...

SETTLEMENT PLATE of FDOT 2014

by user

on
Category: Documents
80

views

Report

Comments

Transcript

SETTLEMENT PLATE of FDOT 2014
Threaded or Socket Type Cap.
Stamp or label with Installation Date, Location and Identification Number
(when Socket Type Cap is used drill 14" diameter holes and secure with wire.
Threaded Type Caps to be hand tightened.)
Stem To Be Plumb
212" Steel or PVC Schedule 40 Pipe (Casing).
2’ Min.
Top Of Lift Or
Top Of Full Surcharge
Casing to be installed in 5’ sections, as required.
Threaded or Socket Type Fittings (PVC Socket Type shown)
PVC casing sections not permitted below steel sections
6-2"x8" Treated Timbers
Fill Within 3’ Of Stem
Surcharge
Coupling (As Required)
Shall Be Compacted By
(Compacted Fill )
Hand To Required Density
Cement when Socket Type Coupling used
2"x6" Treated Timber
Top Of Strata To Be Surcharged
Plate To Be Seated (Level) After Clearing
And Grubbing & Demucking Operations And
1
2"
Prior To Placing First Fill Lift
Dia. Bolt, Nut & Washer
(Bolt thread end up)
Iron Coupling (As Required)
INSTALLATION
4’
1" Iron Pipe (Marker)
PLAN
Lower pipe section to be 4’-6" in length
C:
\d\projects\standards\structures\current\ready4release\2014BOOK\00540-1of1.
dgn
TIMBER PLATE
NOTES:
Added pipe sections to be 5’-0" in length
1. Elevation of the top of each length of marker
pipe shall be determined as soon as it is installed
and also immediately before the next length of
marker pipe is added.
2. Settlement plate locations shall be flagged and
protected from construction vehicles and equipment.
If settlement plates are disturbed, they shall be
replaced in kind.
3. Oakum used to construct seal should not have a
mesh covering (plastic or other synthetic material).
Oakum Seal
4. The settlement plates shall be paid for under
the contract unit price for Settlement Plate
6"
Assembly, AS.
Oakum Seal
Oakum Seal
Oakum Seal
Iron Pipe Cap
Iron Pipe unthreaded this end
6"
(See Detail Above)
6"
2"x6" Treated Timber
6"
Iron Pipe Cap
Iron Pipe Cap
Timber Plate
3
16
sm 970re
¢
5
8"
5
8"
Dia. Hole
6:
26:
52 PM
1
2"
Dia. Hex Head Bolt,
Nut & Washer. Deform
thread or use Jam Nut
TIMBER PLATE
1
2
x 24
3
16
¢
1
2
x 24
¢
1
2
x 24
Dia. Hole
1
2"
Dia. x 112" Hex Head
Bolt, Nut & Washer. Deform
thread or use Jam Nut
STEEL PLATE
STEEL PLATE
STEEL PLATE
LAST
REVISION
01/01/00
REVISIO N
6/24/2013
STEM AND PLATE OPTIONS
DESCRIPTION:
INDEX
FDOT 2014
DESIGN STANDARDS
SETTLEMENT PLATE
NO.
540
SHEET
NO.
1of 1
Fly UP