 ART.000670111 BK
1
1
1
2
1
1960294
1960302
1960301
1960103
1960224
1.330.016.996
1.330.016.998
1.330.016.997
1.330.016.905
1.330.016.971
9
FGL 9016XS 9925186
630004861
POS SERVICE
CODE
FAN CODE
1
2
3
5
6
7
8
10
11
12
13
14
15
16
100
101
102
103
104
105
1.330.017.023 SELF SUPPORTING FILTER SIFIM X (FRANKE)
1.330.016.970 GRILLE HINGE PIN D.510-050
1.330.017.089 SPOTLIGHT SUPPORT
MAIN BODY X K03 W/GLASS 90
1.330.017.564 LIGHTING COVER
1.330.017.604 VITE 2,2X7,5 TSP TORX SPU INOX
1.330.017.599 GROUP ELECTROLIGHTS INOX
1.330.017.655 INVERTER BOX COVER
1.330.017.673 INVERTER F. ELECTROLUMINESCENT L.
1.330.017.656 INVERTER BOX
1.330.016.969 CABLE INLET GROMET D13
1.330.016.853 FEMALE PLUG BOX 2 WAYS
1.330.016.854 MALE PLUG BOX 2 WAYS
1.330.017.060 BUILT IN SPOTLIGHT S1000
1.330.017.573 CONTROL GROUP
1.330.017.646 CONTROL BOARD GLASS FRANKE PC
1.330.017.041 CONTROL BOX
1.330.016.888 SCHEDA TASTIERA 6-1 DIGIT ROSSI ORIZZ.
1.330.016.928 COMMANDS COVER PP-V2
STAFFA FISS.COMANDI ELN RETT.ZN
PIEGATA
1.330.016.885 FLAT COMANDI 60 6 VIE L=900
1.330.016.861 9WAYS MALE CONNECTOR (V2)
1.330.016.906 CABLE CLAMP (HI-LO)
1.330.017.578 POWER PACK HI-LO HIP 4V
1.330.016.937 ELECTRIC COVER (V2)
1.330.016.956 CONDENSER BLOCKING
1.330.016.892 MOTOR ASSEMBLY HI-LO HIP
1.330.016.860 CONNECTOR STS 240 A1 (CLII)
1.330.016.862 FEMALE 9 WAYS CONNECTOR (V2)
1.330.016.951 LOWER DIFFUSER (V2)
1.330.016.908 MOTOR CABLE CLAMP
1.330.016.837 MOTORE 8/35K-A 4V 220-240
1.330.016.963 SX D140 M8 ROTOR (V2)
106
107
108
300
301
303
304
305
306
307
308
309
310
1960327
1960222
1960434
1961123
1961124
1961125
1961126
1961127
1986128
1961129
1960220
1960024
1960025
1960387
1960712
1960128
1960627
1960628
1960129
1961130
1960629
1960032
1960104
1960630
1960142
1960195
1960631
1960031
1960033
1960182
1960106
1960632
1960206
DESCRIPTION
DESCRIZIONE
NR
FILTRO AUTOPORTANTE SIFIM X (FRANKE)
PERNO ROTAZIONE GRIGLIA
SUPPORTO FARETTI X PIEGATO
SCOCCA MODA LUMIA/2 EL K03 X 90 C/VETRO
COPERCHIO SUP.C/LUMIN.X PIEGATO(MODA/2)
VITE 2,2X7,5 TSP TORX SPU INOX
GRUPPO ELETTROLUMINESCENZA INOX-TRASP.
COPERCHIO SCATOLA INVERTER
INVERTER 12V PER ELETTROLUMINESCENZA
SCATOLA INVERTER
PASSACAVO GOMMA D13 ART.M11V
SCATOLA PORTAFEMMINE 2 VIE
SCATOLA PORTAMASCHI 2 VIE
FARETTO AD INCASSO S1000 20W C/FASTON
GRUPPO COM.K-CS/M-CS 6-1D ORIZ.FRANKE
VETRINO COMANDI FRANKE PC
SCATOLA COM.6-1 D.FRANKE GM S.M-CS OR
SCHEDA TASTIERA 6-1 DIGIT ROSSI ORIZZ.
