WELDING PROCEDURE SPECIFICATION (WPS) PREQUALIFIED QUALIFIED BY TESTING

STATE OF FLORIDA DEPARTMENT OF TRANSPORTATION
WELDING PROCEDURE SPECIFICATION (WPS)
PREQUALIFIED
QUALIFIED BY TESTING
AWS D1.4 REINFORCING STEEL
Contractor/Organization:
FCAW-S
FCAW-G
Welding
Process:
GMAW
SMAW
Weld Type
Groove
Fillet
JOINT TYPE
Direct Butt
Indirect Butt
T-Joint
Position:
Groove Type:
Root Opening:
Root Face Dimension:
Groove Angle:
Backing:
Yes
No
Backing Type:
Backgouging:
Yes
No
Method:
TECHNIQUE:
Stringers
Weave
FILLER METALS
AWS Specification:
AWS Classification:
PREHEAT/INTERPASS
Pass
Numbers
Electrode
Diam.
Preheat/Interpass Temp. Min.:
WELDING PROCESS
Current
Volts
Type
Amp Range
Range
Identification :
Revision:
Date:
By:
Authorized By:
Date:
Supporting PQR No. (s):
ELECTRICAL CHARACTERISTICS
Current:
AC
DCEP
DCEN
Short-Circuiting
Transfer Mode (GMAW):
Globular
Spray
BASE METALS
Material Spec:
Grade:
Welded to:
Material Spec:
Grade:
Maximum Carbon Equivalent:
Bar Size:
Plate Thickness:
Coated Bar:
Yes
No
Type of Coating:
SHIELDING
Gas:
Single
Mixture
Composition:
Flow Rate:
Interpass Temp. Max.:
FOR FDOT USE ONLY
Elec.
Stickout
Travel
Speed
FOR CERTIFIED WELDING INSPECTOR (CWI) USE ONLY
Signature
Date
JOINT DETAILS
FOR FDOT CONSULTANT USE ONLY
Comments:
Return this completed form to the FDOT State Materials Office Structural Materials Systems Field Operations Office.
675-070-12
MATERIALS
05/15