www.BDTIC.com/ICplus IP113A TP-FX Demo Board Operation Manual IP113A
by user
Comments
Transcript
www.BDTIC.com/ICplus IP113A TP-FX Demo Board Operation Manual IP113A
IP113A IP113A TP-FX Demo Board Operation Manual IC+ IP113A/M DEMO BOARD Rev B 08/30/2003 1: Use 5V DC adapter CONNECTOR +5V GND 2: Pin Description of DIP Switch SW2 LFP DIRECT_WIRE FAST_FWD TP_FORCE X_EN SPEED_MODE DUPLEX_MODE FX_FULL 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 SW DIP-10/SM 1 www.BDTIC.com/ICplus IP113A DIP SWITCH 1 NC 2 LFP 3 DIRECT WIRE 4 FAST_FWD 5 TP_FORCE 6 NC 7 OFF ON Disable(default) Enable DIRE CT FAST_F Function WD 0 0 Store and forward switch mode (default) 0 1 Modified cut-through switch mode 1 0 Converter mode 1 1 Converter mode with auto-change-forward function Disable(default) Enable X_EN Enable(default) Disable 8 SPEED_MODE (TP Port) 100M(default) 10M 9 DUPLEX_MODE (TP Port) Full(default) Half Full(default) Half 10 FX_FULL (FX Port) 3. LED 2 www.BDTIC.com/ICplus IP113A NOTE: 1. If user wants to change any option setting, he must push reset button. 2. AUTO_SEND and AUTO_TEST are not supported in IP113A. 3. LED_RMT_TP_SPD, LED_RMT_TP_LINK and LED_RMT_TP_LINK are not supported in IP113A. 4. ADDR0~ADDR4 PHY address are not supported in IP113A. 5. Above are supported in IP113M. (Item 2~4 are supported in IP113M). 4: Technical Service Window e_mail:[email protected] (End) 3 www.BDTIC.com/ICplus