COPERCHIO COMANDI PA 6.8 V0
STAFFA FISS.COMANDI ELN RETT.ZN PIEGATA
2
2
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
FLAT COMANDI 60 6 VIE L=900 C/CONNETTORI
CONNETTORE MASCHIO 9 VIE V2
BLOCCACAVO (HI-LO)
GRUPPO M.HI-LO HIP 4V CLII
COPERCHIO IMPIANTO ELETTRICO (V2)
FERMACONDENSATORE (V0)
CONDENSATORE 6,3MF 400V 10000 ORE
CONNETTORE STS 230 A1 SPINA 2P
CONNETTORE FEMMINA 9 VIE V2
DIFFUSORE INFERIORE (V2)
BLOCCACAVO MOTORE (V2)
MOTORE 8/35K-A 4V 220-240
ASS.GIRANTE SX D140 M8 (V2)
1
1
1
1
1
1
1
1
1
1
1
1
1
10
POS SERVICE
CODE
FAN CODE
DESCRIPTION
DESCRIZIONE
NR
311
313
314
315
316
320
324
328
329
501
502
503
504
505
508
509
509
602
603
604
606
607
608
609
610
613
614
615
616
617
618
619
620
624
625
1.330.016.950
1.330.017.521
1.330.016.962
1.330.016.946
1.330.016.903
1.330.016.902
1.330.016.999
1.330.017.000
1.330.016.907
1.330.017.078
1.330.017.166
UPPER DIFFUSER (V2)
MOTOR SUPPORT
DX D140 M8 ROTOR (V2)
IMPELLER SECURING-NUT
AIR-INLET RIGHT FLANGE (V2)
AIR-INLET LEFT FLANGE (V2)
SCREW 4x9
MOTOR FIXING SCREW
MOTOR RUBBER
UPPER CHIMNEY X F470
UPPER CHIMNEY FIXING BRACKET
BENT BRACKET ZN
FILTERING CONNECTION(DIVERTER)
SPACER CONNECTION FOR RECIRCULATING
REDUCTION FLANGE 150-120 BK
CAMINO INFERIORE RETT.X A745 S.FRANKE
LOWER CHIMNEY X A545
DIFFUSER BRACKET
PARTICULAR CABLE GUIDE
CAPTIVATED NUT 5004-A 4M
FIXING KIT
PLUG S8
ZINC PLATED SCREW
CABLE CLAMP
SUPPLY-CABLE COVER
BODY FIXING KNOB
SCREW 4,2X44
DIFFUSER SUPPORT ASS.STILO/3 ZN
CHARCOAL FILTER COVER
SUPPLY CABLE 2X0,75X2100 542+844 IT.PLUG
MAIN CABLE BOX
SCHEDA BASE M-CS M8 4V 220V 50/60HZ
MAIN CABLE BOX COVER
MALEHOLDER BOX
FEMALEHOLDER BOX
DIFFUSORE SUPERIORE (V2)
SUPPORTO MOTORE ZN M8
ASS.GIRANTE DX D140 M8 (V2)
DADO GIRANTE
FLANGIA ENTRATA ARIA DX (V2)
FLANGIA ENTRATA ARIA SX (V2)
VITE 4X9 AFLLS TMT D14 FR PZ PMT
VITE FISSAGGIO MOTORE 8
GOMMINO MOTORE 8c
CAMINO SUPERIORE RETT.X F470 PIEGATO
STAFFA FISSAGGIO CAMINO SUP.ZN PIEGATA
SUPPORTO RACC.FILTRANTE ZN
RACCORDO FILTRANTE (UP) (V2)
DISTANZIALE RACC.FILT.DISASS.(PARETE)
FLANGIA RIDUZIONE 150-120 BK
CAMINO INFERIORE RETT.X A745 S.FRANKE
CAMINO INFERIORE RETT.X A545 S.FRANKE
STAFFA DIFFUSORE P/H.E-CUBE ZN PIEGATA
PARTICOLARE PASSACAVO (V2)
DADO IN GABBIA Q 404-08 M4
FISSAGGIO CAPPA ASSIEMATO
TASSELLO S8 C FISCHER 51049
VITE ZINCATA M4X40 TC CACC.
STAFFA FERMACAVO
COPERCHIO CAVO ALIMENTAZIONE (V2)
POMELLO FISSAGGIO SCOCCA
VITE 4,2X44,4 T/T F.A PM ZN
SUPPORTO DIFFUSORE ASS.STILO/3 ZN
TAPPO C.A. (V2)
CAVO AL.2X0,75X2100 W 542+844 SP.ITALIA
SCATOLA IMPIANTO ELETTRICO (V2)
SCHEDA BASE M-CS M8 4V 220V 50/60HZ
COPERCHIO SCATOLA IMPIANTO ELETTR.(V2)
SCATOLA PORTAMASCHI 4 VIE
SCATOLA PORTAFEMMINE 4 VIE
1
1
1
2
1
1
2
3
3
1
2
1
1
2
1
1
1
1
2
1
2
2
1
1
1
1
2
1
1
1
1
1
1
1
1
1960181
1960588
1960205
1960168
1960101
1960100
1960303
1960304
1960105
1960412
1960566
1961078
1960243
1960171
1960200
1961131
1960346
1960568
1960218
1960166
1960407
1960256
1960324
1960254
1960148
1960239
1960318
1960432
1960258
1960015
1960250
1960634
1960135
1960023
1960022
1.330.016.976
1.330.016.948
1.330.016.959
1.330.017.582
1.330.017.034
1.330.017.168
1.330.016.967
1.330.016.944
1.330.017.073
1.330.016.987
1.330.017.014
1.330.017.611
1.330.016.940
1.330.016.975
1.330.017.007
1.330.017.087
1.330.016.989
1.330.016.844
1.330.016.982
1.330.016.891
1.330.016.933
1.330.016.852
1.330.016.851
11
POS SERVICE
CODE
FAN CODE
DESCRIPTION
DESCRIZIONE
QUA
NTIT
A’
626
627
628
629
630
632
633
1.330.016.872
1.330.016.942
1.330.016.996
1.330.016.998
1.330.016.997
1.330.016.905
1.330.016.971
TRANSFORMER TOR. 40VA (40 W)
EXAGON SELF-LOCKING NUT (SERPRESS)
TOROID SUPPORT
WASHER 5X34 2MM
NUT
REFINING COVER F. EASY CUBE
SECURING PIN D4,6X11
TRASFORMATORE TOR.40W 230V D77-27H29 C/C
DADO ESAGONALE ART.SERPRESS 4M ZN
SUPPORTO TOROIDE 40-60W (V2)
RONDELLA D.7,5X34 SP.2 MM
DADO AD ALETTE M4
TAPPO RIFINITURA PER EASY CUBE
CLIP D4,6X11 ART.000670111 BK
1
1
1
1
1
2
1
1960047
1960164
1960294
1960302
1960301
1960103
1960224
12
13
14
15
16
17
18