...

EUROPEAN METROLOGY PROGRAMME FOR INNOVATION AND

by user

on
Category: Documents
23

views

Report

Comments

Transcript

EUROPEAN METROLOGY PROGRAMME FOR INNOVATION AND
INRIM
An overview
Aldo Godone
Giornata di studio Metrologia del vuoto negli ambienti industriali - Torino - 27 giugno 2013
before INRIM
1935-2006
Istituto Elettrotecnico Nazionale
“Galileo Ferraris”
1968-2006
Istituto di Metrologia
“Gustavo Colonnetti”
2006
Istituto Nazionale di Ricerca Metrologica
(INRIM)
Giornata di studio Metrologia del vuoto negli ambienti industriali - Torino - 27 giugno 2013
mission
INRIM
 carries out and promotes scientific research
focused on metrology, materials science
and innovative technologies
 as NMI underpins the SI system
 disseminates and transfers scientific results,
technology and know-how to scientific,
industrial and service users
Giornata di studio Metrologia del vuoto negli ambienti industriali - Torino - 27 giugno 2013
organisation
Electromagnetics Division
Mechanics Division
Optics Division
Thermodynamics Division
Area of 16 ha
13 Buildings (39 000 m2) and one Underground Gallery
174 Laboratories
Other laboratories (detached units) in
– Polytechnic of Turin (flow dynamics)
– University of Pavia (radiochemistry, neutron
activation analysis).
Giornata di studio Metrologia del vuoto negli ambienti industriali - Torino - 27 giugno 2013
INRIM facts and figures
Campus 130 000 mq
50 laboratories
budget 30 million euro
109 researchers
91 technicians
28 administration employees
100 JRC publications
200 international
communications
90 research contracts
1 500 calibration certificates and
test reports
instrumentation value: 48
million euro
XIX century instruments
collection
60 grants and collaborations
40 master degrees and PhD
thesis
library with 23 700 volumes
and 1 400 scientific reviews
130 subscription reviews
50 seminars and scientific
events
750 visitors to the labs
Giornata di studio Metrologia del vuoto negli ambienti industriali - Torino - 27 giugno 2013
EUROPEAN METROLOGY PROGRAMME
FOR INNOVATION AND RESEARCH EMPIR
Joint programming of metrology research
coordination of national metrology research programmes
22 participating states in EMRP
27 participating states in EMPIR
jointly agreed strategic research agenda
implemented by EURAMET e.V.
highly integrated
EMPIR A185
500 - 600 M€, 1/2 from EU, 7 call cycles
EMRP A169/185 400 M€, 1/2 from EU, 5 calls
iMERA-plus EMRP A169/185 63 M€, 1/3 from EU1 call
2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022
FP7
Horizon 2020
http://www.euramet.org/index.php?id=emrp_calls_and_projects
Giornata di studio Metrologia del vuoto negli ambienti industriali - Torino - 27 giugno 2013
EUROPEAN METROLOGY PROGRAMME
FOR INNOVATION AND RESEARCH EMPIR
The structure of EMPIR
Science
(48 %)
Fundamental scientific metrology
Grand challenges Energy, Environment, Health
Innovation
(22%)
Industry-driven joint research
Technology-transfer projects
Pre-normative
(10 %)
Pre- and co-normative metrology R&D
Capacity building
(15 % )
R&D for measurement capabilities
Capacity building projects
Running costs, central support
(5 % )
Giornata di studio Metrologia del vuoto negli ambienti industriali - Torino - 27 giugno 2013
EUROPEAN METROLOGY PROGRAMME
FOR INNOVATION AND RESEARCH EMPIR
The main activities of EMPIR shall consist of the following joint research and
technological development actions:
A scientific-technical programme which supports fundamental scientific
metrology
applied metrology research
metrology related services;
Metrology research for energy, environment and health;
Research into novel measurement instrumentation aiming at industrial take-up
of metrological technologies to stimulate innovation in industry;
Pre-normative and co-normative metrology research and development for
priority standards aiming to use the expertise of metrology institutes in Europe
to support policy implementation and accelerate innovative products and
services to market;
Metrology capacity-building activities on different technological levels aiming to
achieve a balanced and integrated metrology system in Europe.
Giornata di studio Metrologia del vuoto negli ambienti industriali - Torino - 27 giugno 2013
EUROPEAN METROLOGY PROGRAMME
FOR INNOVATION AND RESEARCH EMPIR
The main activities shall be carried out by NMI and DI.
EMPIR shall encourage and support the participation of other
entities. This approach is expected to lead to around 15% of the
budget of EMPIR going to those entities.
Giornata di studio Metrologia del vuoto negli ambienti industriali - Torino - 27 giugno 2013
Fly UP